A telephone connection device designed to connect to a Belgacom analog telephone line of class TNV3 (telecommunications network voltage) as defined in EN60950. Do not immerse them in water, burn them or put them where they could be punctured.
Package Contents
Precautions
Installing and Charging the Batteries
Connecting the Base Station
Set the Handset Language
Twist 212 Handset Overview
In the phonebook list/redial list/call list: Press to scroll up through the list. During a call: Press to increase the volume. In the phonebook list/redial list/call list: Press to scroll through the list. During a call: Press to decrease the volume. During a call: Press to end a call and return to the idle screen In menu/edit mode: Press to return to the previous menu In menu/edit mode: Press and hold to return to the idle screen In idle mode: Press and hold to switch off the handset.
In standby mode/pre-dial mode/redial list/call list/book entry: press to make a call using the loudspeaker. 0 key in redial/edit number mode: Press and hold to insert a pause. 1, 2, 3 key in idle/on-hook mode: Press and hold to call a stored direct memory number. In redial list/call list/directory entry: Press to call the selected entry in the list.
Base Station Overview
Display Icons and Symbols
Make a Call
Answer a Call
End a Call
Adjust Earpiece and Handsfree Volume
Mute a Call
Set the Silent Mode
Turn on the Keypad Lock
Redial the Last Number
Find the Handset
Make an Internal Call
Note: If there is only one handset registered to the base, press C and “NOT POSSIBLE” will be displayed. The called handset rings and press T on the called handset to establish the internal call. Note: If there are only two handsets registered to the base station, you can immediately call another handset by pressing C.
Press O on the calling device or place the calling device on the charging cradle to end the current call with the external party. The conference call function allows one external call to be shared with two mobile phones (in intercom). Note: Any handset that hangs up during a conference call will leave the other handset still connected to the external call.
Each phone book entry can contain up to 20 digits for the phone number and 12 characters for the name.
Add a New Phonebook Entry
Search a Phonebook Entry
View a Phonebook Entry
Edit a Phonebook Entry
Delete a Phonebook Entry
Delete the Entire Private Phonebook
Check the Phonebook Usage
This function is available if you have subscribed to the Caller Line Identification service with Belgacom. If the number matches one of the entries in your private phone book, the caller's name stored in the private phone book is displayed alternately with the number.
View the Call List
Store a Call List Number into the Phonebook
Delete an Entry in the Call List
Delete the Entire List of the Call List
View the Details of the Call List Entry
Set the Category of the Call List
With a Belgacom subscription you can have your calls forwarded to Phonemail when you are absent. If the icon does not disappear, you can press and hold 4 while viewing the call log to manually disable the voicemail icon. Your phone comes with a number of settings that you can change to personalize your phone the way you want it to work.
Date and Time Settings
Alarm Settings
Handset Settings
If you enable Auto Answer, you can answer the call from the cradle without pressing any key.
Base Settings
A 4-digit system PIN code is used to change the system settings of the base station. Note: If the new PIN entered in Step 6 does not match the new system PIN entered in Step 5, the user is prompted to re-enter the valid system PIN in Step 5.
Registration
Reset Your Phone
The Equipment you have purchased has been carefully selected by Belgacom and is covered by a two-year warranty on parts and labor in the event of any material or manufacturing defect, unless otherwise specified. The addresses for our Teleboutiques and authorized agents are given in the Information Section of the White Pages. Your equipment will be repaired or replaced free of charge, on presentation of the receipt, in the event of any material or manufacturing defect.
The warranty on the repaired or replaced equipment ends on the date the original warranty on the purchased equipment expires, but is not less than 3 months. Belgacom is not liable for any indirect or immaterial loss suffered by the Customer as a result of the malfunctioning of the terminal equipment, such as loss of production, income or contracts. The General Terms and Conditions of Sale for Terminal Equipment can be obtained on request from any Belgacom service available to the public or on www.belgacom.be.
In the event of an electrical hazard, the mains adapter acts as a 230V current isolating device. As a safety measure, it should therefore be installed close to the appliance and be easily accessible. If it is not connected to the mains or if there is a power failure, telephones using cordless handsets will not work.
In the event of an emergency, you will not be able to make or receive calls. Do not use your phone to report a gas leak if you are standing near the leak. In case of contact, rinse the affected part with running water for about twenty minutes and seek emergency medical attention.
These systems will reuse or recycle most of the materials in your end-of-life equipment in a reliable manner. If you need more information about collection, reuse and recycling systems, contact your local or regional waste authority. You can also contact us for more information on the environmental performance of our products.
