[1] I. Gibson, D. Rosen, e B. Stucker, «Additive Manuf acturing Technologies», Second edit ion., Springer, 2015.
[2] T. Reiher, U. Jahnke, R. Koch, e C. Lindemann, «Towards a sustainable and economic selection of part candidates f or additive manuf acturing», Rapid Prototyping Journal, vol. 21, n. 2, pp. 216–227, Mar. 2015.
[3] L. Hitzler, M. Merkel, W. Hall, e A. Öchsner, «A Review of Metal Fabricated with Laser- and Powder-Bed Based Additive Manuf acturing Techniques: Process, Nomenclature, Materials, Achievable Properties, and its Utilization in the Medical Sector», Advanced Engineering Materials, vol. 20, n. 5, p.
1700658, Mai. 2018.
[4] J. Xu, X. Gu, D. Ding, Z. Pan, e K. Chen, «A review of slicing methods f or directed energy deposition based additive manuf acturing», Rapid Prototyping Journal, 2018.
[5] «ASTM F2792-12a, Standard Terminology f or Additive Manuf acturing Technologies, (Withdrawn 2015), ASTM International, West Conshohocken, PA, 2012». .
[6] «ISO/ASTM 52900:2015 Additive manuf acturing -- General principles -- Terminology». . [7] «7 Families of Additive Manuf acturing ». .
[8] C. R. Deckard, «Part generation by layer-wise selective laser sintering», MS thesis, University of Texas, Austin, TX, 1986.
[9] W. J. Sames, F. A. List, S. Pannala, R. Dehof f , e S. Babu, «The metallurgy and processing science of metal additive manuf acturing», International Materials Reviews, vol. 61, pp. 1–46, 2016.
[10] W. E. Frazier, «Metal Additive Manuf acturing: A Review», Journal of Materials Engineering and Performance, vol. 23, n. 6, pp. 1917–1928, Jun. 2014.
[11] Y. Zhang et al., «Additive Manuf acturing of Metallic Materials: A Review», Journal of Materials Engineering and Performance, vol. 27, n. 1, pp. 1–13, Jan. 2018.
[12] E. Sachs, M. Cima, e J. Cornie, «Three-Dimensional Printing: Rapid Tooling and Prototypes Directly f rom a CAD Model», CIRP Annals, vol. 39, n. 1, pp. 201–204, Jan. 1990.
[13] I. Rishmawi, M. Salarian, e M. Vlasea, «Tailoring green and sintered density of pure iron parts using binder jetting additive manuf acturing», Additive Manufacturing, vol. 24, pp. 508–520, Dez. 2018.
[14] Y. Bai e C. B. Williams, «Binder jetting additive manuf acturing with a particle-f ree metal ink as a binder precursor», Materials & Design, vol. 147, pp. 146–156, Jun. 2018.
[15] Bai Yun, «An exploration of binder jetting of copper», Rapid Prototyping Journal, vol. 21, n. 2, pp. 177–185, Jan. 2015.
[16] Y. Bai, G. Wagner, e C. B. Williams, «Ef f ect of Particle Size Distribution on Powder Packing and Sintering in Binder Jetting Additive Manuf acturing of Metals», Journal of Manufacturing Science and Engineering, vol. 139, n. 8, Jun. 2017.
[17] S. Nowotny, T. Himmer, A. Techel, e E. Beyer, Recent developments in laminated tooling by multiple laser processing. 2002.
[18] G. Zak e W. Xu Wang, «Adhesive Bonding of Sheet f or Laminated Metal Tooling», apresentad o na Thirteenth Solid Freef orm Fabrication (SFF) Symposium, The University of Texas, Austin, 2002, pp. 502–509.
[19] S. H. Yoon e S.-J. Na, «Rapid Laminated Tooling by a Brazing and Soldering Process», Journal of Manufacturing Processes, vol. 5, pp. 118–126, Dez. 2003.
[20] A. H. Alami, Using Laminated Metal Tooling (LMT) in die manufacturing for clay moulding. 2008.
[21] H. T. Fujii, M. R. Sriraman, e S. S. Babu, «Quantitative Evaluation of Bulk and Interf ace Microstructures in Al-3003 Alloy Builds Made by Very High Power Ultrasonic Additive Manuf acturing», Metallurgical and Materials Transactions A, vol. 42, n. 13, pp. 4045–4055, Dez. 2011.
