MACHINE No. 175-51

Form 18918 Aoox7bt, 1935

PRUflBD IK IT. S.

L I S T

OF

PARTS

MACHINE No. 175-51

THE SINGER MANUFACTURING COMPANY

From the library of: Superior Sewing Machine & Supply LLC

iNSTE?uc?riaNS Fce oiklng THE MACHINES aiOUID BE OILED CNCE DAILY

Rarove trhe two knurled thumb nirts and remove the large UTD side cover from the front side of the machine.

Apply oil at all oil holes and at all poiirte vdiere parts are in movable contact at the top as well as Inside the am.

Replace the large am side cover and ti^ten the two

thunh nuts.

Lay the machine on its rear side and apply oil to all

oiling points in the machine bed.

Tuna down the hinged cover beneath the looper ard ap

ply oil to the cam on the looper shaft, then close the Hinged cover.

Use only Singer "Manufacturing Sewing Mar.hi na oil (Cloth and Leather)" for general use, or "Manufacturing Sewing Machine Oil (Stainless for mte Goods)" where a

stainless oil is desired.

Copyright, U. S. A., 1935, by The Singer Manufacturing Co.

All Rights Reserved for alt Countries

INDEX

Page

Accessories 16

Belt and Pulley Guard 17

Machine Base 16

Machine No. 175-51 7

Starting Lever and Foot Lifter Parts 17

Table Belt Guide 17

Thread Itawinder 18

INSTRUCTIONS FOR ORDERING

In ordering from Oils list, use ONLY the part NUMBER In

the FIRST column.

The number stamped on a Sewing Machine Part is in every case the number of the single part only.

Every combination of parts sent out as sucSi has its spe cific number, which, although not stamped on the parts, must be used when ordering the combination.

Each number always indicates the-SAUE PART in whatever list it appears, or for whatever machine.

The letters after some of the numbers indicate the style of finish only, as follows;

A-Hardened, Polished, Nickel Plated and Buffed B-Pollshed, Nickel Plated and Buffed

C-Hardened Only D-Polished Only E-Soft, Not Polished F-Hardened and Polished H-Blued

J-Nlckel Plated Only K-Hardened and Nickel Plated L-Brass Plated

M-Oxidlzed N-Japanned, Dull P-Japanned, Bright R-Merlized

T-Copper Plated

T,A-Hardened, Polished, Copper and Nickel Plated and Buffed T.B-Copper and Nickel Plated and Polished

T.J-Copper and Nickel Plated Only T.K-Hardened, Copper and Nickel Plated T.M-Copper Plated and Oxidized

T.L-Copper and Brass Plated U-Zinc Plated

V-Silver Plated

1-Pollshed and Nickel Plated Y-Black Nickel Plated Only 2-Chromium Plated

Z.B-Pollshed, Nickel Plated, Buffed and Chromium Plated Z.J-Nickel and Chromium Plated

These letters MUST BE USED when they appear in the list;

and AFTER the number as in the l i s t . In t h i s series:

1 to 1500, 50001 to 51500 and 140001 to 142000 are Screw Numbers

1601 to 1800 and 51501 to 51800 are Nut Numbers 1801 to 2000 and 51801 to 52000 are Roller Num bers

. 2001 to 50000 and 5200L to 140001 and 142000 to 190000 are Sewing Machine Parts, 190001 and upward are numbers of Electrical Parts

The figures in the second column refer only to the plates. Illustrating the parts, and are NOT TO BE USED in

LIST OF PARTS Ca.lPLETE PGR

B

I.'A^CHINE NO. 1 7 5 - 5 1

FOR TUFTING IMTTRESSES, SEZ-ING "BUDS" Oti UNDEff/ffiAH AND BULKY I/AJERIAL. PCS? PUTTING A GROUP OF SIITCKiS IN MAT TRESS '.VALIS, ETC. A SPECIALIZED OPERATION. MAKES NINE TACK ING STITCHES. HAS NEEDLE BAH VIBRATION ONLY. LEl<IGrH OF NEEDLE BAR STROKE 1-7/8". HAS A SPECIAL CLAR^P. THIS MA- CHINI IS FITTED VITH A THREAD BREAKER OR CLAI.T, AKD AUTWAT- IC Al© CCN3TAM TEK3ICN3; AISO THREAD POSITICNING FINGER.

