Form K5726 Supersedes K5279
ILLUSTRATED LIST OF PARTS
FOR
CLASS 15K MACHINES
FOR MANUFACTURING USE
(Nos. 15K28, 15K30, 15K62 and 15K95)
•
SINGER
No. I5K28 Machine with Driving Attachment
1^ ,
SINGEH
w
No. 15K95 Machine
m
15147
125032
15275 80206
15248
Full Size PLATE 69
PLATE 72 Full Size
Hall Size PLATE 75
PLATE 80 Full Size
Full Size PLATE 81
PLATE 85 Full Size
85450
Full Size PLATE 86
PLATE 88 Full Size
Full S ze PLATE 218
85447
PLATE 221 Half Size
Full Size PLATE 792
35985
35984
25539 35983
Half Size PLATE 1152
PLATE 1159 Full Size
Half Size PLATE 1221
Half Size PLATE 1362
80217
80044
PLATE 1364 Half Size
Full Size PLATE 1366
86467 86468 86470 86477
ph
i
; om
O t85440 86181
u
86474 86189
PLATE 1371 Full Size
Full Size PLATE 1373
15048
15024
15145
Full Size PLATE 1375
80259
m
Full Size PLATE 1381
PLATE 1382 Full Size
120378
35571
26763%
m
PLATE 1384
i ^ f i
i
iiiihiinBllulU
imniimiiitmn imiiiiiimii
Full Size
652 662
51002 1293
yvyv4i yv/V44 nnuj
1513 1518 1519 1520 1528 1547
PLATE 1386 Quarter Size
i|
Full Size PLATE 1955
66601 66775 4-5847
140138
125376
PLATE 2058 Full Size
45308
80124 15497
PLATE 2105 Ful Size
D
Half Size PLATE 2106
Half Size PLATE 2108
PLATE 2109 Half Size
221807
80336 80335
iW
'ii i'
i
9 4 0 2 8 94048 94046
94036 94039
94029
94069 80028 94032 94044 55531
94038
94037 94033 94030 183
94040 SS599 55600 SS566
Full Size
PLATE 2115
193 226 335 399 443 460 570 635
Full Size PLATE 2409
PLATE 2410 Full Size
m m
Full Size PLATE 2412
PLATE 2413 Full Size
as
PLATE 2488 Full Size
86190"
Full Size PLATE 2489
86015 86464
PLATE 2490 Full Size
4784
Full Size PLATE 2491
ILLUSTRATED LIST OF PARTS
FOR
CLASS 15K MACHINES
FOR MANUFACTURING USE
(Nos. 15K28, 15K30, 15K62 and 15K95)
CONTENTS
Parts Complete for No. loK28 Machine II Special to No. 15K30 Machine ..
II Complete-for No. 15K62 Machine
II II II II II
Accessories
Attachments
Bobbin Winders
Driving Attachments
Hand Attachment for 15K95 Machine
Iron Base for 15K62 Machine
Pages
77
S3
80
92
09
100
116
122
121
124
INSTRUCTIONS FOR ORDERING
In ordering from this List, the prefix and affix letters with the part number MUST BE quoted exactly as they are shown in the first column.
A number always indicates the same part in whatever List it may appear, or
for whatever machine.
The affix letters {where shown) indicate the style of finish, as follows :—
A. Hardened, Polished, Nickel Plated and Buffed.
A.A. Buffed and Chromium I'lated.
A.B. Hardened. Polished, Buffed and Chromium Plated.
A.C. Jirown Baking Enamel Finish.
A.D. Grey Baking Enamel Finish.
A.E. Hardened, Bright Rumbled and Nickel Plated.
A.F. Hardened. Bright Rumbled and Nickel Plated, Bright Rumbled and Chromium Plated.
A.J. Polished, Nickel Plated and Chromium Plated.
A.K. Hardened, Polished, Nickel Plated and Chromium Plated.
A.L. Pleat Treated for Toughness.
B. Polished, Nickel Plated and Buffed.
C. Hardened only.
C.R. Hardened and Merlized.
D. Polished only.
E. Soft, not Polished.
F. Hardened and Polished.
F.J. Hardened, Polished and Nickel Plated.
G. Bright Rumbled and Nickel Plated.
H. Blued.
J. Nickel Plated only.
K. Hardened and Nickel Plated.
L. Brass Plated.
M. Oxidized.
N. Japanned. Dull.
P. Japanned, Bright.
P.P. Wrinkle Finish.- R. Merlized.
S. Cadmium Plated.
T. Copper Plated.
T.A. Hardened, Polished, Copper and Nickel Plated and Buffed, T.B. Copper and Nickel Plated and Polished.
T.J. Copper and Nickel Plated only.
T.K. Hardened, Copper and Nickel Plated.
