Form i737w# Revised ( 141 )
Printed In U. S. A.
LIST
OF
PARTS
SINGER"
MACHINES
Nos. 114 w103 and Il4w 104
INSTRUCTIONS FOR OILING
To ensure easy running and prevent unnecessary wear of the parts which are in movable contact, the machine requires oiling and when in continuous use, "TYPE B"
or "TYPE D" OIL, sold only by Singer Sewing Machine Company, should be applied at least twice each day to all oil holes marked "OIL", as instructed in Form I594w.
"TYPE D" OIL is stainless.
Copyright, U. S. A., 1917, 1939 and 1941 by The Singer Manufacturing Co.
All Rights Reserved for All Countries
INDEX
Page
Accessories 15
Machine No.ll4wl03 5
Machine No.lUwl04 12
Nipples 14
* ' Numerical List of Parts 17
Obsolete Parts ^5
Presser Feet 14
INSTRUCTIONS FOR ORDERING
In ordering from this list, use CM,Y the PART number in the FIRST column.
The number stamped on a Sewing Pfechlne Part Is the num ber of the Single Part only, except when the part Includes Set Screws, Clamping Screws, Studs and Rollers Spun on.
Small Wires riveted, or Parts soldered together, etc.,which It la necessary to furnish In combination.
Every combination of parts sent out has its specific number which, although not stamped on Parts (except In above case), must be used when ordering the combination.
Each number always indicates the SAME PART in whatever list It appears, or for whatever Machine.
The letters after some of the numbers Indicate the style of finish only, as follows:
A. Hardened, Polished, Nickel Plated and Buffed.
B. Polished, Nickel Plated and Buffed.
C. Hardened only.
D. Polished only.
E. Soft, not polished.
F. Hardened and Polished.
H. Blued.
J, Nickel Plated only, R, Merllzed.
X, Black Oxide.
XC. Hardened and Black Oxide, Y. Blade Nickel only.
These letters MUST BE USED when they appear in the list and AFTER the number, as in the list.
In this series:
200001 to 201500 and 350001 to 351500 are Screw Numbers.
201501 to 201800 and 351501 to 351800 are Nut Numbers, 201801 to 202000 and 351801 to 352000 are Roller Numbers.
202001 to 350000 are Numbers of Machine Parts.
The figures In the second column refer only to the plate in which the Illustration of the part is shown and are NOT TO BE USED In ordering.
Two or more numbers over a cut indicate that the dif ference between such parts is not visible in an illustra tion.
n
LIST OF PARTS COMPLETE
FOR
MACHINE No. Il4wl03
For Making Chain and Drop or Moss Stitch Embroidery; also for Writing Names on
Linen and Towels for Hotels, etc.
No. Plate ^^In9
•222561 Am with 2010488,222645 and two 222649 12967 n Itead with 222404
222648 12968 n 11 Cover
200469B 12968 u " Ihumb Screw 222404 12968 n II Position Pin 201042D 12967 n ir Screw (lower)
350169E 12967 11 It " (upper) (long)
200011D 12967 R n " (short)
222405 12967 M R Sleeve 222407 12967 n rt " Cap
200097C 12967 n n " " Screw
222408 12967 n n " Gear with 2010520 201052C 12967 H It " " Set Screw
PARTS FOR MACHINE No. IIAwl03
No. Plate 222654 12967
222657 200029E 222606 222655 200382C 222412
201032F 200098F 222645 201048B
♦222623 222565 222416 350419H 222417 222650 200403C 201864 201035F 222595 222418 222419 222420 222421 222422
222423 222424 200S81H 200125F 200389C 222425 222426 222427 201051D 201187F 201621C
12968 12968 12963 12963 12963 12963
12963 12963 12968 12968
12963 12963 12963 12967 12967 12967 12967 12967 12967 12967 12967 12967 12967 12967
12967 12967 12967 12967 12967 12967 12967 12967 12967 12967 12967
Name
Arm Head complete,Nos.200072F,200145C, 2003340, 200943F,2011B5D,201187F, 2011890,2016210,222405,222407,222408, 222417 to 222419,222422,222423,222425 to 222427,222432,222452,222453,222467, 222482,222566,222576,222578 to 222584, 222586,222595,222598,222636 to 222638, 222649,222650,222653,231827,350078D, 350088D,two each 2000970,201051D, 201191F,222531 and three 2004030 Arm Position Pin (2)
" Screw (4)
" Shaft
" " Collar with two 200382C
" " " Set Screw
" " Driving Flange with 200098F and 201032F
Arm Shaft Driving Flange Position Screw
" " " " Set Screw
" Side Cover
" " " Thumb Screw Bed
Driving Pulley
" " Sleeve
" " " Screw
Feed Bell Crank with 20103SF and 201864
" " " Hinge Stud
" " I. II II gg^. Screw
" • " Roller
" " H I .
