Plug the power connector on the underside of the base and the other end of the cable into an electrical outlet. Place the cover back on the handset by pushing it up until it closes completely. Remove the protective film from the screen, place the handset on the stand to fully charge the batteries.
For optimal battery charging, leave the handset on the base for at least 6 hours between first use. The screen displays information including the name and number of the handset (for example, HANDSET -2 -), date and time. Take your base, remove the SIM card compartment (reference number 2) located on the right side.
Place the compartment unit and card SIM into the housing on the base (reference mark 1). During communication, you can increase or decrease the audio volume of your handset by pressing the key or on the navigator.
Receiving a call
Busy ON (*67*) - Activation of call forward in case of line busy function: enter a number of your choice, then press. Fixed Ca ON (*53*) - Activation of the fixed call function: enter an emergency number of your choice, then press. ON (*31*) - Activate the rejection display of your number for the next call: enter this number, then press.
OFF (#31*) - Deactivate the rejection display of your number for the next call: enter this number, then press.
During a call
G ETTING STARTED
You can also set up a three-party conference if the second call is placed from your terminal (depending on your subscription). Receiving a second call while on the line During the call, you will hear a beep to let you know that a second call is waiting. Your other caller is then put on hold and you can talk to your second caller.
During communication, you can press Menu to resume the call before it is picked up by the device you called. The ongoing call is put on hold, and you can then take the second call. The ongoing call is definitely terminated, and you can then take the second call.
Three-way calls are only possible when the second call is made from your phone. Accessing the phonebook or call log During communication, you can access your phonebook to look up a phone number, a name contained in an entry or information about calls stored in your call log.
Secret mode
Ending a call
Entering a number in the phonebook
All the information you have entered appears on the screen in the form of an entry. You can see the beginning of your contact's name preceded by a number type icon.
Communication between two handsets
Sending an SMS
It indicates the type of transmission and the number your message is being sent to.
M ENU STRUCTURE
Y OUR PHONEBOOK
Creating an entry
Viewing the phonebook
Editing an entry
Deleting an entry
Searching for a contact
Performing a quick search
Import part or all of a SIM card directory
From the SIM card directory, select the numbers to be transferred using the or buttons.
Transfer all or part of the phonebook
Transfer by intercommunication
Carry out the operation until you have transferred all the numbers you want to transfer.
Using a phonebook entry to place a call
Sending a text message
Writing a text message
SMS SERVICE
If you enter the wrong letter, press Delete or C key on the navigator key to delete letter by letter. When the uppercase mode is selected, the symbol is displayed at the top of the screen. EATONI predictive text input assistance For text input assistance, you can activate the EATONI predictive text input assistance.
When you press a key on the numeric keypad, EATONI offers you as the first choice the letter (among all those corresponding to the pressed key) which is statistically most likely to be desired (depending on the previously entered characters). To enable or disable EATONI, press Option on the text input screen and then select Activate Eatoni or Deact. If the letter does not match the letter you want, press repeatedly to change it until you get the letter you want.
When you have finished writing your text message, press Option to select the delivery type. Send +: to send the text message specifying the options (refer to the paragraph Making a send + broadcast, page 25). The letters corresponding to the alphanumeric key on the keyboard are displayed on the upper left side of the screen (in the order that respects successive presses on the .. key).
Enter the number of your recipient just as you do for the simple transmission (see previous section). Once it's saved, you'll be able to fix potential problems and send your message at a later time without having to retype it.
Reading a message
The sender's personal box (page 29) selection menu is only displayed when at least one personal box has been created. Press or on the navigation key until the SMS menu appears, press OK to confirm. The list of messages in the folder is displayed from newest to oldest, and the date and time the message was received is highlighted on the top line.
If no personal box has been created, only the shared box will be displayed on the screen. To return to the list of messages, move to the beginning of the message and press Return. Reply: to write an SMS in response to the received message (the recipient number of the new SMS will be entered automatically).
Viewing the memory status
Press the navigation key or until the SMS screen is displayed, confirm with OK. A screen informs you of the number of messages in each folder (new, inbox, sent and draft). It also indicates the total number of messages saved and the amount of space available.
Emptying an SMS folder
SMS SETTINGS
Modifying the SMS centre number
Choose the SMS transmission center
Terminal number
Modifying the terminal number
For example, in the case of an SMS message addressed to the VADER device, your contact will send his SMS to:. Telephone number followed by the terminal number). Press the navigation key or. If your contact forgets to provide the terminal number, the SMS message will be sent to terminal 0 by default. If you do not assign a different number to each SMS device connected to the same line, you will not be able to receive SMS messages.
SMS boxes
Sub-Addressing
The subaddress is a number that must be added to the end of your phone number (11th digit) by those who want to send you a text message.
Creating a personal box
Viewing a message from a personal box
Modifying or removing a personal box
C ALL LOG
Viewing the received and dialed call log
Calling the last number dialed (Redial)
Calling a number listed in the dialed and received call log
Viewing the events log
Activate/deactivate the new events information screen
A CCESSORIES
Alarm clock
Setting the alarm clock
Activating or deactivating the alarm clock
Modifying the alarm clock time
Changing the alarm clock ring tone
Timer
Changing the programmed time of the timer
Changing the timer ring tone
Displaying or hiding the programmed time of the timer
Birthday or organiser alarms
Adding a new birthday (organiser) alarm
Viewing a birthday (or organiser) alarm
Modifying or deleting a birthday (or organiser) alarm
Monitoring a room
G AMES
Taquin
C USTOMIZING THE HANDSET
Changing the ring tones
Modify the idle screen
Modify the color of the menu backgrounds
Screensaver (Power-saver mode)
Activate or deactivate the Eco mode
Activating or deactivating the beeps
Activating/deactivating the silent mode
Record a personal ring tone
S ECURITY
Locking/unlocking the keypad
Programming an emergency number
Modifying the base code
Defining the call time limit
Once the changes are made, the information screen shows the new call period.
Defining forbidden prefixes - Call barring
Creating, modifying or deleting a forbidden prefix
Authorising three-way calling
S ETTINGS
Programming a key
Modifying the date and time
Adjusting the contrast
Using the auto hang up and pick up features
Installation guide
Modifying the Voice box number (PhoneMail)
Modifying the language
A DVANCED SETTINGS / H ANDSET SETTINGS
Registering a new handset to a base
Once the handset is registered, the handset automatically exits registration mode and tells you that the registration is complete.
Modifying the base preference
Resetting the handset
Personnal registering
Renaming the handset
A DVANCED SETTINGS / B ASE SETTINGS
Using a handset to put the base in registration mode
Re-initialising the base
De-registering a handset
Renaming the base
Modifying the network type
Modifying the dialing mode
Modifying the flash duration (R key)
Setting a PABX prefix
2nd call
To change the status, press Edit. The status is changed on the screen, press Confirm.
Caller’s Number
Care and Maintenance
Problems
A PPENDIX
F EATURES
E NVIRONMENTAL INFORMATION
Guarantee terms
G UARANTEE