T.L. Copper and Brass Plated, T.M. Copper Plated and Oxidized.
U. Zinc Plated.
V. Silver Plated.
W. Polished and Nickel Plated.
X. Black Oxide for Iron and Steel.
X.C. Hardened and Black Oxide for Iron and Steel.
Y. Black Nickel Plated only.
PARTS COMPLETE
FOR
No. 15K28 MACHINE
Drop Feed. C.B. SHUTTLE. For General Cloth Work.
No. I'lnio
•12.5001 — 125002 —
4389 2487 2002 2487 138e 1383 125003 2112 15498 2107 43.5c • 1384 144c 1383
8300 59 51224d 2115
2007 2107
2134 1362 80352 — 80002 —
448c 1384 NO'i
*2804 —
Arm
125001 with 43.5c, 448c, 154 04, 1.5486, 15498 and two 1540.5 Dowel Pin (2) (for repairs only)
ii (2) Screw (3) ...
Shaft
IP Bushing
II II Set Screw II Screw
Arm Side Cover
Thumb Screw
Balance Wheel (2i' pulley, heavy rim), with two 448c .1 II {21' II light rim), with two 448c II II (2^5' II heavy rim) for stop motion
II II Set Screw
Bed ...
specified on order.
78
No. Pi.itc 281! 35
•2812 — 158e ns:l 373c 1384 1318e 1383
PAia'S FOR Xo. 15K28 MACHINE
Crank Connecting Rod with 2812 and two 158e It Cap
rr rr ScfCW
ti Hinge Screw
IP IP II Nut ...
80053 2103 Face Plate 1901 1383 II tt Screw
80233 — Face Plate, complete, Nos. 233d, 448c, 460c. 2111, 80053, 80081, 80211, 80259 and 82358
2835 792 Feed Bar
315c 1384 II It Screw Centre (2)
1319j 1383 Nut (2) ...
125032 59 443c 2115
Feed Cam with 443c II II Set Screw
15226 1374 Feed Dog for General Work
80113 1366 Tailoring ...
80114 1366 It M II General Cloth Work 80115 1360 11 M M Shirt Work
208e 1383 n n Screw (2)
NOTE.—No. 15226 is sent with this machine unless otherwise specified on order.
2042 378c 1520r 1832 1085e
1384 1385 1385 2115
2816 55 2836 — 2509 2490
157j 1383
Feed Forked Connection
Hinge Screw
M II Nut
Roller with 1085e II Screw Stud
Feed Lifting Rock Shaft
2810 with 2509 ...
Crank with 157j and 1813 ft Clamping Screw
No. Plate 2047 55 2046 — 2048 2490 2049 2487 465c 1384 307c 1384
1513j 1385
PARTS FOR No. loK28 MACHINE
Feed Rock Shaft
2047 with 2048 ...
Crank with 465c M Pin ti Set Screw Screw Centre (2)
II II Nut (2) 25527 1382 Guide...
51224d 2115 n Thumb Screw
80054 .55 Needle Bar {for round shank needles) 2050 55 ' II i> ( " flat shank needles)
NOTE.—No. 80054 is sent with this machine unless otherwise specified on order.
79
15248 60 Needle BarConnecting Link with 51002e ...
15374 — II II „ II 15248 with 2052
51002e 1384 M ' II M II Adjusting Screw
570c 2115 n ft 11 II Hinge Screw ...
1520r 1385 11 II II n Nut
2052 2490 II ri 11 Stud with 155c
156c 1383 II n ir II Set Screw
8338 — II n Thread Eyelet for 2050 ... '
25 If 1383 M n 11 II Screw for 8338 ...
80056 59 11 M 11 II for 80056
240f 218 M rr II Screw ...
80042 Needle Clamp ...
80056 1378 n 11 80042, with 196f, 240f and 80055, for 80054 ...
196f 1383 11 11 Screw
2054 1378 Needle Clamp with 552r for 2050
552r 1384 Thumbscrew
80 PARTS FOR No. 15K28 MACHINE
No. I'lalf '
2510 55 Oscillating Shaft
•15163 TT II Crank
•15164 — IT Tt II 15163 with 462c, 1519eand 15171 ...
15426 — tt tl
15165 2105 If II „ 15426 with 1519e, 15171 and two462c
2049 2487 11 N II Pin
462c 1384 It ri 11 Set Screw
15170 2105 tl II M Slide Block
226d 2115 tl 11 M M 11 Cap Screw
12424 2105 11 11 M 11 11 11 11 Washer
1035c 2115 11 M M II 11 Screw Stud
1d19c 1385 11 tl II M II II II Nut
15171 2105 II II „ 1. 11 15170 %\uth 220d, 1035c
and 12424
15257 55 Presser Bar
80269 2487 II Lifter
15486 2107 II M rlinge Stud
448c 1384 It M II II Set Screw ...