" " " Spring
" Lever
" " Bracket with 200125F and 2003890
" " " Qulde
" " " " Bearing
1 " 222421 with
222420,222424 and two 200581H Feed Lever Bracket Guide Bearing Pin
" « " " Cap
If II • n II Screw
" " " Set Screw
n n n a n
" " Hinge Pin
" Recovering Spring (left)
" " " (right) n " " Screw
" Regulating Screw with 222563
n " " Lock Lever Nut
PARTS FOR MACHINE No. Il4wt03 No. Plate
222563 12967 222428 12964
200119F 12964
*222651
222653 12967
*222652 -
203325 12967 222566 12967 222432 12967 222433 12965 222434 12965 222404 12965 201058E 12965 222435 12965
222436 12965 222437 12965
202004 12965
201058E 12965
222639 12965
222438 12965 201057C 12965
201047C 12965 201622C 12965'
222439 12963 222526 12963 222640 32965 35009X 12965
•222619 222621 12965
222622 12965
*222620 2269 12965
197D 12965
Name
Feed Regulating Screw Packing (fiber)
" Rotating Gear (upper) (rear) with
200119F
Feed Rotating Gear (upper) (rear) Set
Screw
Feed Rotating Shaft
" " " 222651 with 2CS325 and 222652
Feed Rotating Shaft Gear
" " - " Position Pin
" Slide Bar
" " Block Looper
" Bracket
" " Position Pin (2)
" " Screw (2)
" operating Bell Crank with two
201057C
Looper Operating Bell Crank Bracket
„ „ ,, I. " 222436
with 222596 and 222624
Looper Operating Bell Crank Bracket Posi
tion Pin (2)
Looper Operating Bell Crank Bracket
Screw (3)
Looper operating Bell Crank Bracket com- plete,Nos.201047C,201622C,222437,222445
222622,222644 and two 222438
Looper Operating Bell Crank Hinge Block
Screw Stud
Looper Operating Bell Crank Hinge Screw
Nut
" " Can
•• " " Position Pin
•I " Collar with 350099C II " " Set Screw
" " Connection (cam end)
II " 222619 with 222620 and two 197D
Looper Operating Connection 222621 with 222435,222442 and two 205510
Looper Operating Connection (swivel end)
Position Pin , ,
Looper Operating Connection (swivel end)
Screw
PARTS FOR MACHINE No. Il4wl03
No.
222442 205510
Plate 12965 12965
222641 12965 222642 12965
222643 222644 222445
12965 12965 12965
201052C 12965
222624 222447 222596
12965 12965 12965
200119F 12965
222448 200099H 222607 200444C 201853 222608 222451 222452 201053F 222453 222574 201049D 222458 222636 222467 222531 200403C 222637 222576 200097C 201189C 222598 222638 350088D
222602 222473 201053F 222578 222579
12965 12965 12963 12963 12963 12963 12967 12967 12967 12967 12965 12965 12969 12967 12967 12967 12967 12967 12967 12967 12967 12967 12967 12967
12969 12969 12969 12967 12967
Name
Looper Operating Connection Swivel
" " " " Hinge
Pin
Looper Operating Gear (spiral)
" " " 222641 with 222640 and 222643
Looper Operating Gear Spring
" " Shaft
" " " Guide Block with 201052C
Looper Operating Shaft Guide Block Set Screw
Looper Operating Shaft Sleeve and Gear
" " " " Gear
" " " (hack) 222447 with 200119F
Looper Operating Shaft Sleeve Gear Set Screw
Looper Position Plate
" " " Screw
Needle Driving Cam with 200444C and 222608
" " " Position Screw
" " " Roller
" stud
" Holder
" " Clamping Sleeve with 201053F
" " " " Thumb Screw
" Operating Slide
" Plate,for needle sizes 1 to 12
" " Clamping Thumb Screw Nipple,for No.4 needle
" Carrier
" " Bell Crank
" " Hinge Stud
« Set Screw
" " Extension
" " Guide
" " " Screw
" " Lifting Screw Stud
" Oiling Wick
" " Spring
" " Thumb Screw (pressure regu lating)
Presaer Foot with 222529
" " Clamp with 201053F
" " " Thumb Screw
" Lever
" " " Swivel
PARTS FOR MACHINE No. Il4wl03
No.