THE THREAD IS BROKEN AT THE Ca.lPLSTION OF AN OPERATION BY RAISING THE BUTICN CLW.!P. SPEED 1000 R.P.M..

No. Plate Name

•175001 Arm with 15404 and two 15405 175002 21983 " Dowel Fin

•175003 " Rock Shaft

175340 21990 175003 with 175007 and 175341 175005 21989 Crank (back) with 1177E,152U

and 14C0ieE

1177E 21989 Arm Rock Shaft Crank (back) ClaniJing Screw.

1400ieE 21989 " " " " Position Screw.

15211 21989 ^{" 11 •! It 11 II II}

Lock Nut

•175341 Aito Hock Shaft Crank (front)

175007 21988 Pin

140017E 21988

" Screw (long)

No. Plate 670E 21988 175008 21988 230J 21988 175009 ^{- - - - -} 175010 21990 175011 21990 51649E 21988 5165CB 21988

•175012

175013 21990 175014 21988 175015 21988 175016 21988 175017 21988 175361 21992 175019 21988 140018W 21989 175020 21990 140019W 21988 175486 21992 175487 21991 140072C 21989 175032 21988 175488 21990 175363 21996 140072C 21989 175032 21988 175034 21990 175035 21990 1607 21988 175036 21990

175037

175038

175039

175041 1259C 175042

19CK

•175489 175190

19CK . 1907 175043

21998 21993 21990 21993 21991 22002

21993 21993 21996

PARTS FCR MACHINE 175-51

Name

Arm Screw (^ort)

" Side Cover (left)..

Screw.

" (rigit)

" " " " Screw Stud (long)..

" (short).

" Lock Nut

Thunb Nut Bed

" End Cover (bottom)

" " " " Hinge Pin (left)...

(ri^t)..

" Spring

" " " , " " Hook

" Top Cover (back) with two 175019

" " " " Oil Tube

" " " " Screw (front)

" Screw Clang) (lower)

" Hinge Bracket

" Screw

" " Washer

(upper) with 175489 and two 175190..

" Hinge Bracket

" Screw

" " Washer Hinge Pin

" " Bracket

" " " Screw

Shim (.003 in.

thick)

Clanp Hinge Pin Bracket Shim ( .C05 in.

thick)

Clanp Hinge Pin Bracket Shim (..007 in.

thick)

Clamp Hinge Pin Bracket Shim (.015 in.

thick)

Clanp Liftinc' Aim with 1907,19CK and 12590

" Set Screw

" Chain, 4 1/4 in. long

" " Screw (lower)

" Bracket.

II M II II ri

Rivet

Clamp Lifting Chain Screw (upper)

" Lock Screw

" " and Thread Pull-off Holder Shaft

PARTS FCE MACHINE 175-51

No. Plate Name

175044 21988 Clamp Lifting ami Thread Pull-off Holder Shaft Collar with 458C

458C 21993 Clanp Lifting and Thread Pull-off Holder Shaft Collar Set Screw

175045 21996 Clan? Lifting and Thread Pull-off Holder Shaft Spring

175046 21989 Clamp Lifting and Thread Pull-off Holder Shaft Spring Collar with 458C

458C 21993 Clamp Lifting and Thread Pull-off Holder Shaft Spring Collar Set Screw

Clamp Lifting Rod

" Aim with ISGE and 140022E

" " " " Clamping Screw

" " " " Position Screw Stop Plate

" " " " " " Screw....

" " " " " " Wash

er

Clamp Lifting Rod Cotter Pin

" Spring

" Stop Collar with 160C

160C 21988 Clamp Lifting Rod Spring Stop Collar Set

Screw

Clamp Opening Pawl '

" " " Hinge Bracket

Screw

" Screw Stud

" Ratchet

" " " Screw

" Releaser '• " " " Screw

Washer...