80011 1378 11 Spring
80057 60 II II Bracket with 453c and 766c
453c 1384 rr II II Set Screw
756c 2115 Tl M II Thread Controller Clamp Screw ...
2070 59 II ft Washer
80058 1375 Presser Foot for 80113 ...
2183 1375 II II II 15226 and 80114 80059 1375
00 c
190f 1383 M 11 Screw
KOTE.—No. 21S3 /.« sent with this machine unless otherwise specified on order.
1384 Pressure Regulating Thumb Screw
2018 15140 2973
23 23 23
Shuttle Bobbin
Case Latch II Lever
Xo.
2515 591f 15278 125018
2542 2441 2049 4B2c
Plate 23 23 23
PARTS FOR No. 15K28 MACHIXE
Shuttle Body ...
II Tension Regulating Screw II II Spring ...
Shuttle, 1 jj-" diam., complete, Nos. 2515, 2618 and 15277
— Shuttle Driver
23 M
2487 1384
2542 with two 462c Pin
Set Screw
81
2531 2532 2533
64 8j
2530 15437 2535 662d 2528 80171 80183
23 Shuttle Race Back ... ... ...
23 II II IT Po.sition Pin ...
23 II II II Spring
1384 II II II II Screw
23 Shuttle Race Body
— ,1 II If 2530 with 2535. two each 662d and 2532 ..
23 II II Cap
1384 II II II Screw
—• Shuttle Race, complete, Nos. 648j, 2531, 2533 and 15437
~ Shuttle Race Body (steel)
- II II Ti ( 11 ), 80171, with 2535, two each 662d
and 2532
80170 — Shuttle Race (steel), complete, Nos. 648j, 2531, 2533 and 80183 NOTE.—No. 252S is senl with this machine unless otherwise
specified on order.
145d 1383 Shuttle Race Screw (2)
15188 — Shuttle Race Slide
15147 5!) II 11 II 15188 with 2824 and two 51282j
2824 5!) „ M Spring
51282j 2115 II II M II Screw
2102 1378 Tension Disc ...
oo
«
82 PARTS FOR No. I5K28 MACHINE
No. Plate
2112 2105 Thread Retainer Guide Disc with 2113 ...
2113 2487 „ II 11 Steady Pin...
460c 2115 „ ,r II Set Screw
2114 2105 II ,1 „ Spring ...
2115 2105 II 11 II Stud
2111 2105 Thread Retainer Guide, complete, Nos. 2112, 2114 and 2116
15275 60 Thread Take-up Cam (steel) with 1293c ...
15433 II It II '15273 with 570c and 1520r
1233c 1384 „ II II Timing Screw
15491 2107 Thread Take-up Lever with 1822
15492 r. II 11 15491 with 50527c
50527c 2115 „ II 11 Hinge Screw
1822 1385 „ ,1 II Roller and Stud ...
80259 1378 Thread Take-up Spring (closed eye)
15010 1378 II 11 II (open eye)
15227 1374 Throat Plate for 15226 ...
80119 1366 „ „ II 80113 ... ... ... • . ...
2897 1366 1, „ ,1 80114 ...
80120 1366 II II II 80115 ... ...
6911 1384 II II Screw (2) ...
NOTE.—No. 15227 is sent with this machine unless otherwise, specified on order.
15404 Trade Mark
15405 — II 11 Rivet
80312 Drip Pan
83
No. 15K30 MACHINE
Wheel Feed. C.B. SHUTTLE. Roller Presser. For Light Leather Work.
This Machine is the same as No. 15K28 with the following exceptions
No, Plate
80243 — Bed ...
22(51 2487 Feed Eccentric with 448c in place of 2038 ...
448c 1384 „ 11 Set Screw
2664 _ Feed Wheel (fine teeth) ...
2258 2104 ,1 M (medium teeth)
15022 — II II (coarse teeth)
NOTE.—No. 2258 is sent with this machine unless otherwise specified on order.
800H4 2104 Feed Wheel Driver, complete, Nos. 2260, 80097, two each 80095
and 80096
8005)7 2487 „ „ II Bushing
80095 2487 1, ,1 Collar
80096 2487 „ „ ,1 Rivet ...
2259 2487 II „ 1, Link
324d 1384 ,, II „ M Screw ... ... •••
80098 2487 ,1 „ II Spring
2206 2487 „ II 11 II Hook ... ... ...
151c 1383 II It II II Screw ...
80124 2104 Feed Wheel Frame with 453c
80174 Feed Wheel Frame, complete, Nos. 151c, 152f, I64f, 240d, 2252
84 PARTS FOR No. 15K30 MACHINE
So.