201191F 2O1105D 222580 200943F 222404 222529 222581 200072F 222582 200334C 222563 222584 231827 222586 200145C 3S0078D
222482 222531 2004CSC
222485 201058E 201036E 222590
Plate 12967 12967 12967 12967 12967 12969 12967 12967 12967 12967 12967 12967 12967 12967 12967 12967
12967 12967 12967
12966 12966 12966 12966
222487 12966 222488 12966 201054C 12966 201CS5F 12966 222631 12966 201033D 12966
222490 222625 222492 200110D 12964 222493 12964 222494 12964
200119F 12964 222428 12964
200119F 12964 222495 12966 202004
12966 12964 12964
12966
Name
ft*esser Foot Lever Swivel Hinge Screw (2)
" " " " Stop Screw
" " Lifter
" " " Hinge Screw
" " " Stop Pin
" " Shoe (rubber)
" " Slide Bar
" n B It Adjusting Screw
" n II " Qul(Jg
" " • " " Set Screw
" " " " Oiling Wick
n It n H Spring
" It « II II Plunger
1 It « II II stop
•I II 0 II II M screy
" B t II ijjjmQt, Screw
(pressure regulating) Presser Foot Slide Bell Crank
Hinge Stud
n n n B ii n n
Set Screw
Spool Holder and Tension Bracket
II II n " '• Screw (2)
* Screw Stud
Spool Holder and Tension Bracket complete,
Nos. 200132E, 200281D, 201CIS6E, 201CS9E, 201040D,202248,222485,222588,222591,222626 and 222627
Starting Trip Lever with 201054C
" " " Block
I B B II Stud
" " " Hinge Screw
" " " (intermediate)
n II 11 " Hinge
Screw Stud
Starting Trip Lever Rod
" " " Slide
• B n B
B B B B B g(jj.Qy
B B B II Spring
Stitch Rotating Gear (lower) (for verti
cal shaft) with 200119F
Stitch Rotating Gear (lower) Set Screw
B " " (upper) (for verticalshaft)wlth 200119P
Stitch Rotating Gear (upper) Set Screw
" " " Bracket
B n B II Position Pin
10 PARTS FOR MACHINE No. ltAwl03 No. Plate
201058E 12966 222496 12966
222420 12966
200119r 12966
222535 12966
222497 222498 222503
222499 222500 222501
12964 12966 12966
12966 12966 12966
206134 12966
200084F 12966 222504 12966 222447
222596 12966 12966
200119F 12966
222539 222656 222613 222541
12964 12964 12964 12964 200076D 12964
222538 12964 350175E 12964 222614 12964
222628 222629 222594 201216C 201863 20105QC 222511 2Ce244 200393C
12963 12963 12964 12964 12964 12964 12963 12963 12963
Name
Stitch Rotating Oear Bracket Screw (2)
" " " Shaft (inter mediate)
Stitch Rotating Oear Bracket Shaft (Inter mediate) Gear (back or front) with
200119F
Stitch Rotating Gear Bracket Shaft (Inter mediate) Gear Set Screw
Stitch Rotating Gear Bracket complete,Nos.
201033D,222490,222495,222496,222503, 222504,222596,222631 and tv» 222428 Stitch Rotating Gear Shaft (vertical)
" " H^d Lever with 200084F
" " " " 222498 With 201035F,222487,222488 and 222501 Stitch Rotating Ifand Lever Handle (wood)
" M n n n siggyg
It II n II II n
222500 with 206134 and 222499 Stitch Rotating Hand Lever Ifendle Sleeve
Washer
Stitch Rotating Ifend Lever Set Screw
" « .1 n
n n It II 11
It n It II n n £22447
With 200119F
Stitch Rotating Hand Lever Shaft Gear Set
Screw Stop Bracket
" " Interlocking Rod
" " " " Spring
" " " " Stop Block
It R "I II II II
Screw
Stop Bracket Position Pin (2)
" " Screw (2)
Stop Bracket complete,Nos.200076D,200110D,
201216C,201863,222492,222493,222539, 222541,222594,222613,222625 and 222656 Stop Cam with 222629" " Driving Stud
" " Locking Lever with 201053!
" " " " Hinge Screw
" " Roller
" " " Screw Stud
" Spring
" " " Collar with two 200395C
" " " " Set Screw
V '
No.