" Spring

" Presser Bar

" " " Collar with 458C

" n I. II gg^ Screw

" n n gprew Bearing

" " " Spring

" Pressure Regulating Thumb Screw....

" Lock Nut

Clan? complete, Nos.l40075C,140076J,175363 175486 to 175488,175490 to 175494,three 208J,four 140072C and five 175032 Pace Plate

" " 175060 with 18£J and 175062, 175063,175065 and 202098

12QJ 21989 Pace Plate Screw 175047

175048 16C£:

140022E 175049

16QJ ,175032

42830 175050 175051

175490 175491 208J 140075C 175492

208J 175493 140076J 175032 175494 175052 175053 458C 175527 175055 140023W

17221

175495

175060 175061

21996 21996 21988 21988 21989 21988 21988

22C00 21998 21991

21991 21991 21997 21989 21991 21997 21991 21989 21988 21991 21996 21989 21993 21991 21998 21989 21989

10

No. Plate 175062 22002 18EJ 21993 175063 22002

202098 175065 175066 175085 175086 175087 51183E 175088 175525

175089 175090

435C 175091 175092 458C 175093 175095 175526 140027C 175133 175096 458C 204383

175348 140028C

17221 175099

160E

175100

1492J

175101

175349 168U 516527 175103 175104

22002 22002 21989 21993 21996 21998 21993

21996

21993

21993 21993 22000 21993 21998

21996 220CX)

21993 21993 21996

21994 21993 21989 21993

21988

21993

21993

21993

21994 21989 21989 21988 21994

PARTS PCE MACHINE 175-51

Name

Face Plate Thread Guide (lower) Plate...

" Screw

n t> K H H ^ V

Spacing Collar

Face Plate Thread Guide (lower) Roller....

n t. I. .. ..

" (upper) Looper

Driving Shaft

" " " Bushing

" n t . l i Clanging Screw

" " " Crank with two 435C..

" " 175088 with 175090

Locper Driving Shaft Crank Connecting Link

i( II h II n n

Hinge Stud

LocqDer Driving Shaft Crank Set Screw

" Gear

" Pin

" Set Screw Shaft with 458C

" " Crank with two 140027C

" 175095 i^th 175133

" Set Screw

" Stud Machine Rest Stud

" " " Set Screw

Needle Bar (hollow) with 200125P, 200175D

and 204250

Needle Bar Connecting Link

" Hinge Screw....

" " " Nut

" " - " stud with 16CE

Needle Bar Connecting Link Hinge Stud Clanplng Screw

Needle Bar Connecting Link Hinge Stud Thread Guide Plate

Needle Bar Connecting Link Hinge Stud Thread Guide Plate Screw

Needle Bar Connecting Link Hinge Stud Thread Guide Roller

Needle Bar Connecting Stud (lower)

" " " " " Nut

" " " " Lock Nut

" Washer..

" (upper)

" " " t. >1 jjyt

No. Plate 515521 21989

175103 21988 175105 21994 175106 21994

140029E 21993

140024E 21989

152U 21989

140031C 21993 51653E 21993

175535 21988

175108 21995 175109

175110 21995 134E 21995 175111 21997

175112 21997 175113 21997 175114 21997

175119 21995 140027C 22000 204250 22000 20Q175D 22000 175496 21998 175119 21995 175307 21992 175069 22C02 175515 21992

140026C 21986

175374 21996 175119 21995 175120 2199'x 175121 21994

140032C 21995

PARTS FOR MACHINE 175-51 ₁₁

Name

Needle Bar Connecting Stud (upper) Nut Lock Nut

Needle Bar Connecting Stud (upper) Washer.

" Eccentric v/ith 140027C

" " " Connecting Rod witli 152LJ,140034E,175535 and two 140029E...

Needle Bar Eccentric Connecting Rod Cap Screw

Needle Bar Eccentric Connecting Rod Clanp- ing Screw

Needle Bar Eccentric Connecting Rod Clamp

ing Screw Nut ;...

Needle Bar Eccentric Connecting Rod Hinge Screw

Needle Bar Eccentric Connecting Rod Hinge

Screw Nut

Needle Bar Eccentric Connecting Rod Oil Pad (felt)

Needle Bar Eccentilc Pawl

Needle Bar Eccentric Pawl canplete, Nos.