22.54 2487 Feed Wheel Retaining Clutch ...
225.5 69 II II It II Cap
20of 1383 II II 11 11 It Screw ...
80099 2487 II II II II Spring
240d 218 II II II II II Screw
80521 2107 Needle Bar Thread Eyelet
80520 2111 Needle Clamp 80042 with 196f, 2401 and 80521
80011 1378 Presser Bar Spring 80100 69 Presser Foot ...
S-OTE.—No. 80100 is only supplied with this machine when ordered and at an extra charge.
1867 — Roller, coarse, with 388d and 1.550],for 80298 1843 1381 II fine, II 388d 1, 1550], rr 80299 1.868 — II J", coar.se. 11 632d II 1528], ,1 80300 1842 1381 n l", fine. II 386d „ 1.528], II 80301 1839 1381 11 li"", coarse. r. 38Gd .1 1528], II 80302 1869 — ir fine. II 386d II 1528], II 80303
1381 1381 1381 1384 1383 1381 1384 1385 1381
1381
Arm for 80298 and 80299 . ,1 ,1 80300 M 80301 .
„ 80302 „ 80303 .
IP Adjusting Screw
ti IP pp Nut ,
ti Bracket
11 PI Screw Centre 2202
2203 2204 440f
ir>47j
80207 3lt5f
ir)47j
80106 .?S50f 82462
80208 —
80200 —
Lock Spring ...
II II Screw Nut
II II II II II Washer
Roller Presser, (coarse roller), complete, Nos. SSoOf, 440f.
1867, 2202, 80106, 80297, 82462, two 316f and three 1547] ...
Roller Presser, (fine roller), complete, Nos. SSoOf, 4401'.
1843, 2202, 80106, 80297 82462, two 316f and three 1.547] ...
PARTS FOR No. 15K30 MACHINE 85
No. Plate
80303 — Roller Presser, 1^^' (fine roller), complete, Nos. 5SoOf. 440f, 1869, 2204, 80106, 80297, 82462, two 316£and three 1547j...
NOTE.—No. 80303 is sent ivith this machine unless otherwise specified on order.
I90d 1383 388d 1384 652d 1384 386d 1384
1550] 1385
1528j 1385 2614 2111 907d 1384 2547 1377 2548 2111 2546 — .
Roller Presser Screw ...
Screw for 1843 and 1867 II n 1868
M u 1839, 1842 and 1869 II Nut for 1843 and 1867
I, 1, I, 1839, 1842, 1868 and 1869
Shuttle Race Back
II II M Spring Screw ...
,1 Bt.cly
II II Cap
Shuttle Race, complete, Nos. 907d, 2533, 2547, 2548, 2614, two
each 662d and 2532 ...
80176 — Shuttle Race Body (steel)
80184 — II II II ( II ), 80176, with 2535, two each 662d and
2532
80172 — Shuttle Race (steel), complete, Nos. 907d' 2531, 2533 and 80184
NOTE.—No. 2546 is sent with this machine unless otherwise specified on order.
80101 69 Throat Plate for sizes 9 to 14 needles, for 2258, 2664 and 15022 80102 69 M II It It 16 M 18 n n 2258, 2664 u 16022 80103 69 M II 11 M 19 II 22 n m 2258, 2664 m 15022
80104 69 II M ,1 II 23 „ 25 „ 2258, 2664 „ 15022
NOTE.—No. 80102 is sent with this machine unless otherwise specified on order.
86
PARTS COMPLETE
FOR
No. 15K62 MACHINE
Drop Feed from Left to Right. C.B. SHUTTLE. With Base and
Knee Lifter. For Shirt and Collar Work.
So. Plate
*125022 — 125023 — 2002 2487 4389 2487 138e 1383
Arm ...
„ 125022 with 435c, 15404, 15498 and two 15406 ,1 Dowel Pin
II II 11 (2) (for repairs only) II Screw (3) ...
125024 2112 Arm Shaft
15498 2107 II 11 Bushing
43.5c 1384 II t!
144c 1383 II
8300 59 51224d 2115
II II Screw
Arm Side Cover
Set Screw
Thumb Screw
2007 2107 Arm Spool Pin
2134 1362 Balance Wheel (21' pulley, heavy rim) with t\vo 448c II II ) for stop motion
80002 — 448c 1384
I- itr "
Set Screw
'15038
NOTE.—No. 2134 is sent with this machine unless otherwise specified on order.
— Bed ...
80044 1302 Belt Cover
180d 72 II Screw
Plate 65
1383 1384 1385
1362 1383
PARTS FOR Ko. 15K62 MACHINE 87
No.
2811
•2812 InSe 37oc 1518e
ir,il9 1901 80179
Crank Connecting Rod with 2812 and two 158e
II M II Cap ... ...