222626 200281D 202248
222627 201040D 222591 2010S9E 222588 200132E
PARTS FOR MACHINE No. i:4wl03
Name
Tension Regulating Lever
Hinge Screw 11
Plate 12966 12966 12966
12966 12966 12966 12966 12966 12966
Spring Washer
Tension Regulating Plate
" " " Hinge Screw
" " Spring
" " " Screw Stud Thread Controller Spring (light)
" " " Screw
12
MACHINE No. Il4wl04
For Making Chain and Drop or Moss Stitch Embroidery on Heavy Material; Writing
Names on Army Blankets, etc.
The same as Machine No.ll4wlC)3 with the following exceptions:
No.
222618 222610
222463 222601 222612
222630 222616 244048 202407 201312F 201528F 201572B 222617
Plate 12971 12971
12973 12973 12972
12971 12971 12972 12972 12972 12972 12972 12972
222515 12972
Name
Arm Shaft,In place of 222606 Needle Driving Cam with 2004440 and
222608,In place of 222607
Nipple,for No.9 needle,In place of 222458 Presser Foot (spur)
Spool Holder and Tension Bracket complete, NOS.200132E,200281D,201039E,201040D, 202248,222485,222515,222591,222617, 222626 and 222627,In place Of 222590 Stop Cam with 222629,In place of 222628
" " Spring,In place of 222511
Tension Disc
" Spring
" Stud
" Nut
" Thumb Nut
Tension complete,Nos,201312F,201528F, 2015728,202407 and two 244048 Thread Controller Spring,In place of
222588
ACCESSORIES
PARTS FOR MACHINE No. Il4wl03
No. Plate Name
222517 12970 Cleaning Wire
137 X 1 12969 Needles,one each sizes 2,6,three i sizes 3,4 and 5
222455 12969 Nipple,for No.l needle 222456 12969 " " 2 needle 222457 12969 " " • 3 needle 222459 12969 " " " 5 needle 222460 12969 " " • 6 needle 222516 12970 " Wrench
222601 12969 Presser Foot (spur)
222529 12970 " " Shoe (rubber) (6)
222520 12970 Spool Winder Spindle
222521 12970 " Washer
222516 12970 Thread Knife 222519 12970 Threader Wire
201219E 12970 Bed Clamping Thumb Screw (2)
12361 12970 Machine Hinge Connection (2)
41564 12970 " Rest Pin (wood) 120341 12970 TV/eezers (curved)
120342 12970 Oiler (copper plated) with 12CS43
120343 12970 " Spout,3-1/2 In.long
26346 12970 Plyers
225496 12970 Screw Driver (7-1/4 In.long)
11831 12970 n rt 222523 12970 Spool (6)
PARTS FOR MACHINE No. M-lfwIOA
13
Same 137 X 1
as 114wl03 with the following exceptions:
12973 Needles,one size 9,two each sizes 7,8,10, 11 and 12,in place of sizes 2,3,4,5 and
6
Nipple,for No.7 needle,In place of 222455
" " " 8 needle,In place of 222456
" " " 10 needle,In place of 222457
" " " 11 needle,In place of 222459
" " " 12 needle,In place of 222460 Presser Foot with 222529,In place of
222601
Spool Screw Stud Screw l^e (3)
222461 12973 222462 12973 222464 12973 222528 12973 222465 12973 222602 12973
201036E 12973 23551 12973
14
NIPPLES
No, Plate Nasie
22S455 12969 Nipple,for No.l needle 222456 12969 " " " 2 needle 222457 12969 " " " 3 needle 222458 12969 " " " 4 needle 222459 12969 " " " 5 needle 222460 12969 " " " 6 needle 222461 12969 " • " 7 needle 222462 12969 " " " 8 needle 222463 12969 " " " 9 needle 222464 12969 " " "10 needle 222528 12969 " " "11 needle 222465 12969 " " "12 needle
222472 222602
222522 222601 222479 222529
12969 12969
12969 12969 12969 12969
PRESSER FEET
Presser Foot with 222479
" " " 222529, for einbroldery
work
Presser Foot (spur)
" " " for entbroidery work
" " Shoe (rubber)
15
OBSOLETE PARTS
No. Plate Name
222562 —— Arm Head with 222404 222413 " Side Cover
222411 " Shaft
222429 Feed Rotating Shaft
222430 — " " " Qsar with two 200691F 222567 Looper Adjusting Sleeve
222568 " " " Guide with 2011880
222569 " " " Spring
222570 " " " " Stop 222443 " Operating Gear (spiral) with 200119F 222573 " " Shaft Guide Block with
