SINGER
1500-2
)
IForm 19919 (547)
Printed in U. S. A.
LIST
OF
PARTS
FOR FAMILY S~OPS
MACI-HN~ No. 1500-2
THE SINGER MANUFACTURING COMPANY
From the library of: Superior Sewing Machine & Supply LLC
INSTRUCTIONS FOR OILING
When in continuous use, oil should be applied at least four times a day to all oil holes and parts in movable contact above and below the machine bed. Keep all wicking saturated with oil.
Use only MANUFACTURING SEWING MACHINE OIL, HEAVY GRADE, or MANUFACTURING SEWING MACHINE OIL, HEAVY GRADE- -STAINLESS OIL, sold by The SINGER SEWING MACHINE COMPANY.
'\ ·\At least four times each day apply ONE DROP of oil to the bobbin case holder bearing 1n the sewing hook race.
INDEX
Accessories . . . • . . . B i n d e r s . . . 16 Bobbin Winders . . . • . • . . . Corders . . • . • . . . • . . . • . . • . • . • . . . Edge Folders . . . • • • • . . . Edge Guide (Roller) . . . • . . . Face Plate Thread Lubricator . . • . . . Feed Dogs and Throat Plates . . . . Finger Guards . . . • . . . F1 t t 1 ngs . . . • . • . . . 4 6 Guides (Miscellaneous) • . • . . . • . . . Hemmers . . . 3]
Hems ti tchol" . . . • . . . • . . . Knee Lifters.. . . . • . • . . . 35 Lap Seam Feller . . . . Machine BRRe . . . • . . . Machine No. J 500-2 . . . . Numericrrl Lis L of Parts . . . . Piping Attllchment . . . . Presser F e e t . . . 38 Presser Foot and Extensions . . . . Quil ters . . . . Ruffler . . . • • . . . • . . . Seamer . . . • . . . Thread Stabill.zer . . . • . . . Thread Unw lnder . . . . Tubular Trimming Attachment . . . . Tuckers. . . . • . . . 44
Page 16 to 25 25 ('6 27 28
?.9 C.9
:so
to 49 :Sl to :'i5 :lJ5 to
:s
7 37 37 7~) 1 :18 to 41 41 41 42 43 43 43 44 to 46
INSTRUCTIONS FOR ORD~RING
In ordering !rom this list, use ONLY the part NlNBER in the FIRST column.
The number stamped on a Sewing Machine Part is in every case the number or the single part only.
EVery combination or parts sent out as such has its specific number, wh1ch, although not stamped on the parts, must be used when ordering the combination.
Each number always indicates the SAME PART in whatever list it appears, or tor whatever machine.
The letters after some or the numbers indicate the style or
!1n1sh only, as follows:
A-Hardene~,
Polished, Nickel Plated and Buffed A.A-Buffed and Chromium Plated
A.B-Hardened, Polished, Buffed and Chromium Plated A.C-Brown Baking Enamel Finish
A.D-Gray Baking tnamel Finish
A.E-Hardened, Bright Rumbled and Nickel Plated
A.F-Hardened, Bright Rumbled, Nickel Plated, Bright Rumbled and
1·\
Chromium Plated A.G-Alumilite, Plain A.H-Alumilite, Dyed
A.J-Pc>l1shed, Nickel Plated and Chromium Plated
A.K-Hardened, Polished, Nickel Plated and Chromium Plated A.L-Heat Treated tor Toughness
a-Polished, Nickel Plated and Butted C-Hardened only
c.R-Hardened and Merlized D-Pol1shed only E-8oft, Not Polished F-Hardened and Polished
F.J-Hardened, Polished and Nickel Plated G-Bright Rumbled and Nickel Plated H-Blued
J-Nickel Plated Only K-Hardened and Nickel Plated L-Brass Plated
M-Oxidized N-Japanned, Dull
?-Japanned, Bright P.P-Wrinkle Finish
R-Merllzed S-Cadmium Plated T-Copper Plated
T.A-Hardened, Polished, Copper and Nickel Plated and Buffed T.B-Copper and Nickel Plated and Polished
T.J-Copper and Nickel Plated Only T.K-Hardened, Copper and Nickel Plated T.L-Copper and Brass Plated
T.M-Copper Plated and Oxidized
INSTRUCTIONS FOR ORD(;RING - Continued
U-Zinc Plated v-snver Plated
W-Polished and Nickel Plated X-Black Oxide, tor Iron and Steel
X.C-Hardened and Black Oxide, tor Iron or Steel Y-Black Nickel Plated Only
Z-Chromium Plated
Z.A-Hardened,Polished,Nickel Plated,Bu!!ed and Chromium Plated Z.B-Polished, Nickel Plated, Butted and Chromium Plated Z,C-Hardened and Chromium Plated
Z.D-Polished and Chromium Plated
Z.G-Bright Rumbled, Nickel Plated, Bright Rumbled and Chromium Plated
Z.J-Nickel and Chromium Plated Z. T -copper and Chromi urn Plated
These letters MUST BE USED when they appear in the list;
and AFTER the number as in the list.
In this series:
1 to 1500, 50001 to 51500 and 140001 to 142000 are Screw Numbers
1501 to 1800 and 51501 to 51800 are Nut Numbers 1801 to 2000 and 51801 to 52000 are Roller Numbers 2001 to 50000 and 52001 to 140000 and 142001 to 190000 are Sewing Machine Parts, 190001 and upoard are numbers o! Electrical Parts.
The figures in the second column refer only to the plates, illustrating the parts, and are NOT TO BE USED in ordering.
Parts marked with an asterisk (•) are furnished only when
repairs are made at factory.
'\ ''
Genuine "SINGER" Needles should be used in "SINGER" Machines.
These Needles and their Containers ore marked with the Company's Trade Mark "SIMANCO"
Needles in Containers marked
"FOR SINGER MACHINES"
are NOT "SINGER" made needles. 2
7
LIST OF PARTS
COMPLH~FOR
MACI-UN~ No. 1500-2
FOR TAILOR WORK. FOR
~L~CTRIC DRIV~.MAXIMUM STITCI-I 5 % TO
TI-l~INCI-I.
PR~SS~RBAR LIFT % INCI-I.
N~WL~
BAR
STROK~I
1%
2 INCI-I~S. TI-IR~~PLAIN
B~ARINGS FOR
TI-l~ARM SI-IAFT.
SP~m3000 R. P. M.
No. Plate Name
*144 751P Arm with 15404, 144752 to 144754 and two 143176 . . . . Note: Due to the accuracy required for gear
alignment, Arm cannot be supplied sepa- rately and can only be sent out as a unit, Arm and Bed assembled.
8582 24326 Arm Dowel Pin (2) . . . • . . . 50608R 24326 Hole Plug Screw (back of arm) ..
68350 24326 Oil Cup (spring lid) for oiling Arm Shaft (horizontal) Front Bearing . . . . 56006 24326 Arm Oil Cup (spring lid) Oil Pad
(braided cotton) . . . .
8 No.
54897
144 752 144 753 144 754 868E l40332E 144755 144 756 144758 52263 144 759
140296AL
::~4
761\ 52289 144762
140297AL 144764
52289
52194
144834
144833
140331AL 144765 143014
PARTS FOR MACHIN~ No. 1500·2 Plate
24326
24326 24326 24326 24326 24326 24326
24326 24326 24326
24326 24326 24326 24326
24326 24326
24326
24326
24326
24326 24326 24326
Name
Arm Oil Cup (ball type) for oiling Arm Shaf't (horizontal) Back Bearing . . . . Arm Oil Tube f'or oiling Oil Wick
Holder complete . . . . Arm Oil Tube f'or oiling Arm Shaft
(upright) Bearing (lower) . . . . Arm Oil Tube f'or oiling Rotating
Hook Shaf't (back) Bearing . . . . Arm Screw ( lef't) (2) . . . . (right) (2) . . . . Shaf't (horizontal) . . . . 144 755 with 144 792 . . . . Arm Shaf't (horizontal) Bushing
(center) with 52263 and 144759.
Arm Shaf't (horizontal) Bushing (center) Oil Fad (felt} . . . . Arm Shaft (horizontal} Bushing
(center} Oil Wick (braided cotton} . . . . Arm Shaft (horizontal} Bushing
(center) Set Screw . . . . Arm Shaf't (horizontal} Flanged
Bushing (back} with 52289 and 144 762 . . . . Arm Shaf't (horizontal} Flanged
Bushing (back} Oil Fad (felt} ..