II II M II Screw ...
II II II Hinge Screw
II II ti II II Nut ...
Face Plate If II Screw
Face Plate, complete, Nos, 102d, 448c, 460c, 2105, 2127, 15049. 15119, 80211, 82358 and two 233d
Feed Bar
II II Screw Centre (2) ,1 Nut (2)
2111, 2124,
1.507o 315c
J519j
125032 443c
15042 15024 15089 15004 15144 15206 208e
2042 378c 1520r 1832 I085e
1364 1384 1385
59 2115
1373 1373 1373 1374 1373 1374 1383
NOTE.
1384 1385 1385 2115
Feed Cam with 443c 11 IT Set Screw
Feed Dog for shirt work (bevelled for hemmer)
II II II 11
II II II 11 II •• • > ^
II II II collars and cuffs
II II {spiked teeth), for collars and cuffs II II for general work
II 11 Screw ' ... ... • ...
-No. 15042 is sent with this machine unless otherwise specified on order.
Feed Forked Connection
Hinge Screw
II II Nut Roller with 1085e II Screw Stud
PARTS FOR No. loK62 MACHINE
No. PUle
2047 55 Feed Rock Shaft
2046 — 11 11 II 2047 with 2048 ...
2048 2490 II 11 M Crank with 465c
2049 2487 II tl .1 II Pin
465c 1384 It 11 II M Set Screw 307c 1384 11 It ri Screw Centre (2)
1513] I3S5 11 ir II 11 II Nut (2) ...
26347 1364 Guide (combination)
26221 1364 M (double faced) 284d 1383 11 Thumb Screw 3140 59 IT Washer ...
80054 55 Needle Bar
15248 00 11 II Connecting Link with 51002e ...
15374 — II Tl ,1 „ 15248 with 2052
51002e 1384 11 It II II -Adjusting Screw
570c 2115 >1 • ri 11 It Hinge Screw ...
I520r- 1385 M 11 II tl M II Nut
2052 2490 tl II It Stud with 155c
]55c 1383 11 II 11 11 Set Screw
290e 1383 II 11 Screw Bushing (2)
80055 59 M 11 Thread Eyelet
240f 218 II II It II Screw ...
80042 — Needle Clamp ...
80050 1378 ,1 80042 with lOGf, 240f and 80055, for 80054
lOOf 1383 II II Screw
15028 1304 Oscillating Rock Shaft with 4784
3052 1513j
035c
1513j
4784
2510
*15163 2490 1385 2115 1385 2490
Oscillating Shaft
Hinge Pin
.. II Nut ...
•I II Screw Bearing
II 11 II
OaPad ...
Nut
Crank
PARTS FOR No. 15K(>2 MACHINE
No. Plate
I5I9e l38o Oscillating Shaft Crank Slide Block Screw Stud Nut
15171 2105 ,> n 15170 with 226d, 1035c
and 12424 15257 55 Presser Bar
2062 2487 „ Lifter
36c 1383 ti II II Screw
15122 1377 II II Lifting Bracket with 453c 15123 1377 II II ti II Guide Plate ...
178c 1383 II II II ti II It Screw
453c 1384 II II II II Set Screw
290e 1383 n n Screw Bushing
80011 1378 „ II Spring
2070 59 II II II Washer
1375 Presser Foot for 15024 and 15042 2184
1.5090 15209 2999 25975 25976 25977 22Sd 25973
228d 190f
1375 1375 GO GO
GO 1383
60 1383 1383
II 15089 ...
II 15206 ...
with 228d, for .strip gauge, for 15004 and 16144 E.xtension, (or 2999
r , II 2999 11 J", 11 2999 ...
M Screw ... ... . ...
Strip Gauge for 2999
II II Screw ...
Screw
NOTE.—No. 2184 is sent with this machine unless otherwise specified on order.
263j 1.384 Pressure Regulating Thumb Screw
2518 23 Shuttle Bobbin
16091 1380 , 11 11 Case Latch
16027 1380 If 11 M 11 Lever
90 PARTS FOR No. 15K62 MACHINE
Plate No.
15126 — Shuttle, 1^1^" diain., complete, Nos. 2518, 7085 and 15148
15044 1380 Shuttle Driver...
15096 — 2049 2487
462c 1384
15044 with two 462c Pin
Set Screw
15032 1380 Shuttle Race Back
2532 23 II " II Position Pin ...
2533 23 II .1 II Spring
648j 1384 II II II II Screw...
15031 1380 II II Body
15030 — Shuttle Race, complete, Nos. 648], 2533, 15031, 15032 and two
2532
]45cl 1383 Shuttle Race Screw (2) Shuttle Race Slide
,t II ir 15188 with 2824 and two 51282j
„ II II Spring
II II II II Screw ...