201190F and 201534E
222449 Needle Driving Cam with 200444C and 222450 222450 " " " Roller Stud
222577 Nipple Carrier Sprlng,for Machine No.
114W103
222611 Nipple Carrier Sprlng,for Machine No.
114wl04
201196D Nipple Carrier Thumb Screw (pressure regu
lating)
222585 — - Presser Foot Slide Bar Spring Plunger
201195D " " " " Thumb Screw (pres
sure regulating)
222592 Stop Bracket
222509 " Cam Driving Stud
222510 " " Locking Lever with 201055C
222507 " Bracket Interlocking Rod Spring
N,''"
17
NUMERICAL LIST OF PARTS
No. Plate Name
197II 12965 Looper Operating Connection (swivel end) Scraj,for 222621
2269 12965 Looper Operating Connection (swivel end)
Position Pin 11831 12970 Screw Driver
12361 12970 Machine Hinge Connection 23551 12973 Screw Eye
26346 12970 Flyers
41564 12970 Pfachlne Rest Pin (wood) 120341 12970 IWeezers (curved)
120342 12970 Oiler (copper plated) with 120343 120343 12970 " Spout,3-1/2 ln.long,for 120342 200011D 12967 Arm Head Screw (upper) (short) 200029E 12968 " Screw
200072F 12967 Presser Foot Slide Bar Adjusting Screw, for 222654
200076D 12964 Stop Bracket Interlocking Rod Stop Block Screw,for 222614
200084F 12966 Stltch Rotating Ifend Lever Set Screw,for
222498
200097C 12967 Arm Head Sleeve Cap Screw,for 222654
200097C 12967 Nipple Carrier Guide Screw,for 222654
200098F 12963 Arm Shaft Driving Flange Set Screw,for222412
200099H 12965 Looper Position Plate Screw
200110D 12964 Starting Trip Lever Slide Cap Screw,for
222614
200119F 12964 Feed Rotating Gear (upper) (rear) Set
Screw,for 222428
Looper Operating Gear Set Screw,for 222443 12965 " " Shaft Sleeve Gear Set
Screw,for 222596
12966 Stitch Rotating Gear Bracket Shaft (inter
mediate) Gear Set Screw,for 222428
12964 Stitch Rotating Gear (Icrwer) Set Screw,for
222494
12964 Stitch Rotating Gear (upper) Set Screw,for
222428
12966 Stitch Rotating Hand Lever Shaft Gear Set
Screw,for 222596
12967 Feed Lever Bracket Set Screw,for 222419
200119F 200119F
200119F
200119P
200119F
200119F
200125F
18
No.
200132E
200145C
200281D
200334C
2CI0S82C 20aS89C 200393C
2004CSC
200403C
200403C
200444C
200469B 200581H
200691F
200943F 201032F
Plate 12966
12967
12966
12967
12963 12967 12963
12967
12967
12967
1296E
12968 12967
12967 12963
201033D 12966
201035F 201035F 2010S6E 201059E
12967 12966 12966 12966
201040D 12966
201042D 201047C
201048B 201049D 201051D 201052C 201052C
12967 12965
12968 12965 12967 12967 12965
201053F 12967
NUMERICAL LIST OF PARTS
Name
Thread Controller Spring Screw,for 222590 and 222612
Presser Foot Slide Bar Spring Stop Screw, for 222654
Tension Regulating Lever Hinge Screw,for 222590 and 222612
Presser Foot Slide Bar Guide Set Screw,for 222654
Arm Shaft Collar Set Screw,for 222655 Feed Lever Bracket Set Screw,for 222419 Stop Cam Spring Collar Set Screw,for
203244
Feed Bell Crank Hinge Stud Set Screw,for 222654
Nipple Carrier Bell Crank Hinge Stud Set Screw,for 222654
Presser Foot Slide Bell Crank Hinge Stud Set Screw,for 222654
Needle Driving Cam Position Screw,for 222449,222607 and 222610
Arm Head Cover Thumb Screw
Feed Lever Bracket Guide Cap Screw,for 222422
Feed Rotating Shaft Gear Set Screw,for
222480
Presser Foot Lifter Hinge Screw,for 222654 Arm Shaft Driving Flange Position Screw,
for 222412
Starting Trip Lever (intermediate) Hinge
Screw Stud,for 222535
Feed Bell Crank Roller Screw,for 222417 Starting Trip Lever Hinge Screw,for 222503 Spool Screw Stud,for 222590
Tension Regulating Spring Screw Stud,for
222590 and 222612
Tension Regulating Plate Hinge Screw,for
222590 and 222612 Arm Head Screw (lower)