Arm Shaf't (horizontal} Flanged Bushing (back} Oil Wick (braid- ed cotton} . . . . Arm Shaf't (horizontal} Flanged
Bushing (back} Set Screw . . . . Arm Shaft (horizontal} Flanged
Bushing (front} with 52194, 52289, 144833 and 144834 . . . . Arm Shaf't (horizontal} Flanged
Bushing (front} Oil Fad (thick}
( f'elt} • . . . Arm Shaf't (horizontal} Flanged
Bushing (f'ront} Oil Fad (thin}
(felt} . . . · .. · · · Arm Shaf't (horizontal} Flanged
Bushing (front} Oil Fad Retain- er . . . . Arm Shaf't (horizontal} Flanged
Bushing (front} Oil Wick (braided cotton} . . . . Arm Shaf't (hm•izontal} Flanged
Bushing (front} Set Screw . . . . Arm Shaf't (upright} . . . .
Bevel Gear (lower} right hand spiral with two 1259AL . . . • Note: When ordering No. 143014 Class No. of' Ma-
chine must be stated.
No. Plate l259AL 24326 143015 24326
PARTS FOR MACHIN~ No. 1500-2 9 Name
Arm Shnft (upright} Bevel Gear (lower} Set Screw ( 2} . . . . Arm Shaf't (upright} Bevel Gear
(upper} left hand spir1ll with two 1259AL . . . . Note: When ordering No. 143015 Class No. of Ma-
chine must be stated.
1259AL 24326 Arm Shaft (upright) Bevel Gear (upper) Set Screw (2} . . . . 144 767 24326 Arm Shaf't (upright} Bushing (lower}
with 52280 and 144768 . . . . 52280 24326 Arm Shaft (upright} Bushing (lower}
Oil Pad (felt} . . . . 144768 24326 Arm Shaft (upright} Bushing (lower) Oil Wick (braided cotton} . . . . 140298AL 24326 Arm Shaf't (upright} Bushing (lower}
Set Screw . . . . 144770 24326 Arm Shaft (upright} Bushing (upper}
with 52280 and 144768 . . . . 52280 24326 Arm Shaft (upright} Bushing (upper}
Oil Pad (felt) . . . . 144768 24326 Arm Shaft (upright} Bushing (upper) Oil Wick (braided cotton) . . . . l40298AL 24326 Arm Shaft (upright) Bushing (upper) 144 771
50684W 143018
219J 52239
8879 142 755 142756 142757 142758 144 776 144 777
144 778
52184 51369R 143244
143207 140317
24326 24:'\26 24326 24326 24:,27 24327 24328
24328
24;,28 24328 24328
24328 24328
24328 24328
Set Screw . . . . Arm Side Cover (front) . . . . Thumb Screw . . . . Shield . . . . Screw . . . . Spool Pin and Thread Eyelet ... . Washer (cloth) . . . . Top Cover for 142756 . . . .
142755 with 144777 and 144778, for 142759 . . . . Arm Top Cover for 142758 . . . .
142757 with 144777 and 144778, for 142760 . . . . Arm Top Cover Gasket (cork) . . . . Oil Tube (long} with 52184, f'or oiling Feed l,ifting Rock Shaf't Connecting Rod . . . . Arm Top Cover Oil Tube (short) with
52184, for oiling Feed Rock Shaf't Connecting Rod . . . . Arm Top Cover Oil Tube Packing
(wick} (2} . . . . Arm Top Cover Screw ( 2} . . . . Arm Top Cover Spool Pin and Spool
Rest, 3 1/2 in. long, for 142 760 . . . . Arm Top Cover Stitch Regulator
Plunger . . . . • . . . Arm Top Cover Stitch Regulator
Plunger Hole Plug Screw f'or plugging the Plunger hole when the Plunger is removed to pre- vent tampering with the stitch set . . . . • . • . . . • . . .
10 No.
64519 218J 142759
Plate 24328 24328 24328
PARTS FOR MACHIN~ No. 1500-?
Name
Arm Top Cover Stitch Regulator Plunger Spring . . . . Arm Top Cover Stitch Regulator
Plunger Stop Screw . . . . Arm Top Cover with Stitch Regulator
Plunger complete, Nos. 218J, 64519, 142756 and 143207 . . . . Note: No. 142759 is regularly furnished with
this Machine.
142 760 24328 Arm Top Cover with Stitch Regulator Plunger complete, when a longer Spool Pin is required, Nos.
218J, 64519, 142758, 143207 and 143363
51283AL
*l44781P
24328 24328
143244 . . . . Balance Wheel (disc, power) wtth
two 51283AL, for "V" belt . . . . Balance Wheel Set Screw (rc) •••.••••
Bed
Note: bue to the accuracy required for gear alignment, Bed cannot be supplied sepft- rately and can only be sent out as a unit, Arm and Bed assembled.
l4.43lX 4307
24327 Bed Slide 725X
12432 144827
143293 143228 143229 50117J 143230
50117J 143231 140061J 140050J 143030
51220AL l607C 143185
704C 143186 143187
24327 24327 24327
24327 24327 24327 24327 24327 24327 24327 24327 24330 24330 24330 24330 24330 24330 24330
Note: Feed with 313C 24330
Spring
n Screw (2) Bed Slide complete, Nos. 4307,
12431X and two 725X . . . . Combination of Feed and Stitch
Regulator Parts, Nos. 143123, 143134, 143293, 144785, 144788 and 144821 . . . . Dummy Shaft for 144827 . . . . Face Plate . . . . Thread Guard (lower) . . . .
"
Screw . . . . Face Plate Thread GuRrd (upper) ... .
" "
Screw . . . . Face Plate complete, Nos. 143228 to
143230 and two 50ll7J . . . . Face Plate Screw (lower) . . . . (upper) . . . . Feed Bar . . . .
" Adjusting Screw (2) . . . .
" Nut (2) •••
Body with two each l607C and 51220AL . . . . Feed Bar Body Screw . . . . Shank . . . . Feed Bar (tilting adjustable) com-
plete, Nos. 704C, 143185 and 143186 . . . . Bar No. 143030 is regularly furnished this machine . . . .
Feed Bar Screw Center (2) . . . .
PARTS FOR MACHIN~ No. 1500-2 11
No. !'late Name
!:>6813 Feed Bar Screw Cenler 3l3C with 1519J ( 2) . . . ' ... '. ' . . . . " . . . . . 1519J 24~)::)0 Feed Bar Screw Center Nut (2) . . . . 44252 202 7 Dog, 12 teeth ( 12 teeth to the inch) for 44256 . . . " . . . . . 50117AL 24:',27 Feed Dog Screw (2) . . . . 14312 3 24326 Eccentric w.i th l375AL and two
l036AL .. , . . . . 1375AL 24.526 Feed Eccentric Body Position Screw.
l036AL 24326 Set Screw (2) ..
140256AL 24326 Stop Screw (7
stitch) . . . . 140257AL 24326 Feed Eccentric Stop Screw (5 1/2
stitch) . . . . 140258AL 24326 Feed Eccentric Stop Screw (14
stitch) . . . . Note: No. 1402~7 is regularly furnished with
this Mar.hine . . . . 144782 24326 Feed Lifting Eccentric and Arm
140333AL 24326 l259AL 24326 144783 24330 144 784
144 785 24326 140230C 24326 l518J 24326 52265 24330 l57J 24330 52266 24330 52267
125060 24330 50191C 24330 52097
1513J 24330 144 7 86 24330 144 787
144788 24326 l40230C 24326
Shaft (horizontal) Bevel Gear, right hand spiral, with 1259AL, 140333AL and 143088 . . . . Feed Lifting Eccentric Position
Screw . . . . Feed Lifting Eccentric Set Screw .. . Rock Shaft . . . . Feed Lifting Rock Shaft complete,
Nos. 52265 and 144783 . . . . Feed Lifting Rock Shaft Connecting
Rod . . . . Feed Lifting Rock Shaft Connectir~
Rod Hinge Screw . . . . Feed Lifting Rock Shaft Connecting
Rod Hinge Screw Nut . . . . Feed Lifting Rock Shaft Crank with
l57J and 52267 . . . . Feed Lifting Rock Shaft Crank
Clamping Screw . . . . Feed Lifting Rock Shaft Crank Slide Block . . . . Feed Lifting Rock Shaft Crank Slide Block 52266 with 125060 . . . . Feed Lifting Rock Shaft Crank Slide Block StC.d . . . . Feed Lifting-Rock Shaft Screw
Cehter (2) • • • . • • • • . . • • • • • • • • • . • Feed Lifting Rock Shaft Screw
Center 50191C with 1513J (2) ...
Feed Lifting Rock Shaft Screw Center Nut (2) . . . . Feed Rock Shaft . . . . Feed Rock Shaft complete, Nos.
144786 and 144789 . . . . Feed Rock Shaft Connecting Rod . . . . . Hinge Screw . . . .