175108,175110 to 175112 and 175114 Needle Bar Eccentric Pawl Bracket

" '• " " •' Screv/...

" " " " " Steady

Pin

Needle Bar Eccentric Pawl Hinge Pin

" Spring

Stud (large)

Needle Bar Eccentric Pin

" " " Set Screw

" " Thread Guide

" " " " Screw

" " Vibrating Cam

• Pin

" " " " Wonn '• Pin

" WHeel with two 14C026C

Needle Bar Vibrating Cam v/orm Wheel Set Screw.

Needle Bar Vibrating Cam Worm VTheel Shaft.

Pin

" " . " Lever '

" " " Adjusting

Bracket with 18eC,458C and 175124 Needle Bar Vibrating Lever Adjusting

Bracket Hinge Screw

12 PAHTS PCE MAOmffi 175-51

No. Plate Name

458C 21993 Needle Bar Vibrating Lever Adjusting Bracket Hinge Screw Set Screw

175122 21997 Needle Bar Vibrating Lever Adjusting Bracket Hinge Screw Slide

51654C 21995 Needle Bar Vibrating Lever Adjusting

Bracket Lock Nut

175123 21995 Needle Bar Vibrating Lever Adjusting Bracket Lock Nut Screw Stud

186C 21997 Needle Bar Vibrating Lever Adjusting Bracket Lock Nut Screw Stud Set Screw..

175124 21997 Needle Bar Vibrating Lever Adjusting Bracket Lock Nut Screw Stud Set Screw Locking Disc

175125 21995 Needle Bar Vibrating Lever Adjusting Bracket Lock Nut Washer

Needle Bar Vibrating Lever Aim with 51923.

" Hinge Screw

" " " " " Roller am Screw Stud

Needle Bar Vibrating Lever Ann Screw

" " " " Y/aeher

" Hinge Screw....

" Lock Screw

175127 21997 Needle Bar Vibrating Lever Hinge Screw Slide

Needle Guard

" 175116 with 175131 and 17513$

" 175120 with 140036D and 175137

" Cam with two 125X

" " " Set Screw

" Pin

" " Oscillating Crank with 896E

and 175134

896E 21995 Needle Guard Oscillating Crank Clamping Screw

21988 Needle Guard Oscillating Crank Spring 21995 " " " " " Hook

(crank end)

175135 21997 Needle Guard Oscillating Crank Soring Hook (bed end)

Needle Guard Shaft

21993 " " " Bushing

21993 " " " •' set Screw

21988 " " Thread Finger

21988 " Screw

21996 " Plate

21988 " " Screw !!!!.!..!.

22000 " Set Screw

175126 140033C

51923

140024E 175032 140034C 140035C

»175116 175128 175129 175130 1259C 175131 175132

175016 175134

175136 175094 458C 175137 140036D 175483 140019F 200125F

21998 21995 21988

21989 21988 21995 21995

21998

21997 21993 21997 21995

PARTS PGR MACHINE 175-51 _{• 13}

No. Plate Narae

175379 21991 Plug for Feed Plate Regulator SttiaTt Hole..

•175139 Pulley

175140 a999 " 175139 with 175147 140037C 22000 " Engaging Screw

51655J 22000 " " " Nut 175141 22000 " Oil Pad (wick) 175142 21999 " Shaft

175143 21993 " " Gear 175144 22000 " " " Pin 175145 21998 " Shifter

175146 21999 " " Holder with 51649J and 140078C

1400780 22000 Pulley Shifter Holder Set Screw

5164aJ 21988 " " " " Lock Nut..

•175147 " " Ring (V grooved)

117aE 22000 " " Screw

175148 21998 Starting Crank i^th 1747J and 14003^

140039E 21989 " " Adjusting Screw

1747J 21989 " " " " Nut 175149 22000 " " Pin

175150 21998 Stop Dog

175151 21998 " " Cushion Spring

175152 21999 " " " " Holder with 50581C and two 140040C

50581C 22000 Stop Dog Cushion Spring Holder Set Screw..