Looper Operating Bell Crank Hinge Screw,
for 222639
Arm Side Cover Thumb Screw,for 222561 Needle Plate ClaKplng Thumb Screw Feed Recovering Spring Screw,for 222654 Arm Head Sleeve Gear Set Screw,for 222408
Looper Operating Shaft Guide Block Set
Screw,for 222445
Needle Holder Clausing Sleeve Thumb Screw,
for 222452
No. Plate 201053F 12969 201054C 12966
201055C 12964
201057C 12965
201058E 12965 201058E 12965 201058E 12966 201058E 12966 201185D 12967
201187F 12967
201188C
201189C 12967
201190F
201191F 12967
201195D
201196D
201216C 12964
201219E 12970 201312F 12972 201528F 12972 201534E
201572B 12972 201621C 12967
201622C 12965
201853 12963 201863 12964 201864 12967 202004 12965
202004 12966 202248 12966
202407 12972
NUMERICAL LIST OF PARTS 19
Presser Foot Clamp Thumb Screw,for 222473 Starting Trip Lever Block Screw Stud,for
222487
Stop Cam Roller Screw Stud,for 222510 and
222594
Looper Operating Bell Crank Hinge Block Screw Stud,for 222435
Looper Bracket Screw
" Operating Bell Crank Bracket Screw Spool Holder and Tension Bracket Screw Stitch Rotating Gear Bracket Screw Presser Foot Lever Swivel Stop Scr0w,for
222654
Feed Regulating Screw with 222563,for 222654
Looper Adjusting Sleeve Guide Set Screw,
for 222568
Nipple Carrier Lifting Screw Stud,for
222654
Looper Operating Shaft Guide Block Posi tion Screw,for 222573
Presser Foot Lever Swivel Hinge Screw,for 222654
Presser Foot Slide Bar Thumb Screw (pres
sure regulating) (obsolete)Nipple Carrier Thumb Screw (pressure regulating) (obsolete)
Stop Cam Locking Lever Hinge Screrw,for
222614
Bed Clamping Thumb Screw Tension Stud,for 222617
" " Nut, for 222617
Looper Operating Shaft Guide Block Posi
tion Screw Check Nut,for 222573 Tension Thumb Nut,for 222617Feed Regulating Screw Lock Lever Nut,for
222654
Looper Operating Bell Crank Hinge Screw
Nut,for 222639 Needle Driving Cam Roller
Stop Cam Roller,for 222614 Feed Bell Crank Roller,for 222417
Looper Operating Bell Crank Bracket Posi
tion Pin
Stitch Rotating Gear Bracket Position Pin Tension Regulating Lever Hinge Screw Spring
Washer,for 222590 and 222612
Tension Spring,for 222617
20 NUMERICAL LIST OF PARTS
No. Plate Name
203244 12963 Stop Cam Spring Collar with two 20039SC 2CS32S 12967 Feed Rotating Shaft Gear Position Pin,lor
222653
205510 12965 Looper Operating Connection Swivel Hinge Pin,for 222622
206134 12966 Stitch Rotating Hand Lever Ifendle Sleeve Washer,for 222501
222404 12968 Arm Head Position Pin,for 222561 222404 12965 Looper Bracket Position Pin
222404 12967 Presser Foot Lifter Stop Pin,for 222562 and 222649
222405 12967 Am Head Sleeve,for 222654 222407 12967 " Cap,for 222654
222400 12967 " " " Gear with 201052C,for
222654
222411 Arm Shaft (obsolete)
222412 12963 " " Driving Flange with 200098F and
201CI32F
222413 Arm Side Cover (obsolete)
222416 12963 Driving Pulley Sleeve NOS,.222417 to 222419,for 222654
222417 12967 Peed Bell Crank with 201035F and 201864 222418 12967 " Lever
222419 12967 " " Bracket with 200125F and 20CX589C 222420 12967 " " Gulde,for 222422
222421 12967 " " " " Bearing,for 222422 222422 12967 " " " " " 222421 with
222420,222424 and two 200581H,for
222654
222423 12967 Feed Lever Bracket Guide Bearing Pin,for 222654
222424 12967 Feed Lever Bracket Guide Cap,for 222422 Nos.222425 to 222427,for 222654
222425 12967 Feed Lever Hinge Pin 222426 12967 " Recovering Spring (left)
222427 12967 (right)
222428 12964 " Rotating Gear (upper) (rear) with
200119F
222428 12964 Stitch Rotating Gear (upper) (for vertical shaft) with 200119F