12
No.
l518J 144 789
l57J 50191C 52097
l513J 142770 140184E
145E 142766 142767 142 768 130911 50668E 5066,9E 25878 50190W 12 7243 12 7244 143251 ll33E 52014
n;:,3E 127231 144819 775E 52207 143057 207E 143058 144 792
l065AL 127245
51229J 127246 140ll9F
56015
Plate 24326 24330 24330 24330
24330 24326 24326 24326 24326 24326 24326 24326 24326 24326 24327 24327 24329
24329 24329 24329 24329 24329
24329 24329 24329 24329 24329 24326 24326 24329 24329 24329 24329 24326
PARTS FOR MACHIN!: No. 1500-2
Name
Feed Rock Shaft Connecting Rod Hinge Screw Nut . . . . Feed Rock Shaft Crank with 157J ... .
Clamping Screw . . . , . . . , , ..
Feed Rock Shaft Screw Center (2 ) ...
" " II 50191C
with l513J (2) . . . . Feed Rock Shaft Screw Center Nut
(2) •.••• ' •••.• -' .. ' ' ' .• ' ' • . . • . . Gear Case (lover) (two pieces) with l40184E and three 145E . . . . Gear Case (lover) Plug Screw . . . . Screw ( 3) .. , . . . . . (upper) (two pieces) with 50668E and 50669E . . . . Gear Case (upper) Oil Cup . . . , ... .
• 142767
with 130911. . . . Gear Case (upper) Oil Cup Oil Wick
(braided cotton) . . . . Gear Case (upper) Screw (long) . . . . .
II n II (short) . . . .
Guide . . . , . . . . Thumb Screw . , . . . , .. , . . . . Needle Bar (hollow) . . . .
127243 with 51229J, 127245 and 127246 . . . . Needle Bar Bushing (lover) . . . .
" Set
Screw . . . , . . . . Needle BRr Bushing (upper) . . . .
" Set
Screw . . . , ..
Needle Bar Connecting Link with 52207 . . . ' . ' . ' • . . . • . . . Needle Bar Connecting Link 127231
with 143057 . . . . Needle Bar Connecting Link Cap
Screw . . . . Needle Bar Connecting Link Lubri-
cating Pad (wood) . . . . Needle Bar Connecting Stud with
207E • . . . Needle Bar Connecting Stud Clamping Screw . . . . Needle Bar Connecting Stud Slide
Block . . . . Needle Bar Crank with l036AL,
l065AL and l40327AL . . . • Needle Bar Crank Position Screw ...•
Thread Guard . . . . Screw . . . . Clamp with l40ll9P . . . • . . . .
Screw., . . . . • . . . , ...
Oi1 Tube for 144793 . . . • .
No.
144 793
50156E 143197
144823 144 795 144 7 96 1402:'>2J
12391 14::>184 ll33E 52338
453AL 5990 143079
448AL 12327 12139 11170 20458 140390AL
688W 144828 144829 144830 144831 144832 40264 52235 522 36 40392 125320 2974 2975 592E 40393
PARTS FOR MACHIN!: No. 1500-2 13
Plate 24326
24326 24326
24326 24326 24326 24326 24329 2432 9 24329 24329 2432 9 24329 24329 2432 9 24329 24329 24329 24329 24329 24329 2432 9
2432 9 24329 24329
24329 24329 24329 24329 24329 24329
N11me
Oil Tube Bracket with 56015, for oiling Arm Shaft (upright) Bearing (upper) . . . . Oil Tube Br11cket Screw . . . . Wick for oiling Needle Bar Con- necting Link, Thread Take-up Lever, Thread Take-up Lever Hinge Bearing and Thread Take-up Lever Link for 144823 (2) . . . ' . . • . • . • • • . . . • . • • . • • . • • Oil Wick Holder with two 143197 . . . . Oil Wick Holder complete, Nos.
144796 11nd 144823 . . . . Oil Wick Holder Cap for 144795 ••...
Screw . . . . Presser Bar (hollow) . . . . Bushing (lover) . . . .
Set Screw . . . . Presser Bar Guide Bracket with 223C and 453AL . . . . Presser Bar Guide Bracket Set Screw Lifter . . . , . . . . Hinge Stud . . . . Set Screw . . . . Presser Bar Lifting and Releasing
Lever Bracket . . . . Presser Bar Spring . . . . Washer . . . • Foot (solid) for general and tailor work . • . . . Presser Foot Screw . . . . Pressure Regulating Thumb Screw . . . . Rotating Hook with three 1253AL . . . .
144828 with 127102 and four 1053E . . . , . . . . Rotating Hook 144829 with 40274,
143252 and three l367E . . . . Rotating Hook 144829 with 40274 and three 1367E (for agents only) ..
Rotating Hook 144830 with 52237 ... . Bobbin . . . . Case . . . .
52235 with 591F, l380E and 40394 . . . . . Rotating Hook Bobbin Case Latch ... . Lever . . . . Rotating Hook Bobbin Case Latch
Lever Fulcrum Pin . . . . Rotating Hook Bobbin Case Latch
Spring . . . . Rotating Hook Bobbin Case Latch
Stop Screw . . • . . . • • . Rotating Hook Bobbin Case Hinge,
Nos. 2974, 40392 and 125320 . . . .
14
No. Plate
591? 24329 40394 24329 l380E 2432 9 52237 24329
l4:S253
143252 24329 52018 24330 704J 24330 40274 24329 l367E 24329 l253AL 24329 144797 24330 144 798 24330
l259AL 24330 141800 24330 52280 24330 144801 24330 l40261AL 24330 144803 24330 52280 24330 141801 24330 142008 24330 140261AL 24330 127102 24329 l053E 24329 144821
144822
52337 24329 223C 24329 143085 24326
PARTS FOR MACHIN!: No. 1500-2
Name
Rotating Hook Bobbin Case Tension Regulating Screw . . . . Rotating Hook Bobbin Case Tension
Spring . . . . Rotating Hook Bobbin Case Tension
Spring Screw . . . . Rotating Hook Bobbin Case complete,
Nos. 592E, 2975, 40393 and 52236 . . . . Rotating Hook Bobbin Case 52237
with 143252 . . . . Rotating Hook Bobbin Case Holder .. . Position Bracket . . . . Rotating Hook Bobbin Case Holder
Position Bracket Screw . . . . Rotating Hook Section . . . .
" Screw (3) ... .
Set Screw (3) . . . . Shaft . . . .
Bevel Gear (lef"t hand spiral) with two l259AL . . . . Rotating Hook Shaft Bevel Gear Set.
Screw (2) . . . . Rotating Hook Shaft Bushing ( bnck)
with 52280 and 144801 . . . . Rotating Hook Shaft Bushing (back)
Oil Pad (felt) . . . . Rotating Hook Shaft Bushing (bnck)
Oil Wick (braided cotton) . . . . Rotating Hook Shaft Bushing (back)
Set Screw . . . . Rotating Hook Shaft Bushing (front)
with 144801 and two 52280 . . . . :.
Rotating Hook Shart Bushing (front) Oil Pad (felt) (2) . . . . Rotating Hook Shaft Bushing (front) Oil Wick (braided cotton) . . . . Rotating Hook Shaft Bushing ( f"ront) Oil Cup . . . . • . . . Rotating Hook Shaft Bushing ( t'ron t )
Set Screw . . . . Rotating Hook Thread Guard . . . .
" " 11 Screw
(4) . • . . • • . . . • • . • • . • . . • • . . • • Set or Mated Gears complete for
upper shaft, Nos. 143015, 143087 and 144782 . . . . Set of Mated Gears complete for
lower shaft, Nos. 143014 and 144 798 . . . • . . . Slack Thread Regulator . . . .
Set Screw .. . Stitch Regulator . . . • . . .
No. Plato
143134
14:'>086 24326 143087 24326 143088 24326 143089 24326 140380E 24326 2102 24327 l560C 24327 32572 2432 7 52445 24327 12398 2432"1 12329 24327 32574 24327 2103 24327 50304C 24:'>27 52098
50305C 24327 52::,97 24327
143135 24327 52454 24327 624AL 24327 144804 24329 144805 24329 144806
l40327AL 24326 l036AL 24326 143241 24326 144807
52023 24 329 143096 24329 143097 24329 435AL 24329 52130 24329 144808
52394 24327 52083 24~)2 7 443AL 24327 44256XC 24327 691XC 24327 144809 24023
*15404 143176
PARTS FOR MACI-HNE No. 1500-2 15
Nnme
Stitch Regulator 143085 with l40380E, 143086 and 143089 . . . . . StJ tch Regula tor Locking Slide . . . . . Stitch Regulator Locking Slide
Ratchet Wheel . . . . Stitch Regulator Locking Slide
Ratchet Wheel Pin . . . . Stitch Regulator Locking Slide
Sprlng . . . . Stitch Regulator Locking Slide
Spring Screw . . . . TensionDisc (2) . . . .