140040C 22000 " " " " Set Screw 175119 21995 " " Pin

175153 21994 " Motion Retaining Collar

leOJ 21988 " " " " Screw 175154 22000 " " " " " Stud...

882C 22000 " " " " " " Set Screw

175155 21999 Stop Motion Shaft

175156 a998 " " " Spring

175157 a999 " " " " Collar with 140041C

140041C 22000 Stop Motion Shaft Spring Collar Set Screw.

175158 21998 " " Trip

175159 21999 " " " Block with 882C

140042C 22000 " " " " Hinge Screw

51649E 21988 " " " " " "Nut....

175U3 21997 " " " " Spring 175229 22000 " " " Point

160J 21988 " " " Screw 175032 21988 " " » n 175160 22001 Tension (autcmatlc) Disc

175161 22002 " " " Position Pin

1560C 22002 " " Regulating Thumb Nut..

14

No. Plate 175162 a998 140027C 22000

175522 22001 175163 21999 152U 21989

152U 21989

175164 21999 175165 21994

140043C 22001 175166

125314 . 22001 175167 22001 175168

175160 22001 175161 22002 1560C 22002 140044C 22001 175169

13710 22C01 175170 ^{- - - - -}

175171 22001 175172 22001 175173 22001 175174 22002 160J 21988 175175 22002 140045K 22001 175176 21998 140046C 22002 175177 22001 175178

175179 22001 175180 22002

175181 22002 175182 23002

465C 22002

PARIS PC® mCHINE 175-51 Name

Tension (automatic) Releasing Cam with two

14C027C

Tension (automatic) Releaslmg Cam Set

Screw

Tension (automatic) Releasing Disc

Bod

" Adjust ing Nut

Tension (automatic) Releasing Rod Adjust ing Nut Lock Nut

Tension (automatic) Releasing Rod Spring..

" " " " Wearing

Sleeve

Tension (autraatlc) Screw Stud

140043C with 1560C

Tension (automatic) Spring

" Thread Eyelet

Tension (automatic) conplete, Nos. 125314, 175166,175522 and two 175160 '...

Tension (stationary) Disc

" " " Position Pin....

" " Regulating Thumb Nut.

" " Screw Stud

140044C with 1560C

Tension (stationary) Spring

Tension (stationary) C0D?)lete, Nos.13710,

175169 and two 175160

Thread Eyelet (back) (front)

" Nipper Head

Plate

" Screw

" " " Washer

" " Releasing Head Screw

" " " Lever

" " " " Hinge Screw.

" " Rod

" 175177 with 175173

Thread Nipper Releasing Rod Spring (lower)

I, II II "I " II

Washer

Thread Nipper Releasing Rod Spring (upper)

" Collar

with 4650

Thread Nipper Releasing Rod Spring Collar

Set Screw

No. Plate 175183 22001 17221 21989 175184 22002

175185 22002 175161 22002 175186 21998 175187 22002

160C 21968 1120C 22002 175188 21998 175189 22002

175190 23X2 1120C 22X2 175191 23X2

160C a988 175192 23X2 175167 22X1

»15404 15405

PJffiTS FCR MACHINE 175-51 15

Name

Thread Nipper Releaeing Screw Stud

" " Nut....

II 11 II II M II

Washer

Thread Nipper Releasing Stud

" " Thread Guide Pin

" Pull-off (back)

" Holder with lecXJ and 113X

Thread Pull-off (back) Holder Set Screw...

Set Screw

" " (front) '.

Holder with 1120C and 175190

Thread Pull-off (front) Holder Stop Pin...

" " " Set Screw

Stop Collar with 1600 and 175192

Thread Pull-off Stop Collar Set Screw...

" • " Stop Pin

" Thread Eyelet Trade Haii<

" Rivet

Genuine Singer Needles should be used in Singer Machines.