Tension Disc ...
II Regulating Thumb Nut ...
II Releaser with 15074 II II Screw ...
II Screw Stud
M 11 M 600f with 1580d II II II Set Screw II Spring
II Thread Guard ...
Tension, complete, Nos. 2103, 16202 and two 2102 Thread Eyelet ...
II Guard ...
233d 1383 II II Screw
Thread Retainer Guide Disc with 2113 .
II It II M Steady Pin.
460c 2115 n II M Set Screw
2114 2105 ir II II Spring ...
15188 15147 2824 51282]
2102 I560d 15049
102d
*600f 16202
448c 2103 2105 80211 15074 82358
2112 2113
5!) 5!) 2115 1378 13S5 1378 1383 1384
1384 1378 2487
59
2105 2487
PARTS FOR No. 15K(>2 MACHINE 91
Thread Take-up Spring
No. Plate 2124 1378 2127 1378 233d 1383
Regulating Plate
Adjusting Screw
J5047 — Throat Plate, large needle hole, for 15042 ..
15048 1373 rt 11 small rt 1 If 15042 ..
15005 — ri n large II 1 H 16004 ..
15040 1374 rr n small It I 11 1S004 ..
15091 — 11 11 large M 1 ti 15089 ..
15092 1373 11 II small II 1 11 15089 ..
15207 — ri rf large II 1 11 15206 ..
15208 1374 11 II small II 1 K 15200 ..
15145 1373 H for 15144 ...
15025 1373 rt ir (.065 thick) small needle hole,
6911 1384 11 11 Screw
KOTE.
W
—No. 15048 is se72t with this machine uyiless oi
H5404 15405
specified on order.
— Trade Mark Rivet
80313 — Drip Pan (for Machine without Iron Base) 2978 1380 II It ( II II with Iron Base)
for 15024
92
PARTS COMPLETE
FOR
No. 15K95 MACHINE
Reversible Drop Feed ; C.B. Shuttle ; For Stitching or Joining Tape Belts on Spinning and Twisting Frames.
Arm
8034^0 with 435c. 448c, 15404, 15480, 15498 and two 15405 Dowel Pin (2)
M M (2) (for repairs only) Screw (3) ...
Arm Shaft
Bushing ti II Screw
Arm Side Cover
Arm Spool Pin
Set Screw
Thumb Screw
Balance Wheel (21" pulley, heavy rim) with two 448c
„ II Set Screw
— Bed
No. I'latc
*80340 — 80341 —
2002 2487 4389 2487^
I38e
1383'
15497 2104 15498 2107 435c 1384 144c 1383 8300 59 51224d 2115
2007 2107
15282p 1152 448c 1384
♦80342 — 250b 1383 248a 1383 2020 1377
*15312 — 15313 2107
2022 75 462c 1384 15314 —
2811 55
Clamp Stop Motion Clamp Screw II Stop Screw ...
II Washer
Flanged Bushing
II 11 15312 with two 402c
II II Pin
II II Set Screw
— Clamp Stop Motion, complete, Nos. 248a, 256b, 2020 and 15313 Crank Connecting Rod with 2812 and two 158e
No.
2835 315c lolOj
Plate 792 1384 1385 125032 59
443c 2115 1374 1383 2106
1383 1384 1385 2107
2115
2400 1383 1385 1384 1385
PARTS FOR No. 15K95 MACHINE
Feed Bar
Screw Centre (2) II II Nut (2)
Feed Cam with 443c II Set Screw Feed Dog
11 M Screw
Feed Forked Connection with 175]
125262 with 125335 .Acljii.sting Screw Hinge Screw
" II Nut Slide Block
r> II 125047 with II II Screw Stud
1085e
.Peed Lifting Rock Shaft
2816 with 2509 ...
Crank with 157j and 1813 M Clamping Screw 11 Roller and Stud Screw Centre (2)
.. Nut (2)
15220 208e 125262 125340
175j
378c 1520r 125047 125335 l()85e 2816 2836 2509 157j 1813
307c
1513j
125397 125398 50353e
8217 45305 125381
15.50j
125270 307c
I5l3j
2107 Feed Regulator
1384 59 2058
1385 2106 1384 1385
125397 with 125381 Hinge Screw
II II Friction Washer
Feed Reversing Handle
45305 with 1550j ...
Lock Nut Feed Rock Shaft
Screw Centre (2) It II Nut (2)
93
94 PARTS FOR Xo. 15K95 MACHINE Nn i'l.tU-
80042 — Needle Clamp ...
80056 1378 n i- 80042, with 1961, 240f and 80055. for 80054 . ..