Regul~ting Tht®b Nut . . . . Releasing Disc . . . . Lever . . . . Hinge Pin ..
Spring . . . . . Pin . . . . Spring . . . . Stud . . . . 50304C w 1. th l560C . . . . . Set Screw . . . . Tension Complete, Nos. 2103, 32572 , 32574, 52083, 52098, 52394 and two 2102 . . . . Thread Guard (side of arm) . . . . Retainer . . . . Set Screw . . . . TliTead Take-up complete, Nos.
143097, 144806 and 144808 . . . . Thread Take -up Crank . . . • . .
" " " 144805 with 775E and 144819 . . . • . • . . Thread Take-up Crank Clamping Screw Position Screw Wearing Plate.
Lever with 52130 ...•
Hinge Stud ... . Link . . . .
Hinge Stud . . . • . Thread Take-up Lever Link Hinge
Stud Set Screw . . . . Thread Take-up Lever Thread Eyelet
Bushing . . . . Thread Take-up Lever complete, Nos.
52023, 143096 and 144807 . . . . Thread Take-up Spring . . . .
'' " '' Regulator
with 50305C . . . . Thread Take-up Spring Regulator Set Screw . . . • . . . . • . . Throat Plate (large needle hole)
f'or 44252 . . . • . . . Throat Plate Screw (2) . . . . Drip Pan with four l in. wire nails Trade Mark . . . .
Rivet (2) . . . .
16
No. Plate
1236]
41564 24331 120342 24331 120343 24331 26026 24331 26485 24331 8909 24331 8908 24331
ACCESSORIES
Name
Machine Hinge Connection (?) •.•••••
Machine Rest Pin (wood) 4 in. long.
Oiler (copper plated) with 120343 ..
Spout, 3 1/2 in. long . . . . Screw Driver (large) . . . . (small) . . . , . . . . Wrench for 1513 and 1518 . . . . 1519 and 1520 . . . .
BINDERS
WHI::N ORDI::RIN6 BINDERS SEND SAMPLE OF THI::
:\ No.
25644 25646 25855 2564 7 15770 25648
334J 7071 25650 190J
No.
25651 25653
BINDIN6 AND MATERIAL TO 81:: BOUND
BINDER {Adjustable)
Plate 22912 22 912 22912 22912 22912 22912 22912 22912 22912
SIZI:: I Name
Bed . . . • . . . · Folder Guide (lower) with 25855 ... . Screw Stud ... . (upper) . . . . Thumb Nut . . . . . Pressure Spring . . . . Screw . . . . Washer . . . . Binder complete, Nos. 334J, 15770,
7071, 25644 and 25646 to 25648.
Binder Screw . . . .
BINDER (Adjustable)
SIZE 2
THIS BINDI::R IS THE SAME AS 25650 WITH THE FOLLOWIN6 I::XCI::PTIONS:
Plate Name
22912 Bed, in place of 25644 . . . . 22 912 Binder complete, Nos. 334J, 15 FID,
7071, 25646 to 25648 and 25651.
No.
25654 25656
No.
36456 36457 25672 656E 15360 25673
401E 334J 36459 36460 233J 36461 36462 233J 25677
334J 36463
BINDI::RS
BINDtR
{Adjus~able) SIZE 317
THIS BINDI::R IS THE SAME AS 25650 WITH THE FOLLOWIN6 I::XCI::PTIONS:
Plate 22 912 22912
Plate 22913 22913 22913 22913 22913 22913 22913 22913 22 913 22913 22913 22913 22913 22913 22913 22 913 22913
Name
Bed, in place of 25644 . . . . Binder complete, Nos. 3j4J, 15770,
7071, 25646 to 25648 and 25654.
BINDER
(Adjus~able) FOR SOFT HATSName
Bed . . . , . . . · . · · · Folder . . . .
Slide Carrier with 656E . . . . . Adjusting Screw . . . . Folder Slide Carrier Adjusting
Thumb Nut . . . . Folder Slide Carrier Adjusting
Thumb Nut Guide . . . . Folder Slide Carrier Adjusting
Thumb Nut Guide Screw . . . . Folder Slide Carrier Screw (2) . . . . . Guide (back, lower) . . . ..
(back, upper) . . . . (back) Screw . . . . (front, lower) . . . • . . (front, upper) . . . • (front) Screw . . . . Pressure Spring . . . .
" Scre'W ••••••••••• • • • Binder complete, Nos. 401E, 15360,
25672, 25673, 25677, 36456, 36457, 36459 to 36462, two 233J and three 334J . . . . l90J 22913 Binder Screw . . . . 28713 22913 Presser Foot, for soft hat binding
for 36463 . . . ·. • Note: Presser Foot 28713 is used with, but not
No.
120165 28972 9400
included in 36463 . . . .
BINDER (Adjust11ble)
FOR SLffVE FACIN6S ON MILITARY COATS
Plate 22913 22913 22913
Name
Binder . • . . . • . . . • Arm .•.•••.•.•.•.•.•••.. ·•·•·••··•••
Hinge Screw . . . .
18 No.
28973 51224W
7071 120166
No.
120955
No.
121444
2~721
207F 7071 25983 25722 l90J 7071 121445XC
26250
No.
12370
26465XC
35741XC
Plate 22913 22913 22913 22913
Plate 22913
Plate 22914 22914 22914 22914 22914 22914 22914 22914 22914 22914
BINDERS
Name
Hinge Plate... . . . . Shank Thumb Sere~ . . . . Washer . . . . Binder complete, Nos. 940D, 7071,
28972, 28973, 51224W and 120165
BINDER (Boston)
Nam.e
Binder (Boston) on Shank . . . .
BIND!:::R (tnglish)
FOR BINDING UP TO 9j16 INCH
Name
Feed Dog, 13 teeth (16 teeth to the inch) for 121445 . . . . Folder . . . .
Sere~ . . . . Wnshnr . . . . Presser Foot . . . . Ribbon Tension . . . .
Sere~ . . . . Washer . . . . Throat Plate for use ~ith 121444 .•.
Binder complete, Nos. 190J, 207F, 25721, 25722. 25983, 121444.
121445XC and t~o 7071 . . . .
BIND!:::R (English)
LARGE ··D" FEED
THIS BINDER IS THE SAME AS 26250 WITH THE FOLLOWING EXCEPTIONS:
Plate 22914
22914
Name
Feed Dog, 15 teeth (16 teeth to the inch) for use ~ith 26465 and
357~1, in place of 121444 . . . . Throat Plate, large needle hole,
for use with 12370, in place of 121445 . . . • . . . • . . . Throat Plate, small needle hole,
for use with 12370, in place of 121445 • • . . . 26466 22914 Binder complete, Nos. 190J, 207F,
12370, 2572l, 25722, 25983, 26465XC or 35741XC and two 7071
No.
44252 4425:)
28655XC
28656XC
28657
No.
194 74 25733 207F 7071 26400 25734 190J 7071 26401XC 26402
No.
121446 28334 193J 7071
BINDERS 19
BINDER (tnglish)
THIS BINDER IS THE SAME AS 26250 WITH THE
Plate
22915
22915
22915
Plate 22916 22916 22916 22916 22916 22916 22916 22916 22916 22916
Plate 22917
22917 22917 22917
FOLLOWING EXCEPTIONS:
Name
Feed Dog, 12 teeth (12 teeth to the inch) for use ~ith 28655 and 28656, in place of 121444 . . . . Feed Dog, 16 Leeth (]6 teeth to the
in"h) for use with 28655 and 28656, in place of 121444 . . . . Throat Plate, small needle hole, for
use with 44252 and 44253, in place of 121445 . . . . Throat Plate, large needle hole, for
use with 44252 and 44253, in place of 121445 . . . . Binder complete, Nos. 190J, 207F,
25721, 25722, 25983, 28655XC or 2f.l656XC, 44252 or 44253 and two 7071 . . . .
BINDER {English)
FOR CUT CLOTH
Name
Feed Dog, 14 teeth (16 teeth to .the inch) for uee ~ith 26401 . . • . • . . . Folder, for 1/2 inch binding . . . .
Screw . . . • . . . • . . Washer . . . . Presser Foot . . . • . . . Ribbon Tension . . . .
Screw ( 2 ) . . . . Washer (2) . . . . . Throat Plate for use with 19474 . . . . . Binder complete, Nos. 207F, 19474,
25733, 25734, 26400, 26401XC, two l90J and three 7071 . . . .