These Needles and their Containers are marked with the

Company's Trade Mark "SIMANCO." l

Needles in Containers marked

"For Singer Machines"

are not Singer made needles. 2

16

ACCESSCRIES

No. Plate Name

175195 22003 Hand Wheel with 4550, for turning ina<ailne hy hand

4550 22004 Hand Wheel Set Screw

120342 22003 Oiler (copper plated) with 120343

120343 22003 " Spout, 3 3/8 in. long

26026 22003 Screw Driver 175196 22003 " Eye

175197 22003 Wrench for 140026 175198 22003 " 140027

No. Plate 175199

175200 22005

1400470 21997

•175201

175115 23004

•175202

175203 22004

•175204

175205 22004 51656J 21997 175206 22004 175207 22004 175536 23004 175425

175208 22004 1400480 22004 175209 22004 175210 22004 175424 23004 1450 22004 1637J 220O4

MACHINE BASE

Name Maciiine Base witti 160C

Machine Base conplete, N08.145C,1637J, 1400470,1400480,175199,175308 to 175210 175424,175425 and four wood screws 7/8

in. No. 14 R.H

Madeline Locating Screw Stud

" Lock Plate

175201 with 175203, 175205 end 175306

Machine Lock Plate Position Stud

" " " " " 175202 with 175304

Machine Lock Plate Position Stud Washer...

" Stud

"• Thiarb Nut

Screw Stid

" " " " Spring

" Washer

Machine Lock cooplete, Nos. 51656J, 175115 175207 and 175536

itechlne Starting Lever

" Hinge Screw

" Spring

" Hook (long).

" (short)

" Stop Screw

" " n n „

17

BELT AND PULLEY GUARD (HINGED)

No. Plate Name

175211 Belt and Pulley Guard

175212 22005 " Hinge

175a3 n t. n „ n

175214 22005 Belt and Pulley Guard caiplete, Nos.l75ai two 175a2, six 175213 and e l ^ t wood screws 3/4 in. No. 9 R.H

No.

175a5

56865 175216 175a7 175218 175219

175a5

56865 175a6 175a7 175218 175a9

STARTING LEVER AND POOT LIPIEH PARTS

Plate Name

Foot Lifter Chain, 37 in. long, with two 56865

a997 Foot Lifter C2ialn Hook 22005 " " Treadle

22004 " " " fflnge Pin 22005 " " " Stand

22005 Foot Lifter Treadle ccmplete, Noe. 175a6 to 175218 and two wood screws 1 in. No.

14 F.H

Starting Lever Chain, 37 in. long, with two 56865

a997 Starting Lever Chain Hook 22005 " " Treadle

22004 " " " Hinge Pin 22005 " " " Stand

22005 Starting Lever Treadle ccmplete. Nob.

175a6 to 175218 and two Wood screws 1 in. No. 14 F.H

No. Plate 175220 22005 175221 22005 140035C a995 175222 22005 175223

175224 22005

TABLE BELT GUIDE Name

Belt Guide (left) with 140035C (ri^t) with 140035C

" Set Screw Pulley

" Shaft

" " 175223 with 1259E and 175227.

18

No. Plate 175225 22005 1259E 21993 175227 22005 1259C 21993 175228 22005

TABLE BELT GUIDE

Name

Pulley ShaJ^t Bracket with 1259C

" " Oil Plug Screw

" Wick

" " Set Screw

Table Belt Guide conplete, Nos.175220, 175221, 175224, 175225 and two eadl 175222 and wood screw® 7/8 in. No. 14 R.H

THREAD UNV/INDER

PCS? ONE SPOOL

No. Plate Name

225259 22006 Spool Rest with 201018C 150203 22006 " " Cushion (felt) 225388 22006 " " Rod

2O0383C 21997 " " " Set Screw

201018C 21997 " " Set Screw 202490 22006 " Stand with 2003830 225391 22006 Thread Guide '

201696J 21997 " " Lock Nut

225324 22006 " Rod y/lth 208E and 225322 208E 21997 " " " Screw

225322 21997 " " " Washer

225260 22C06 Thread Unwinder conplete, Nos.150203,

201696J, 202490,225259,225324,225388, 225391 and three wood screws 7/8 in.

No. 12

27739 22006 Thread Cone (wood) for large cones

225390 22006 " " Holder for inverted cones

Note: Nos. 277.39 and 225390 are used with, hut not

included in 225260.