196{ 1383 11 II Screw
4304 2490 Oscillating Rock Shaft {steel, hardened) with 4784 ...
Hinge Pin 3052 2490
I513j 1385 035c 211.5 1513j 1385 4784 2490
Nut ...
Screw Bearing ...
II II Nut
Oil Pad ...
2510 55 Oscillating Shaft . . . -
•15163 — II II Crank
*15104 — tT 11 II 15163 with 462c, 1619eand 15171 ...
15426 — ri II II
15165 2105 M 11 II 15426 with 1519e. 15171 and two 462c
2049 2487 ir 11 It Pin
462c 1384 ir M 11 Set Screw
15170 2105 II 11 •1 Slide Block
226d 2115 ri t l II II II Cap Screw
12424 2105 II 11 II II II II II Washer ...
1035c 2115 11 f| II II II Screw Stud
1519e 1385 11 IT II It 11 II II Nut
15171 2105 11 11 II II ir 15170 with 22Cd. 1035c
and 12424 15257 55 Presser Bar
80269 2487 „ II Lifter
15486 2107 M II II Hinge Stud ... ... ... ... '
448c 1384 II . 11 11 11 11 Set Screw ...
aooii 1378 It rr Spring
80057 60 II 11 II Bracket with 4.53c and 756c
453c 1384 11 11 II 11 Set Screw
756c 2115 II II II 11 Thread Controller Clamp Screw ...
2070 59 11 II II Washer
2183 1375 Presser Foot for 15226 ...
190f 1383 11 11 Screw
No 15U1
Plate
15277 23 2515 23 591f 23 15278 23 125018 —
2542 2441 23 2049 2487
4(52c 1384 2531 23 2532 23 2533 23
048] 1384 2530 23 15437 —
2533 23 062d 1384 2528 —
80171 80183 —
80170 —
x o :
145d 1383
15188
PARTS FOR No. 15K95 MACHINE 95
Shuttle Bobbin Case Hinge, complete, Nos. 2973, 2974, and
15140 Shuttle Bobbin Case with 591f, 592e, 2975, 15141 and 15278
Shuttle Body ...
II Tension Regulating Screw II II Spring ...
Shuttle, 1 jj" diam., complete, Nos. 2515, 2518 and 15277
Shuttle Driver ...
II II 2542 with two 462c Pin
n II Set Screw Shuttle Race Back
Position Pin ...
Spring
11 Screw...
Shuttle Race Body
2530 with 2535, two each 662d and 2532 . Cap
11 II II Screw
Shuttle Race, complete, Nos. 648j, 2531, 2533'hnd 15437 Shuttle Race Body (steel)
11 ti II ( ti ), 80171, with 2535, two each 662d
and 253
Shuttle Race (steel), complete, Nos. 648j, 2531, 2333 and 80183
—Xo. 252S is senl with this machine unless otherwise specified on order.
Shuttle Race Screw (2)
Shuttle Race Slide
96
No.
2102 80081
I'lale 1378 2-187 1560d 1385 OOOf 138-1 10202 —
448c 1384 2103 80211
1378
80085 00
82358 59 233d 1383
2112 2113
2105 2487 400c 2115 2114 2105 2115 2111
15275 15433 —
1293c 1384
15491 2107 15492 — 50527c 2115
1822 1385
80259 15010
2105 2105
00
1378 1378
15227 1374 0911 1384
•15404 —
15405 —
PARTS FOR No. 15K95 MACHINE
Tension Disc ...
>t Release Pin
Regulating Thumb Nut ...
Screw Stud
„ M OOOi with loOOd .. tt Set Screw
Spring
Tension, complete. Nos. 2103, 16202 and two 2102
Thread Controller
Thread Guard ...
M II Screw ...
Thread Retainer Guide Disc with 2113 II Steady Pin .
Set Screw Spring ...
Stud
Thread Retainer Guide, complete, Nos. 2112, 2114 Thread Take-up Cam (steel) with 1293c ..
„ II II 15275 with 570c and 1520r
I, II II Timing Screw
Thread Take-up Lever with 1822
„ II II 15491 with 50527c
„ ,1 ,1 Hinge Screw
II ,1 II Roller and Stud ..
Thread Take-up Spring (closed eye)
II „ 11 (open eye)
Throat Plate for 15226 ...
II II Screw (2) ...
Trade Mark ...
II II Rivet
nd 2115
No. Plate 96922 —
96923 — 124387 124.388 124389 50403
7.32b 1384 124390 2111 124411 —
22436
96924 8410
1518j
2807 2107 2107
2107
2107
1385 2107
8417 2111
28242 2107
iM)925 — 85242 — i)692G — 96927 — 96928 — .S-.V153C 2115
97
Truck
For 15K95 Machine.