BINDER (English)
FOR HEAVY WORK
N11me
Feed Dog (spiked teeth) 13 teeth (10 teeth to the inch) for use ~ith
12144 7 . . . • . . . Folder . . . .
Screw . . . . • . . . Washer . . • . . . • . • . . .
20
No.
28676 28337 2::,33 12144 ?XC
28678
Plate 22917 22 917 22917 22917 22917
BINDERS
Name
Presser Foot . . . . Ribbon Tension . . . .
" Screw (2) . . . . Throat Plate ror use with 121446 . . . . Binder complete, NoA. l93J, 7071,
28334, 28337, 28676, 121446, l21447XC and two 233J . . . .
BINDl:R {l:nglish)
FOR LIGHT WORK
THIS BIND~R IS TH~ SAM~ AS 28678 WITH TH~
No.
121269 121270
\
Plate 22917 22917
FOLLOWING ~XC~PTIONS:
Name
Presser Foot, in place of 28676 . . . Binder complete, Nos. l9:'JJ, '1071,
28334, 28337, 121269, 121446, l2l447XC and two 23:'JJ . . . .
BINDl:R {l:nglish)
FOR CARPETS
THIS BIND~R IS TH~ SAM~ AS 28678 WITH THE FOLLOWING ~XCEPTIONS:
No. Plate
12370 22915
28775XC 22915 28776 22915
No. Plate
120434 22916 120433 ,22916 207F 22916 7071 22916 120435 22916 25722 22916 l90J 22916 7071 22916 l20436XC 22916 120437 22916
Name
Feed Dog,· 15 teeth (16 teeth to the inch) for use with 28775, in place of 121446 . . . . Throat Plate !"or use with l2j70, in
place of 121447 . . . . Binder complete, Nos. l93J, 7071,
12370, 28334, 28337, 28676, 28775XC and two 233J . . . .
BINDER {English)
FOR AWNINGS
Name
Feed Dog, 7 teeth (16 teeth to the inch) ror use with 120436 . . . . Folder . . . . Screw . . . • . . .
Washer . . . . Presser Foot . . . , . . . . Ribbon Tension . . • . . . . • . . • . . . . • . . .
Screw . . . . Washer . . . . Throat Plate ror use with 120434 ...•
Binder complete, Nos. l90J, 207F, 25722, 120433 to 120436XC and
two 7071 . . . . • . . • . • . . . • . • • . . .
No.
120458 12 0459
No.
lcOl24 120120 12 0121 665J 220J 1806 ] 2 012 5 l201?c·
190.1 /071
BINDERS
BIND£R {l:nglish)
21
FOR SLIP COV~RS AND G~NERAL WORK THIS BIND~R IS THE SAM~ AS 120437 WITH TH~
Plate 22918 22918
Plate 22918 22918 22918 22918 22918 22918 229] 8 229Hl
<~2918
?2918
FOLLOWING ~XC~PTIONS:
Name
J'r8sser Foot, in place or 120435 . . . . Binder complete, Nos. 190J, 207F,
25722, 120433, 120434, l20436XC, 120458 and two 7071 . . . .
BINDER {English)
Name
Feed Dog, 6 teeth (16 teeth to the inch) for use with 120126 . . . . Folder with 665J and 120121 . . . . Guide . . . . Screw . . . . Screw . . . . Wa:;her . . . . l'res:;er Foot . . . . Ribbon Tension . . . . Screw ( 2 ) .. · . . . . Washer (2) . . . . . 120l26XC 22918 Throat Plate !"or use with 120124 . . . . 12012 7 22 918 Binder complete, Nos. 220J, 7806,
120120, 120123 to 120126XC and two each l90J and 7071 . . . .
BINDER (Transverse) ON
S~ANKFOR FOLDED OR UNFOLDED BIAS BINDING
No.
121161 4'i525 51097J
:1146 121397 121169 121412 2'i2G:"l 5109/J 120536
(WITH TAPE RE~L)
FOR GI"N~RAL WORK FOR
%
IN., }'8 IN. AND I IN. TAPEPlate Name
22919 Binder Folder on Shank . . . . 22 919 Binder Steady Pin . . . . 22919 Thumb Screw . . . .
22919 Washer . . . .
~2919 Peed Dog, 18 teeth (15 teeth to the inch) for use with 121398 . . . . 22919 l'resser Foot . . . . 22 919 Tape Reel Arm with 8879, 23263 and
120537 . . . . 22919 Tape Reel Arm Steady Pin . . . . 22919 Thumb Screw . . . .
22 919 Disc with 120538 and
120539 . . . .
22
No.
120537 8879 120538 120539 l21398XC 121168
No.
120532 51097J
3146
..
,26603 \ 120737
217J l90J 7071 120738 120739 120535 23263 51097J 120536 120537 120538 120539 120775 120740 42290 120741XC
43525 120742
Plate 22919 22919 22919 22919 22919 22919
BINDERS
Name
Tape Reel Disc Pin . . . . Washer (cloth) .. . Stud ('.load) . . . . Sleeve (brass) ..
Throat Plate '.lith 43525, for use '.lith 121397 . . . . Binder (transverse) on Shank com-
plete, for 3/4 in., 7/8 in., and 1 in. tape, Nos. 3146, 120536, 121167, 121169, 1!1397,
12139BXC, 121412 and t'.lo 51097J.
BINDER AND PIPING ATTACHMENT
Plate 22920 22920 22920 22920 22920 22920 22920 22920 22920 22920 22920 22920 22920 22920 22920 22920 22920 22920 22920 22920 22920 22920 22920
Name
Binder (transverse) on Shank . . . . Thumb Scre" . . . . Binder (transverse) on Shank Thumb
Scre'.l Washer . . . . Feed Dog, 20 teeth (16 teeth to the
inch) for use '.lith 120741 . . . . Piping Attachment '.11th 217J . . . ..
Adjusting Sere'.l .. . Scre'.l (2) . . . . Washer (2) ..
Presser Foot . . . • . . . Tape Guide . • . . . Reel Arm '.lith 2~263 and 120537.
Pin . . . . Thumb Scre'.l . . . . Disc '.lith 120538 and 120539 (2) . . . • . . . Tape Reel Disc Pin . . . .
" .stud ('.load) (2) . . . . ..
Sleeve (brass) (2) •••••••.•••••••••••.•••••••.•
Tape Reel Pin . . . • . . . 120775 '.lith 42290 . . . . . Washer . . . . Throat Plate '.lith 43525, for use
with 26603 . . . . Throat Plate Stud . . . . Binding and Piping Attachment com-
plete, Nos. 3146, 26603, 120532, 120535, 120737 to 120741XC and two each 190J, 7071, 51097J and 120536 . . . .
No.
120801 120802 36700 28717
?J5069 28769
No.
2S'/05 25706 25707 25708 2S709 25710 25711 25712 t-::57]3 25714 25715 28611 286:il 28632 28633 28634 28635 28637
28638 28639 28641 28643 28693 28724 28938 28732 28733 28804
P J:l te 2?.921 22:J21 22 92]
22921 22921 22921
Plate 2? 822 22922 22 922 22 922 2?. 922 22922 22922 229?.2 :.:2 922 22922 22922 229?.2 22922 22 922 22 923 2£' 923 22922 22925
229?.4 22 922 22922 22 924 22922 22923 22 cl23 22 925 22,!22 22 923
BIND!::RS 23
r;!NDI:RS
(Foot)
Name
Binder for Keneral '.lark . . . . Binder for t',eneral '.lork . . . . Bl nder (left) . . . . (right) . . . . for strip to turn the upper edge in, for skirt racings, etc.
Binder to turn top only . . . .
BINDERS ON SHANK
Nnme
Bii;<ler on Sh·mk f'or
:)/8
in. tape ... . 'i/16 ln. Lape .. . 1/2 in. tape . . . . 9/16 in. tnpe .. . S/8 in. tape . . . . ll/16 in. tape ..3/4 in. tape . . . . Li/16 in. tape ..
7
/u
in. tflpe . . . . 15/16 in. tape ..1 in. tape . . . . Binder on Shank for suspender '.lebs ..
" Shank . . . . to turn edges under.
top edge only for binding coats . . . . Binder on Sh·mk to turn top edge
only for ra'.l edge binding . . . . Bin~er o~ Sh:;nk ~or 7/8 in. binding.
1 or bias binding, to turn top edge only, '.lith KUide for inserting canvas strip . . . . Binder on Shank for dr->s8 shields .. .
to turn top edge only, for suspenders . . . . Binder on Shrmk for ll/16 in. bind-
ing . . . . Binder on Sh11nk '.lith Guide (wire)
f'or mattress work . . . . Blwler on Slmnk J'or binding the aPm
holes in cotton garments . . . . Binder on Sh11nk for binding the neek
or knit under'.lear . . . . ProRser Foot for use '.lith 28724 . . . . . Blnrler on Shank to turn under both
edges of binding . . . . Binder on Shank for binding corset
covers . . . . B.tndeP on Shank for binding dress
shields . . . .