222428 12966 Stitch Rotating Gear Bracket Shaft (Inter mediate) Gear (back or front) with 200119F,for 222535
222429 Feed Rotating Shaft (obsolete)
222430 " " " Gear with two 200691P (obsolete)
222432 12967 Feed Slide Block,for 222654
222433 12965 Looper
" Bracket
No. Plate 222435 12965
222436 12965
222437 12965
222438 12965
222439 12963 222442 12965
222443
222445 12965
222447 12965
222447 12966
222448 12965 222449
222450
222451 12967 222452 12967
222453 12967 222455 12969 222456 12969 222457 12969 222458 12969 222459 12969 222460 12969 222461 12969 222462 12969 222463 12969 222464 12969 222465 12969 222467 12967 222472 12969 222473 12969 222479 12969 222402 12967 222485 12966
222487 12966
NUMERICAL LIST OF PARTS 21
Name
Looper Operating Bell Crank with two 201057C,for 222622
Looper Operating Bell Crank Bracket,for
222437
Looper Operating Bell Crank Bracket 222436 With 222596 and 222624,for 222639
Looper Operating Bell Crank Hinge Block, for 222639
Looper Operating Cam
" " Connection Swivel,for 222622
Looper Operating Gear (spiral) with 200119F (obsolete)
Looper Operating Shaft Guide Block with 201052C,for 222639
Looper Operating Shaft Sleeve Gear,for
222596
Stitch Rotating Hand Lever Shaft Gear,for
222596
Looper Position Plate
Needle Driving Cam with 200444C and 222450 (obsolete)
Needle Driving Cam Roller Stud,for 222449 (obsolete)
Needle Holder
" " Clamping Sleeve with 201053F,
for 222654
Needle Operating Slide,for 222654 Nipple,for No.l needle
" " 2 needle
" 3 needle
" 4 needle
" 5 needle
" 6 needle
" 7 needle
" 8 needle
" 9 needle
" 10 needle
" 12 needle
" Carrier Bell Crank,for 222654 Presser Foot with 222479
" " Clamp with 201053F
" " Shoe (rubber),for 222472
" " Slide Bell Crank,for 222654
Spool Holder and Tension Bracket,for
222590 and 222612
Starting Trip Lever with 201054C,for
22 NUMERICAL LIST OF PARTS
No. Plate Name
222488 12966 Starting Trip Lever Block,for 222503
222490 12966 " " " Rod,for 222535
222492 12964 " " " Slide Cap,for 222614
222493 12964 " >i • ti gjH.ing,for
222614
222494 12964 Stitch Rotating Gear (lower) (for verti cal shaft) with 200119F
222495 12966 Stitch Rotating Gear Bracket,for 222535 222496 12966 " " " " Shaft (inter
mediate),for 222535
222497 12964 Stitch Rotating Gear Shaft (vertical)
222498 12966 " " Hand Lever with 200084F,
for 222503
222499 12966 Stitch Rotating Ffend Lever Handle (wood).
for 222501
222500 12966 Stitch Rotating Hand Lever Ifendle Sleeve, for 222501
222501 12966 Stitch Rotating Hand Lever Handle Sleeve, 222500 with 206134 and 222499,for 222503
222503 12966 Stitch Rotating Hand Lever 222498 with 201035F,222487,222488 and 222501,for
222535
222504 12966 Stitch Rotating Hand Lever Shaft,for 222535
222507
stop Bracket Interlocking Rod Spring (ob
solete)
222509 Stop Cam Driving Stud (obsolete)
222510 " " Locking Lever with 201055c (ob solete)
222511 12963 Stop Cam Sprlng,for Machine No.ll4wlce 222515 12972 Thread Controller Spring,for 222612 222516 12970 Nipple Wrench
222517 12970 Cleaning Wire 222518 12970 Thread Knife 222519 12970 Threader Wire 222520 12970 Spool Winder Spindle
222521 12970 " " " Washer 222522 12969 Presser Foot (spur)
222523 12970 Spool
222526 12963 Looper Operating Cam Position Pin
222528 12969 Nipple,for No.11 needle
222529 12969 Presser Foot Shoe (rubber),for 222602
222531 12967
Nipple Carrier Bell Crank Hinge Stud,for
222654
222^1 12967 Presser Foot Slide Bell Crank Hinge Stud,
for 222654
V
NUMERICAL LIST OF PARTS 23
No. Plate Name
222535 12966 Stitch Rotating Gear Bracket complete,Nos.