[22] S. Shimizu, H. T. Fujii, Y. S. Sato, H. Kokawa, M. R. Sriraman, e S. S. Babu, «Mechanism of weld f ormation during very-high-power ultrasonic additive manuf acturing of Al alloy 6061», Acta Materialia, vol. 74, pp. 234–243, Ago. 2014.
[23] R. P. Mudge e N. R. Wald, «Laser engineered net shaping advances additive manuf acturing and repair», Welding Journal (Miami, Fla), vol. 86, pp. 44–48, Jan. 2007.
[24] M. Domack, K. Taminger, e M. Begley, «Metallurgical Mechanisms Controlling Mechanical Properties of Aluminium Alloy 2219 Produced by Electron Beam Freef orm Fabrication», Materials Science Forum - MATER SCI FORUM, vol. 519–521, pp. 1291–1296, Jan. 2006.
[25] S. M. Thompson, L. Bian, N. Shamsaei, e A. Yadollahi, «An overview of Direct Laser Depo sition f or additive manuf acturing; Part I: Transport phenomena, modeling and diagnostics», Additive Manufacturing, vol. 8, pp. 36–62, Out. 2015.
[26] Y. Zhai, D. A. Lados, e J. L. LaGoy, «Additive Manuf acturing: Making Imagination the Major Limitation», JOM, vol. 66, n. 5, pp. 808–816, Mai. 2014.
[27] J. M. Wilson, C. Piya, Y. C. Shin, F. Zhao, e K. Ramani, «Remanuf acturing of turbine blades by laser direct deposition with its energy and environmental impact analysis», Journal of Cleaner Production, vol. 80, pp. 170–178, Out. 2014.
[28] S. W. Williams, F. Martina, A. C. Addison, J. Ding, G. Pardal, e P. Colegrove, «Wire + Arc Additive Manuf acturing», Materials Science and Technology, vol. 32, n. 7, pp. 641–647, Mai. 2016.
[29] C. Lieberwirth, A. Harder, e H. Seitz, «Extrusion Based Additive Manuf acturing of Metal Parts», Journal of Mechanics Engineering and Automation, vol. 7, Fev. 2017.
[30] M. Annoni, H. Giberti, e M. Strano, «Feasibility Study of an Extrusion-based Direct Metal Additive Manuf acturing Technique», Procedia Manufacturing, vol. 5, pp. 916–927, Jan. 2016.
[31] Q. Liu e M. Orme, «High precision solder droplet printing technology and the state-of -the-art», Journal of Materials Processing Technology, vol. 115, n. 3, pp. 271–283, Set. 2001.
[32] C. Ladd, J.-H. So, J. Muth, e M. D. Dickey, «3D Printing of Free Standing Liquid Metal Microstructures», Advanced Materials, vol. 25, n. 36, pp. 5081–5085, Set. 2013.
[33] K. Yamaguchi, «Generation of 3-dimensional microstructure by metal jet», Microsystem Technologies, vol. 9, n. 3, pp. 215–219, Jan. 2003.
[34] J.-P. Kruth, P. Mercelis, J. Van Vaerenbergh, L. Froyen, e M. Rombouts, «Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting», Rapid Prototyping Journal, vol. 11, pp. 26–
36, Fev. 2005.
[35] «SLM Trademark of SLM Solutions GMBH - Registration Number 4416715 - Serial Number 85507057 :: Justia Trademarks». [Em linha]. Disponível em: http://trademarks.justia.com/855/07/slm-85507057.html. [Acedido: 01-Set-2019].
[36] S. Das, «Physical Aspects of Process Control in Selective Laser Sintering of Metals», Advanced Engineering Materials, vol. 5, n. 10, pp. 701–711, Out. 2003.
[37] J. A. Cherry, H. M. Davies, S. Mehmood, N. P. Lavery, S. G. R. Brown, e J. Sienz, «Investigation into the ef f ect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting», The International Journal of Advanced Manufacturing Technology, vol.
76, n. 5, pp. 869–879, Fev. 2015.