24
No.
35040 28970 35065
35208
194 74
35066 7298 120143 19335 120144
194 75XC
·~
28731 35226 35352 35353 1425B 2749 35354
No.
28619 28620 35067
35066 7298 120143 19335 120144
28642 28941
Plate 22923 22924 22926
22926
22926
22926 22926 22926 22926 22926
22926 22925 22925 22924 22924 22924 22924 22924
BINDERS
Name
Presser Foot for use with 28804 ... ".
Binder on Shank for bias binding, to turn both edges under . . . . Binder on Shank for strip, to turn
in upper edge only, for skirt facings, etc . . . . Binder on Shank, to turn in both
edges, for bias or straight binding, for skirts, wrappers, shirt waist, etc . . . . Feed Dog, 14 teeth (16 teeth to the
inch) for use with 19475 and 35208 . . . . Presser Foot for use with 35065 and
35208 . . . • . . . Presser Foot Hinge Pin . . . .
Plate . . . . Shank . . . . Presser Foot (hinged) complete for
use with 35065 and 35208, Nos.
7298, 19335 and 120143 . . . . Throat Plate (large needle hole) for use with 194 74 . . . . Binder on Shank, to turn under both
edges of binding l/8 1n . . . . Binder on Shank, for mattress work ..
Folder on Shank . . . • . Binder Folder Hinge Plate . . . .
Screw . . . . Friction Washer . . . . Binder on Shank (hinged) complete,
for mattress work, Nos. 1425B, 2749, 35352 and 35353 . . . .
BINDtRS (Horn) ON SHANK
Plate 22927 22927 22927
22927 22927 22927 2292 7 22927
2292 7 22927
Name
Binder (horn) on Shank . . . . Presser Foot for use with 28619 . . . . . Binder (horn) on Shank, for strip,
to turn both edges in, for ladie.s' collars, etc . . . . Presser Foot for use with 35067 . . . . . Hinge Pin . . . . Plate . . . , . . . . Shank . . . . Presser Foot (hinged) complete, for
use with 35067, Nos. 7298, 19335 and 120143 . . . . Binder (horn) on Shank . . . .
for bias binding, to turn under both edges of binding . . . .
No.
35062
35063
No.
259428 259429 200ll3F 259430 225453 225454 2022F7 259660 225455 225456 259461 200380C 225381 225444 200056E 225458 225459 225459 2024 78 200299H 225461 200082D 228026
2102 13710 201499B 201572B 225462
259462
Plate 22927
2292 7
BINDERS 25
NRme
Binder• (horn) on Shank, for 7/8 in.
to 1 1/2 in. wide, for tape, for mattresses . . . . Presser Foot for light work for use
with 35062 . . . .
BOBBIN WINDERS
BOBBIN WINDtR
(SWINGING AUTOMATIC, RIGHT HAND) FOR POWER TABLE
PlRLe 232!::>3 23253 23253 232!::>3 23253 23253 23253 23253 23253 23253 23253 23253 23253 23253 23253 23253 23253 23253 23253 23253 23253 23253 2 3253 23253 23253 23253 23253
23253
FOR "V" BELT
Name
Brake (leather) . . . . Clamp . . . · . · · ·
Screw . . . . Bobbin Winder and Tension Bracket
Base . . . . Frame with 202277 and 259660 . . . • .
Hinge Pin . . . · 011 Packing (wick) . . . . Well Washer . . . . Spring . . . . Plunger . . . . Pulley with 200380C . . . ..
Set Screw . . . . Spindle . . . . Stop Latch . . . • . . .
Screw . . . . Thumb Lever . . . . Hinge Stud, ..
Joint Stud .. . Trip Lever . . . . Hinge Screw .. . Tension Bracket with 201499B . . . . Screw . . . . Washer . . . . Disc ( 2 J ••••••••••••••.•••••
Spring . . . . Stud . . . . Thumb Nut . . . . Tension Bracket complete, Nos.
13710, 201572B, 225461 and two 2102 . . . . Bobbin Winder complete for "V" belt, Nos. 200056E, 200082D, 200ll3F, 200299H, 202478, 225381, 225444, 225453 to 225456, 225458, 225462, 228026, 259428 to 259430, 259461, two each 225459 and wood screws 3/4 in. No. 12 R.H .••••••.•.•... ·. · · • · · · •
' 26
CORD~RS
WHI:N ORDI:RING CORDI:RS, OR PARTS THtRI:OF, STAT!:
No.
26795 26796 l044D 120206
457AL l90J 1202 07 121446
120208 26605XC
No.
25788 l90J 25791 25790 879D 25792 12372 25984 l2442XC 26328
l35D
No.
28629
26167
SIZt OR NUMBI:R OF CORDS TO THI: INCH
CORDI:R
(Adjus~able) FOR SHORT TURNS ON CUSHIONS Plate24332 24332 24332 24332 24332 24332 24332 24332
24332 243:'l2
Name
Cord Guide . . . , . . . . Arm . . . . Hinge Screw . . . . Bed with 457AL . . . . Leveling Screw . . . .
Screw~ , , , .. ~ .. " .. , . " . Corder compJ e te, Nos. l90J, l044D,
2679::>, ?.6796 and 120<~06, . . . . Feed Dog, spiked teeth, 13 teeth {10 teeth to the inch) ror use with 26605 . . . 0 • • • • • ' • • • ' 0 • • •
Presser Foot {grooved) . . . . Throat Plate, ror use with 121445 .. .
CORDER !=OR TOP CORDING
Plate 22929 22929 22929 22929 22929 22929 22929 22929 22929 22929 22929
Name
Arm . . . . Adjusting Screw . . . . Bracket . . . . Hinge Fin . . . . Locking Screw . . . . Arm and Bracket complete, Nos. l90J, 879D, 25788, 25790 and 25791 . . . . Feed Dog, 13 teeth {12 teeth to the
inch) ~or use with 12442 ... , ... . Presser Foot . . . . Throat PJRt.e, small needle hole, for use with 12372 . . . . Corder complete, Nos. 135D, 12372,
l2442XC, 25792 and 25984 . . . . Corder Screw . . . • .
CORDER !=OR TOP AND BOTTOM CORDING
THIS CORDI:R IS THt SAM!: AS 26328 WITH THt FOLLOWING I:XCI:PTIONS:
Plate 22930
22930
Name
Feed Dog, 13 teeth {14 teeth to the inch) Cor use with 28630, in place or 12372 . . . . Presser Foot, in place of 25984 . . . . .
CORDI:RS 2 7
No. Plate
28630XC 22930
NRme
Throat Plate Cor use with 28629, in place of 12442 . . . . 28788 2?.930 Corder complete, Nos. l35D, 25792,
26167, 28629 and 28630XC . . . .
CORDtR (Bow) !=OR TOP CORDING
No.
26649
No.
35026 35027 35028 35029XC 35030
No.
28649 28709 28735 28767
28753 35175 12450
35176 12464XC l245lXC 36292 28972 35610 940F 289'/3 51224W
Plate 22929
Name
Corder {bow) complete . . . .
CORDI:R !=OR mGE CORDING PLUSI-l
Plate 22930 22 930 22960 2?.930
?2930
Plate 22929 22929 22930 22930
22930 22931 22931
22931
22931 24332 24332 243:'>2 24332 24332 24332
Name
Corder on Shank . . . , . Feed Dog, 15 teeth {14 teeth to the
inch) for use with 35029 . . . . Presser Foot . . . . Throat Plate ror use with 35027 . . . . . Corder complete, Nos. 35026 to
35029XC . . . .
~06~ FOLD~RS
Name
Edge Folder on Shank . . . . {double) on Shflnk, for canvas . . . . Edge Folder on Shank, for seaming
umbrellas . . . . Edge Folder {double) on Shank, the
under fold to extend l/16 in.
beyond edge of the upper fold ...
Edge Folder and Guide on Shank, for top fold only . . . . Edge Folder on Shank . . . . Feed Dog, l l teeth {JB teeth to the
inch) ror use with 12451, 12464 and 35175 . . . . Presser Foot for use with 35175 . . . . . Throat Plate, large needle hole, for use with 12450 . . . ..
Throat Plate, siAAll needle hole, for use with 12450 . . . ..
Edge Folder {double) . . . . Holder . . . . Friction WRsher ..
Hinge Screw . . . . Shank . . . . Thumb Screw . . . .
28
No.
7071 36293
44252
36294 44256XC
No.