Machine Base (wood) with 124389, two each 8417, 28242 and
' nails No. 18 R.H
It Bracket with four Wood Screws f No. 12 Button
II 124387 with 56493
124388 with 22436 and 124411 II Cushion
II Thumb Screw
It II II Bushing
I, I, ri ,1 124390 with 732b
II II II Washer
Machine Cover (rexine) 11 Hinge ...
1, n Bolt Nut...
ti II It II Washer ...
Machine Hinge, complete, Nos. 1518j, 2807 and 8416 Machine Re.st Cushion (leather)
•„ M Nail No. IS R.H. ...
Stool Ba.se with S515.3c and four Wood Screws 1^" No. 12
Seat
•I 85242 with 96929 and three Wood Screws IJ' No. 14
II Bracket
II 11 Spindle
M II II Set Screw
96929 — Stool Seat Bracket and Spindle, complete, Nos. 96927 and 96928 96930 — Truck Axle with two 80733
Accessories
No. Plate
2.518 23 Bobbins {5) 30509 1382 Oiler ...
25537 1382 Screw Driver (Machine) ...
120378 1382 n (Shuttle Tension)
S0IO7 1381 Wrench for 80208 to 80303, for 1.5K30 Machine
99
100
No. I'latc 221808 2109 350094d 2110 3I6c 2110 1700c 2110 512240 —
80329 2109 221806 2109 350093c 2110 208d 1383 79d 1383 .V.VlOd 2110 200681c 2110 80330 2110 80331 2110 221807 2109 80332 2109
402f — 80333 2110 80.331 2110 iV.VlOd 2110 80334 — •
80335 211(1 80058 1375 80336 2110
Attachments
ADJUSTABLE BELT GUIDE
For 15K95 Machine.
Only supplied when specified on order.
Adjustable Belt Guide Adjusting Lever with ol224d ...
II II Hinge Screw II II Position Screw
II II II II Nut
II II Thumb Screw back) with 3500030 and two 80331
II ) .Adjusting Slide with 200G81c II ) II II Position Screw 11 ) II II Screw ...
II ) Screw II ) 11 Nut II ) II Stud II ) Sliding Block II ) Stud (front)
Base Plate ...
II II Screw Lever Bolster with 80331
II II Stud ...
II II II Nut
.Adju.stable Belt Guide Attachment only, complete. Nos. 79d 3i6c. 1700c. 80329, 80330, 80332, 80333, 221806 to 221808 S.'iOOO-id, two each 208d, 402f and three iViVI9d ...
Feed Dog Presser Foot Shuttle Race Slide
101
Binders
When ordering Binders send sample of the Binding and the material to be bound.
BINDER, I" (Swing), for Bedding and Mattress Work,
for 15K28 Machine
No. Plate
85365 2413 Base ...
85366 — II Hinge Pin 85367 2413 " Spring
207d 2412 M II Screw
85325 81 11 ti II Washer
85368 — II Tape Tension Pin 85363 2413 Folder and Bracket 85364 2413 Folder Tape Guide
207d 2412 Screw
85362 2413 Folder, complete, Nos. 85325, 85363 to 8536'
85368 85454 2412 Feed Dog
85328 — Presser Foot Bracket
85320 — II II II Hinge Pin ...
85449 — II II Sole
85370 2413 Presser Foot (hinged), complete, Nos. 85328,
85455 2413 Throat Plate
85456 2413 Binder, complete, Nos. 176d, 85326, 85362
85455 176d 81 Binder Screw
85325 81 II II Washer
two 207d and s
85329 and 85449
85370, 85454 a
10-2
Xo, 8/)580 85576 207d 85325 85577 85324 85323 85340 85339 207d 85325 85581 85582
ATTACHMENTS
BINDER, for Cloth, for 15K28 Machine
I'hte 2412
2412 81 2412
2410 2412 81 2412 2412
Feed Dog
Folder...
II Screw M II Washer Presser Foot
Tape Tension Pin (bent) ...
t. II II (straight)
11 II Plate
Tape Ten.sion, complete, Nos. 8532-1
II II Screw
II II II Washer
Throat Plate ... ... •
Binder, complete. Nos. 85339, 85576, 85577, 85580, 85581, two
each 207d and 85325
85340 and four 85323
BINDER for Cap Peak Work, for 15K28 Machine
Xo. I'liitc
85457 81 Feed Dog 85459 — Folder Base
85460 — II (top)
207d 2412 II ( " ) Binding Screw
85461 — 11 (bottom)
SS50d — II ( II ) Binding Scr.ew 176d 81 II Screw (to fasten to machine
85325 81 .1 .1 Washer
85462 — II Roller Guide, complete, Nos
85463 — II II II Bracket
_ „ „ „ Holler
701d, 85463 and 85464