[38] H. Meier e Ch. Haberland, «Experimental studies on selective laser melting of metallic parts», Materialwissenschaft und Werkstofftechnik, vol. 39, n. 9, pp. 665–670, Set. 2008.
[39] I. Yadroitsev, Selective laser melting: Direct manufacturing of 3D-objects by selective laser melting of metal powders. 2009.
[40] M. Cloots, A. Spierings, e K. Wegener, Assessing new support minimizing strategies for the additive manufacturing technology SLM. 2013.
[41] T. Mukherjee, J. S. Zuback, A. De, e T. DebRoy, «Printability of alloys f or addi tive manuf acturing», Scientific Reports, vol. 6, p. 19717, Jan. 2016.
[42] A. Spierings e G. Levy, Comparison of density of stainless steel 316L parts produced with Selective Laser Melting using different powder grades. 2009.
[43] A. Laohaprapanon et al., Optimal Scanning Condition of Selective Laser Melting Processing with Stainless Steel 316L Powder, vol. 341–342. 2012.
[44] G. Miranda et al., «Predictive models f or physical and mechanical properties of 316L stainless steel produced by selective laser melting», Materials Science and Engineering: A, vol. 657, pp. 43–56, Mar. 2016.
[45] R. Morgan, C. J. Sutcliffe, e W. O’Neill, «Density analysis of direct metal laser re-melted 316L stainless steel cubic primitives», Journal of Materials Science, vol. 39, n. 4, pp. 1195–1205, Fev. 2004.
[46] A. Röttger, K. Geenen, M. Windmann, F. Binner, e W. Theisen, «Comparison of microstructure and mechanical properties of 316L austenitic steel processed by selective laser melting with hot -isostatic pressed and cast material», Materials Science and Engineering: A, vol. 678, pp. 365–376, Dez. 2016.
[47] E. Yasa, J. Deckers, J.-P. Kruth, M. Rombouts, e J. Luyten, «Investigation of Sectoral Scanning in Selective Laser Melting», n. 49187, pp. 695–703, 2010.
[48] A. B. Spierings, M. Schneider, e R. Eggenberger, «Comparison of density measurement techniques f or additive manuf actured metallic parts», Rapid Prototyping Journal, vol. 17, n. 5, pp. 380–
386, Ago. 2011.
[49] J.-P. Kruth, M. Badrossamay, E. Yasa, J. Deckers, L. Thijs, e J. Humbeeck, Part and material properties in selective laser melting of metals. 2010.
[50] C. [Lawrence L. N. Lab. (LLNL) Kamath Livermore, CA (United States)], B. [Lawrence L. N. Lab.
(LLNL) El-dasher Livermore, CA (United States)], G. F. [Lawrence L. N. Lab. (LLNL) Gallegos Livermore, CA (United States)], W. E. [Lawrence L. N. Lab. (LLNL) King Livermore, CA (United States)], e A. [Stanf ord Univ. Sisto CA (United States)], «Density of Additively -Manuf actured, 316L SS Parts Using Laser Powder-Bed Fusion at Powers Up to 400W», United States, Dez. 2013.
[51] J.-P. Kruth, J. Deckers, E. Yasa, e R. Wauthlé, «Assessing and comparing inf luencing f actors of residual stresses in selective laser melting us ing a novel analysis method», Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 226, n. 6, pp. 980–
991, Mar. 2012.
[52] Z. Sun, X. Tan, S. B. Tor, e W. Y. Yeong, «Selective laser melting of stainless steel 316L with low porosity and high build rates», Materials & Design, vol. 104, pp. 197–204, Ago. 2016.
[53] B. Qian e Z. Shen, «Laser sintering of ceramics», Journal of Asian Ceramic Societies, vol. 1, Dez. 2013.
[54] H. Yeung, B. Lane, J. Fox, F. Kim, J. Heigel, e J. Neira, Continuous laser scan strategy for faster build speeds in laser powder bed fusion system. 2017.
[55] H. Yeung, B. M. Lane, M. A. Donmez, J. C. Fox, e J. Neira, «Implementation of Advanced Laser Control Strategies f or Powder Bed Fusion Systems», Procedia Manufacturing, vol. 26, pp. 871–879, Jan. 2018.