26803 220J 121146 12114 7 26805' '\
207F 2362 26806 207F 233J 26807
94D 51916 51917 26808 26809 12152 26810
121148
l90J
No.
36185 36186 1425D 1988
Plate 24332 24332
24332
243;',2 24332
Plate 2293;', 229:03 22933 22933 22933 22933 2293:') 22933 22933 22933 22933 22933 22933 22933 22933 22933 22933 22933
22933
22933
Plate 22932 22932 22932 22932
I:DGE FOLDERS
Name
Edge Folder Thumb Screw Washer . . . . Edge Folder (double) hinged (adjust- able) complete, Nos. 940F, 7071, 28972, 28973, 35610, 36292 and 51224W . . . . Feed Dog, 12 teeth (12 teeth to the
inch) for general work f'or use with 36293 and 44256 . . . . Presser Foot for use with 36293 . . . . . Throat Plate for use with 44252 . . . . .
I:DGI: GUIDI: (Roller)
NRme
Bed wlth 2362 . . . . Leveling Screw ( 4) . . . . Slide with 26809, 51916 and two
12152 . . . " . "
Slide with 26809, 51917 11nd two 12152 . . . . Slide Cap (left J ••••••••••••••••••••
Screw . . . . Steady Pin . . . . (right) . . . . Screw (largo) . . . . . (small) . . . . . Lever . . . . Hinge Screw . . . . Roller and Screw Stud . . . .
Cone and Screw Stud ... . Slide Spring . . . . Cover . . . . Rivet(£') . . . . ,. ..
Edge Guide (roller) complALe, Nos.
94D, 233J, 26803, 26805 to 26808, 121146, two 20/F and four 220J . . . . Edge Guide (cone shaped roller) com-
plete, Nos. 94D, 2:S3J, 2680::\, 26805 to 26808, 121147, two 207F and four 220J . . . . Edge Guide Screw . . . .
mGt GUIDt (Roller)
FOR GLOVE WORK
Name
Arm with 1988 . . . . Friction Washer . . . . Hinge Screw . . . . Roller and Screw Stud . . . .
EDGE GUIDE 2 9
No. Plate Name
36187 229::\2 Bed with four 465F . . . . 465F 22932 Leveling Screw (4) . . . . 36183 22932 Edge Guide (roller) Gomplete, Nos.
1425D and 36185 to 36187 . . . .
FACI: PLA Tl: TI-l RI:AD LUBRICATOR
No.
62819 143353
143355 17822 8068 124371 62827 143356
143357 1432 64 140050J
Plate 23280 23280
23280
23280 2 :<280 2:'1280
Name
Face Plote Thread Lubricator Oil Pad (felt J ••••••••••••••••••••• • • • • • Face Plate Thread Lubricator Oil Pad Holder . . . . Face Plate Thread Lubricator Oil Pad Holder 143353 with 62819, 62827 and 143355 . . . . Face Plate Thread Lubricator Oil Pad
Retainer . . . . Face Plate Thread Lubricator Oil
Reservoir Rivet . . . . Face Plate Thread Lubricator Oil
Reservoir Rivet Washer (inside).
Face Plate Thread Lubricator Oil Reservoir Rivet Washer (outside) Face Plate Thread Lubricator Oil
Wick . . . . Face Plate Thread Lubricator com-
plete, Nos. 8068, 17822, 124371 and 143354 . . . . Face Plate Thread Lubricator 143356
with 140050J and 143264 . . . . Face Plate Thread Lubricator Adaptor
Screw ..
FEI:D DOGS AND TI-IROAT PLA TI:S
No. Pl11te 26603 22951 26605XC 22951 19474 24333
l9475XC 24333 24572XC 36906XC 24333 121446 22951
Name
Feed Dog, 20 tee.th ( 16 teeth to tre inch) for use with 26605 . . . . Throat Plate, large needle hole, for use with 26603 . . . · ' . . . . Feed Dog, 14 teeth (16 teeth to the
inch) for use with 19475, 24572 and 36906 . . . . Throat Plate, large needle hole, for use with 194 74 . . . ..
Throat Plate, small needle hole, for use with 19474 . . . • . . Throat Plate, with under guide, for
rick rack for use with 19474 . . . . Feed Dog (spiked teeth) 13 teeth (10 teeth to the inch) for use with 127306 and 127307 . . . .
30 FH::D DOGS AND THROAT PLATES
No.
l27306XC 12 7307XC 121444 121445XC 121397 121398XC
43525 12468
139616XC Plate 22951
22951 22951 22951 22951 22951 22951
139617XC 22951 44156 22951
19ll8XC 22951 19419XC
No.
121326 36819 36820 196J 50316J 121327
No.
120857 120858 50302J
236J 120860
Plate 22931 22931 22931 22931 22931 22931
Plate 22931 22931 22931 22931 22931
Name
Throat Plate, large needle hole, for use with 121446 . . . . Throat Plate, small needle hole, for use with 121446 . . . . Feed Dog, 13 teeth (16 Leeth to the
inch) for use with 121445 . . . . Throat Plate for use with 121444 ... . Feed Dog, 18 teeth ( 16 teeth to t.re
inch) for use with 121398 . . . . , ..
Throat Plate with 43525, for use with 121397 . . . . Throat Plate Stud for 121398 . . . . Feed Dog, 16 teeth (16 teeth to the
inch) beveled for hemmer for shirt work for use with 1~9616
and 139617 . . . . Throat Plate, large needle hole, for use with 12468 . . . . Throat Plate, small needle hole, for
use with,l2468 . . . . Feed Dog, 24 teeth (24 teeth to the
inch) for silk, for use with 19418 and 19419 . . . . Throat Plate, large needle hole, for use with 44156 . . . . Throat Plate, small needle hole, for use with 44156 . . . ..
FINGER GUARDS
FINGER GUARD
(Me~al) NameFinger Guard • . . . Friction Washer . . . . Holder with 196J . . . . Set Screw . . . . Screw . . . . Finger Guard (metal) complete, Nos.
36819, 36820, 50316J and 121326.
FINGER GUARD (Wire)
Name
Finger Guard . . . • . . . • Holder with 50302J . . . Set Screw ..•.•..
Screw (2) . . • • . . . • Finger Guard (wire) complete, Nos.
120857, 120858 and two 236J . . .
~o.
35190 35866 25874 25873 28658 1852 284W 732W 3146 28971 28972 35610 940J 12 042 7
51224W 7071 120428
31
GUID~S (Miscellaneous)
Plate 22932 22932 22932 22 932 22932 22932 22 932 22 932 22932 22933 22933 22933 22933 22933 22933 22933 22933
Name
Guide . . . .
" for flush throat plate . . . . for raised throat plate . . . . (combination) . . . . (roller) with 1852 . . . . Roller for 28658 . . . . Thumb Screw (long) . . . . (short) . . . • . Washer (2) ••••••••
Guide . . . • . . . • . . . ,.
" Holder . . . . Friction Washer . . . . Hinge Screw . . . . Shank . . . . Thumb Screw . . . , . Washer . . . . Guide (adjustable, hinged) complete,
Nos. 940J, 7071, 28971, 28972, 35610, 51224W and 120427 . . . .
HEMMERS
1-l~MM~R
WITH LEVER FOR OPENING THE FOLDER AND RELI:ASING TI-lE 1-lEM, SO THAT IT CAN BE FINISHED WITHOUT
REMOVING THE HEMMER FROM MACHINE.
No.
28679 233J 2362 28685 94D 2362 28682 28683 28684 207F 233J 28686 28687 12152 28688
FOR SKIRTS, OVERALLS, OR SIMILAR CLOSED ARTICLES Plate
22934 22934 22934 22934 22934 22934 22934 22934 22934 22934 22 934 22934 22934 22934 22934
Name
Hemmer Bed . . • . . . Hemmer Folder (left) Screw . . . .
Steady Pin . . . . . Disengaging Lever . . . . .
"
Hinge Screw . . . . Hemmer Folder Disengaging Lever Stop
Pin . . . . Hemmer Slide with 28687 and two each
2362 and 12152 . . . . Hemmer Slide Cap (left) . . . .
" (right) . . . . Screw (back) (2) .. . (front) (2) ..
Spring . . . . Cover . . . • .
Rivet (2).
Hemmer complete, Nos. 94D, 28679, 28682 to 28686, two 207F and three 233J . . . .
\ 32
No.
190J 18055 28689 28690 26231 28691
No.