Genuine Sing:er Needles should be used in Singer Machines.

These Needles and their Containers are marked with the

Company's Trade Mark "SIMANCO." 1

Needles in Containers marked

"For Singer Machines'*

are not Singer made needles.

iLMiiiiiiidiis OF

•FSfr

PLATE 21988-FULL SIZE

140017 PAGE 7

51923 PAGE 12

175008 PAGE 8

51649 PAGE a

PAGE 8

175002 PAGE 7

175007 PACE 7

175014 PAGE 8

175017 PAGE a

51650 PAGE B

140026 PA6E 11

175016 PAGE 8

140022 PAGE 9

175015 PAGE S

175019 PAGE 8

PAGE 9

175535 PAGE II

140019 PAGE 8

175137 230 140036

PAGE 12 PAGE B PAGE 12

175103 PAGE I I

175032 PAGE 8

175044 PAGE 9

PLATE 21989-FXTLL SIZE

175005 PAGE 7

140023 PAGE 9

175049 PAGE 9

40024 PAGE 1 1

140016 1177 140018^

PAGE 7 PAGE 7 PAGE 8

1747 1722 PAGE 7 PAGE 13 PAGE 9

175066 PAGE 10

175046 PAGE 9

120 140039

PAGE 9 PACE 13

140072 140076

PAGE B PAGE 9

PAGE 0

175053 PAGE 9

140075 PAGE 9

51652 PAGE 10

PLATE 21990-ONE-HALF SIZE

175340 FAGE 7

I

175010 PAGE S

175020 PAGE 8

175034 PAGE B

175035 PAGE 8

175036 PAGE 8

175011 PAGE 8

175042 PAGE 8

175013 PAGE 8

175488 PAGE a

PLATE 21991-FTJLL SIZE

175490 PACE 9

175493 PAGE 9

175487 PAGE 8

175494 PAGE 9

175492 PAGE 9

175527 PAGE 9

175491 PAGE 9

175489 PAGE 8

75379 PAGE 13

175051 PAGE 9

fS

PLATE 21992-ONE.HALF SIZE

175515 PAGE 1 I

175496 PAGE I 1

J7536!