[56] F. Klocke, C. Wagner, e C. Ader, «Development of an Integrated Model f or Selective Metal Laser Sintering - PDF». [Em linha]. Disponível em: https://docplayer.net/18693330-Development-of -an-integrated-model-f or-selective-metal-laser-sintering.html. [Acedido: 09-Set-2019].
[57] E. Herderick, «Additive manuf acturing of metals: A review», vol. 2, pp. 1413–1425, Jan. 2011.
[58] X. J. Wang, L. C. Zhang, M. H. Fang, e T. B. Sercombe, «The ef f ect of atmosphere on the structure and properties of a selective laser melted Al–12Si alloy», Materials Science and Engineering:
A, vol. 597, pp. 370–375, Mar. 2014.
[59] J. Elmer, J. Vaja, H. Carlton, e R. Pong, The Effect of Ar and N-2 Shielding Gas on Laser Weld Porosity in Steel, Stainless Steels, and Nickel, vol. 94. 2015.
[60] S. Katayama, N. Seto, M. Mizutani, e A. Matsunawa, «Formation mechanism of porosity in high power YAG laser welding», ICALEO, vol. 2000, n. 1, pp. C16–C25, Out. 2000.
[61] S. Vock, B. Klöden, A. Kirchner, T. Weißgärber, e B. Kieback, «Powders f or powder bed f usion:
a review», Progress in Additive Manufacturing, Fev. 2019.
[62] M. Mani, M. Donmez, S. Feng, S. Moylan, R. Fesperman, e B. Lane, Measurement Science Needs for Real-time Control of Additive Manufacturing Powder Bed Fusion Processes. 2015.
[63] G. Levy, N. Herres, e A. B. Spierings, «Inf luence of the particle size distribution on surf ace quality and mechanical properties in AM steel parts», Rapid Prototyping Journal, vol. 17, n. 3, pp. 195–
202, Abr. 2011.
[64] S. Z. Uddin, L. E. Murr, C. A. Terrazas, P. Morton, D. A. Roberson, e R. B. Wicker, «Processing and characterization of crack-f ree aluminum 6061 using high-temperature heating in laser powder bed f usion additive manuf acturing», Additive Manufacturing, vol. 22, pp. 405–415, Ago. 2018.
[65] K. Kempen, B. Vrancken, S. Buls, L. Thijs, J. Humbeeck, e J. -P. Kruth, «Selective Laser Melting of Crack-Free High Density M2 High Speed Steel Parts by Baseplate Preheating», Journal of Manufacturing Science and Engineering, vol. 136, Dez. 2014.
[66] M. M. DEWIDAR, K. A. KHALIL, e J. K. LIM, «Processing and mechanical properties of porous 316L stainless steel f or biomedical applications», Transactions of Nonferrous Metals Society of China, vol. 17, n. 3, pp. 468–473, Jun. 2007.
[67] J. Deckers, E. Yasa, e J. Kruth, «The investigation of the inf luence of laser re‐melting on density, surf ace quality and microstructure of selective laser melting parts», Rapid Prototyping Journal, vol. 17, n. 5, pp. 312–327, Ago. 2011.
[68] A. Mertens, S. Reginster, Q. Contrepois, T. Dormal, O. Lemaire, e J. Lecomte -Beckers,
«Microstructures and Mechanical Properties of Stainles s Steel AISI 316L Processed by Selective Laser Melting», Materials Science Forum, vol. 783–786, pp. 898–903, Abr. 2014.
[69] «A Comprehensive List of all the Metal 3D Printer Manuf acturers», 3Dnatives, 02-Set-2019. .
[70] «SLM Solutions Group AG: SLM®800». [Em linha]. Disponível em: https://www.slm-solutions.com/en/products/machines/slmr800/. [Acedido: 15-Set-2019].
[71] «IRS-I: Self -Contained Thermal Imaging Systems», AT - Automation Technology. .
[72] «Krautkramer - USM 36 - Ultrasound-Portable Flaw Detectors - Portable Flaw Detectors by GE Measurement & Control Solutions». [Em linha]. Disponível em: https://www.environmental -expert.com/products/krautkramer-model-usm-36-portable-f law-detectors-354915. [Acedido: 27Out -2019].
[73] W. Meiners, Direktes selektives Laser-Sintern einkomponentiger metallischer Werkstoffe.
Shaker, 1999.