120938 120803 120804 120805 36122 120806 120807 35710
35682
36524
35997
36309
36072
120898 120911 36413 36414 36480 36416 120837
Plate 22934 22934 22934 22934 22934 22934
Plate 22934 22934 22934 22934 22935 22935 22935 22935
22935
22935
22935
22935
22935
22935 22935 22935 22935 22935 22935 22935
HEMMERS Name
Hemmer Screw . . . . Presser Foot Hinge Pin . . . . Plate . . . . Shank . . . . Spring . . . . Presser Foot (spring hinged) com-
plete, Nos. 18055, 26231, 28689 and 28690 . . . .
~I:MMERS
(Foot)
Name
Hemmer (foot) for 3/32 in. hem . . . . ..
1/8 in. hem . . . . 5/32 in. hem . . . . 3/16 in. hem . . . . 7/32 in. hem . . . . l/4 in. hem . . . . 5/16 in. hem . . . .
~/32 in. hem with guide on bottom to the right of needle hole . . . . Hemmer (foot) for 1/8 in. hem with
guide on bottom to tho right of needle hole . . . . Hemmer (foot) for 5/32 in. hem with
guide on bottom to the right of needle hole . . . . Hemmer (foot) for 3/16 in. hem with
guide on bottom to the right of needle hole . . . . Hemmer (foot) for 7/32 in. hem with
guide on bottom to the right of need] e hole . . . . Hemmer (foot) for l/4 in. hem with
guide on bottom to the right of needle hole . . . • . . Hemmer (foot) for 1/16 in. to 1/8
in. hem, for China silk, etc . . . . Hemmer (foot) for 5/32 ln. to 1/4
ln. hem, for China silk, etc ...•
Hemmer (foot) plain bottom, 1/16 in.
hem . . . . Hemmer (foot) plain bottom, 3/32 ln.
hem . . . • . . . Hemmer (foot) plain bottom, 5/32 ln.
hem . . . . • . . . Hemmer' (foot) plain bottom, 3/16 ln.
hem . . . • . . . Hemmer (foot) plain bottom, 1/8 ln.
hem, slotted for lace . . . .
No. Plate 12450 22 936
26656 22936 12464XC 12451XC 26655 26660 26662 26664 26666 26935 28948 36521 36712 28623
<'8624
28627 28628 28650 28651 28652 28653 28700 28701
36589 28710 120337
28711 28719 28720 120338
22936 22936 22 936 22936 22936 22936 22 936 22 936
?2937
?2931
;:2937
?.?. 937
22940 22940 22 938 22939 22938 22 938 22940 22940
22940 22938 22938
22938 22938 22938 22941
H(;MM(;RS 33
~I:MMI:RS
ON
S~ANKName
Feed Dog, 11 teeth (18 teeth to the inch) for use with 12451, 12464 and 26655 . . . . Presser Foot for use with 26655 . . . . . Throat Plate, large needle hole, for
uae with 12450 . . . . Throat Plate, small needle hole, for use with 12450 . . . . Hemmer on Shank for 3/32 in. hem ... .
3/32 in. hem, for umbrella work . . . . Hemmer on Shank (wide ) . . . . for raw edge silk .. . l/8 in. hem ... ..
(narrow) . . . . for one fold, with right hand lower guide, for lace Hemmer on Shank for I/4 in. hem . . . l/4 in. hem, for umbrella work . . . . Hemmer and Corder on Shank, to take
goods from above to cord bottom.
Presser Foot with groove on bottom to the right of needle hole, for use with 28623 . . . ..
Hemmer on Shank, for I/8 in. to 5/8 in. gauges for Marseilles quilts Presser Foot for use with 28627 . . . Hemmer on Shank, for hemming heavy
Canton flannel . . . . Hemmer on Shank, for turning tops
and bottoms of canvas leggings ..
Hemmer on Shank, ror l 9/16 in. to 2 in. hem . . . . Hemmer on Shank, for 2 9/16 in. to 3 in. hem . . . . Hemmer (short head) on Shank, for
hemming stable blankets . . . . Presser Foot (tube) for laying braid on stable blankets, ror use with 28700 . . . . Presser Foot for use with 28700 . . . . . Hemmer on Shank, for l/8 in. hem ... . l/8 in. to 3/8 in. hem, for bottom or >Jhirt waists . . • . . . Hemmer on Shank, for I/B in. to 1/2
in. hem, for hemming towels . . . Hemmer on Shank, for l/4 ln. to l/2
in. hem . . . . Hemmer on Shank, for 3/4 in. to 1
in. hem . . . • . Hemmer for 120340 . . . · .. ..
34 No.
120339 l443J 120340
28721 36776 28722 28723
120367 28736 28737 28738 28739
\ 28935 35022
354 75
35023
120452 35064 35104
35063 35832 35166 28614 120289 194 74
35063
Plate 22941 22941 22941
22939 22941 22939 22939
22939 22942 22939 22942 22941
22941 22937
22937
22937
22939 22941 22939
22939 22939 22942 22942 22942 22942
22942
1-lEMMERS Name
Hemmer Shank for 120340 . . . . Screw ( 2) . . . . Hemmer on Shank complete, for 1/2
in. to 2 in. hem, Nos. 120338, 120339 and two 1443J . . . . Hemmer on Shank, for l l/4 in. to 2
in. hem . . . . Hemmer on Shank, for 2 l/4 in. to 3
in. hem . . . . Hemmer on Shank, for heavy woven
goods . . . . Hemmer on Shank, with guide, for
hemming and stitching on lace in one operation . . . . Hemmer on Shank, for handkerchief
work . . . . Hemmer on Shank, for umbrella work ..
'' '' '' soft material to turn the hem under . . . . Hemmer on Shank, 3/8 in. hem, to
turn the hem under . . . . Hemmer on Shank, 3 in. hem, for
sheets and pillow slips, to turn the hem under . . . . Hemmer on Shank for bobbinette ma-
terial, to turn the hem under ...
Hemmer on Shank, for 1/16 in. hem, with right hand lower guide for lace . . . . • . . . • . Hemmer on Shank, for 5/32 in. hem,
with right hand lower guide for lace . . . • . . Hemmer on Shank, for 1/16 in. hem,
with left hand lower guide for lace . . . • . . . • . . . Hemmer on Shank, for 1/~2 in. to 1/8 in. hem, for Windsor ties . . . . Hemmer on Shank, for l in. to 2 in.
hem, for general work . . . . Hemmer on Shank, for bottom of shirt
waists, for inserting drawing or shirring string . . . . Presser Foot, for light work, for
use with 35104 . . . . Presser Foot, for heavy work, for
use with 35104 . . . . Hemmer on Shank, for J in. hem, to
turn the goods under . . . . Presser Foot for use with 35166 . . . . . Hemmer on Shank, for 2 in. hem, to
turn the goods under . . . • Feed Dog, 14 teeth (16 teeth to the
inch) for use with 19475 and 35236 . . . • . . . Presser Foot for light work for use
with 35236 . . . .
No.
194 75X:
35236 194 74
35066 72 98 120143 19335 120144
194 75X:
35241 26603
35066 26605X;
35863 35679 35353 l425B 36006 35681
No.
28671
No.
144810 144811 158R 143104 144812 143242
Plate 22942 22942 22943
22943 22943 22943 22943 22943
22943 22943 22943
22943 22943 22943 22940 22940 22940 22940 22940
Plate 22934
Plate 24330 24330
243~0
24330
24330
H!=:MM!=:RS 35
Name
Throat Plate, large needle hole, for use with 194 74 . . . ..
Hemmer on Shank, for 7/16 in. hem .. . Feed Dog, 14 teeth (16 teeth to the
inch) for use with 19475 and 35241 . . . . Presser Foot for use with 35241 . . . . . Hinge Pin . . . . Plate . . . . Shank . . . . Presser Foot (hinged) complete, for
use with 35241, Nos. 7298, 19335 and 120143 . . . . Throat Plate, large needle hole, for use with 19474 . . . . Hemmer on Shank, for Canton flannel
etc . . . · · ·
~'eed Dog, 20 teeth (16 teeth to the inch) for use with 26605, 35681 and 35863 . . . . Presser Foot for use with 35681 and
35863 . . . . Throat Plate, large needle hole, for use with 26603 . . . . Hemmer on Shank, for canvas work ... . Folder on Shank for 35681 ... . Hinge Plate for 356111 . Screw for 35681.
Washer for 35681 . . . • . . . • . . . Hemmer on Shank (hinged) complete,
for mattress work, Nos . .l425B, 35353, 35679 and 36006 . . . .
HEMSTITCHER
Name
Hemstitcher . . . .
KNEE LIFTERS
KN~~ LIFT~R FOR POWER TABLE
Name
Bell Crank . . . • . . . Bracket . . . .
Screw (2) . . • . . . Hinge Pin . . . . Bell Crank complete, Nos. 143104,
144810 and 144811 . . . • . . . Lifting Lever with 448AL • . • . . .