175307 PAGE 1 I

175486 PAGE 8

r

PLATE 21993-FULL SIZE

140029 190

PAGE 11 PAGES

T

1492 185

PAGE 10 PAGE to

r r

435 1259 458 175101

PAGE 10 PAGE 8 PACE » PAGE 10

i

Wf

^{11 II •}

175089 140031 51183 140028

PAGE 10 PAGE 1 1 PAGE 10 PAGE 10

175091 PAGE 10

175099 PAGE lU

175100 PAGE iO

75143 PAGE 13

175094 PAGE 2

V

175096 PAGE 10

75085 PACE 10

51653 PAGE n

K PLATE 21994-ONE-HALF SIZE

' " .1 . 1 ,• —

175106 PAGE I t

175104 PAGE }0

175349 PAGE 10

I

1751ZO PAGE 11

175I2I PAGE I I

n

175153 PAGE 13

175348 175165 PAGE 10 PAGE 14

PLATE 2i995-FULL SIZE

175110

PAGE 1 t

140032 PAGE I I

175132 PAGE 12

175123 PAGE 12

175108 PAGE 1 1

U0033 PACE 12

140034

175119 PAGE t t

PAGE 12

175125 PAGE 12

896 PAGE 12

PAGE t t

51654 PAGE 12

140095

PAGE U

175134 PAGE 12

H

PLATE 21996-ONE.HALF SIZE

175374 175043 204383 175047 175052

PAGE n PAGES PAGE 10 PAGES PAGES

175048 PAGE 9

I

75525 PAGE 10

175483 PAGE 12

175086 PAGE 10

175526 PAGE 10

175363 PAGE 8

PLATE ai997-FULL SIZE

I75I30 PAGE 12

'175114

; PAGE 11

175113 PACE 1 I

175122 PAGE 12

175111 PAGE 1 1

8

75 27 PAGE 12

.186 PAGE 12

"^175112 175131 175135 175124 PAGE n PAGE 12 PAGE 12 PAGE 12

PAGE 16

201018 PACE 18

140047 PAGE 16

200363 PAGE 18

S6d65

PAGE (7

225322 PAGE 18

201696 PAGE 18

208 PAGE 18

PLATE 21998—ONE-HALF SIZE

175050 175055 175093 PAGE 9 PAGE 9 PAGE !0

su

5

175 62 PAGE 14

175128 PAGE 12

175151 PAGE t3

175126 PAGE 12

175148 PAGE 13

175087

PAGE10

175156 175150 175158

PAGE 13 PAGE 13 PAGE 13

175188 PAGE IS

C

175186 PAGE 15

175145 PAGEt3

175176 PAGE 14

PLATE 21999-ONE-HALF SIZE

175164 PAGE 14

175163 PAGE 14

175140 PAGE 13

175146 PAGE 13

175155 175142

PAGE I 3 PAGE 13

175152 PAGE 13

175157 175159 PAGE 13 PAGE 13

p l a t e 22000-FULL SIZE

140037 140078 PAGE 13 PAGE 13

140042 175141

PAGE 13 PAGE 13

140041 PAGE 13

PAGE 13

140027 PAGE 10

i

175154 PAGE 13

200125 PAGE 12

204250 PAGE T1

78 50581

PAGE 13 PAGE 13

175149 42030 PAGE 13 PAGES

175144 PAGE 13

U

140040 PAGE 1 3

200175 PAGE I 1

n

175229 PAGE 13

882 PAGE 13

M

175092 PAGE 10

PLATE 22001-rULL SIZE

175177 PAGE U

140043 PAGE 14

175522 PAGE 14

175172 PAGE U

175183 PAGE 15

140044 PAGE I 4

175167 PAGE 14

137 0 PAGE U

175179 PAGE 14

175160 PAGE 13

175171 PAGE 14

125314 PAGE 14

175173 PAGE 14

140045 PAGE 14.

PLATE 22002-FULL SIZE

465 PAGE 1 4

175181 PAGE 14

3

175187 PAGE IS

140046 PAGE I 4

175062 PAGE 10

202098 PAGE 10

175175 PAGE U

175184 PAGE 15

0 0

175161 PAGE 13

1120 PAGE 1 S

175191 PAGE IS

75174 PAGE 1 4

175192 PAGE 1 S

175190 PAGE 15

175069 PAGE 1 I

I

175180 PAGE 1 4

0

1560 PAGE 13

175182 PAGE 14

75 89 PAGE 15

175185 PAGE IS

175063 PAGE 10

0

175065 PAGE 10

I

t;

PLATE 22003-0NE.HALF SIZE

26026 175197

PASE 16 PAGE 16

175195 PAGE 16

120343 PAGE 16

175198 PAGE 16

175196 PAGE 16

120342 PAGE 16

PLATE 22004-FtTLL SIZE

9U.

175115 PAGE 16

175208 PAGE 16

175206 175209 PAGE >6 PAGE 16

175205 PAGE 16

1637 PAGE 16

175203 PAGE 17

1

175424 PAGE 16

175207 PAGE 1 6

' 1 ^

PAGE 1 6

455 PAGE 16

175217

PAGE 17

140048

PAGE 1 6

175210 PAGE 16

175536 PAGE 16

PLATE 22005-ONE.rotJRTH SIZE

175200 PAGE 16

175228

175220 PAGE 18 175225 PAGE 17 ' ^^PAGE 18

175227 PAGE 18

175224 PAGE 17

' 175221

PAGE 17

175222 L'PAGE 17

175214 PAGE 1 7

175216 PACE 17

175210 PAGE 17

/

75212

PLATE 22006-ONE-rOXJRTH SIZE

PAGE 16

PAGE IB

PAGE 16

225388 PAGE is

225^91

PAGE 16

PAGE 18

225259 PAGE 18

202490 PACE I

150203 PAGE 18

Genuine Singer Needles should be used in Singer Machines.

These Needles and their Containers are marked with the

Company's Trade Mark "SIMANCO." l

Needles in Containers marked

**For Singer Machines'*

are not Singer made needles.

-m