201033D,222490,222495,222496,222503, 222504,222596,222631 and two 222428
222538 12964 Stop Bracket Position Pin 222539 12964 • " for 222614
222541 12964 " " Interlocking Rod Stop Block, for 222614
*222561 Arm with 2010488,222645 and two 222404
222562 " Head with 222404 (obsolete)
222563 12967 Feed Regulating Screw Packing (fiber),for
201187F 222565 12963 Driving Pulley-
222566 12967 Feed Slide Bar,for 222654 NOS.,222567 to 222570,(obsolete) 222567 Looper Adjusting Sleeve
222568 " " " Guide with 2011880
222569 " Spring
222570 " " " Stop
222573 " Operating Shaft Guide Block with 201190F and 201534E (obsolete)
222574 12965 Needle Plate,for needle sizes 1 to 12
222576 12967 Nipple Carrier Guide,for 222654
222577 " " Spring (obsolete),for Machine
No.114wl03
Nog.222578 to 222584,for 222654
222578 12967 Presser Foot Lever 222579 12967 " " " Swivel 222580 12967 " " Ufter 222581 12967 " • Slide Bar 222582 12967 " • " " Guide 222583 12967 " " " " Oiling Wick 222584 12967 " S S I " Spring
222585 II • II • 1 Plunger (ob
solete)
222586 12967 Presser Foot Slide Bar Spring Stop,for
222654
222588 12966
•niread Controller Spring (light),for
222590
222590 12966
Spool Holder and Tension Bracket complete Nos.200132E,200281D,201036E,201Ce9E, 201040D,202248,222485,222588,222591,
222626 and 222627,for Pfachine No.Il4wl03
222591 12966
Tension Regulating Spring,for 222590 and
222612
222592
stop Bracket (obsolete)
222594 12964
" Cam Locking Lever with 201055C,for
222614
24
No. Plate 222595 12967 222596 12965
222596 12966
222598 12967 222601 12969 222602 12969
222606 12963 222607 12963
222608 12963
Nos 222610 12971 222611
222612 12972
222613 12964
222614 12964
CO
222616 12971 222617 12972
222618 12971
*222619
•222620
222621 12965
222622 12965
•222623
222624 12965
222625 12964 222626 12966
222627 12966
NUMERICAL LIST OF PARTS
Name
Feed Bell Crank Spring,for 222654 Looper Operating Shaft Sleeve Oear {back)
222447 with 200119F,for 222437 Stitch Rotating Hand Lever Shaft Gear
222447 With 200119F,for 222535 Nipple Carrier Oiling Wlck,for 222654 Presser Foot (spur),for embroidery work
" " with 222529,for embroidery work)
Arm Shaft, for Machine No.ll4wl03
Needle Driving Cam with 200444C,and 222608 for Machine No.ll4wl03
Needle Driving Cam Roller Stud,for 222607
and 222610
.222610 to 222612,for Machine No.ll4wl04 Needle Driving Cam with 200444C and 222608 Nipple Carrier Spring (obsolete)
Spool Holder and Tension Bracket coii5)lete, Noa.200132E,200281D,201039E,20104DD, 202248,222485,222515,222591,222617, 222626 and 222627
Stop Bracket Interlocking Rod Spring,for
222614
Stop Bracket complete,Kos.200076D,200110D, 20121SC,201863,222492,222493,222539, 222541,222594,222613,222625 and 222656 ,222616 to 222618,for Machine No.ll4wl04
Stop Cam Spring
Tension complete,Nos.201312F,201528F, 2015726,202407 and two 244048,for
222612 Arm Shaft
Looper Operating Connection (cam end),for
222621
Looper Operating Connection (swivel end),
for 222621
Looper Operating Connection 222619 with 222620 and two 197D,for 222622
Looper Operating Connection 222621 with
222435,222442 and two 205510,for 222639
Bed
Looper Operating Shaft Sleeve and Gear,for
222437
Starting Trip Lever Slide,for 222614 Tension Regulating Lever,for 222590 and
222612
Tension Regulating Plate,for 222590 and
222612
No. Plate 222628 12963
222629 12963
222630 12971
222631 12966
222636 222637 222638 222639
NOS 12967 12967 12967 12965
222640 12965
222641 222642
222643 222644 222645 222648 222649 222650
•222651
•222652 222653
222654
222655 222656 222657 225498 231827
244048 350078D
12965 12965
12965 12965 12968 12968 12967 12967
12967
12967
12963 12964 12968 12970 12967
12972 12967
NUMERICAL LIST OF PARTS 25
Name
Stop Can with 222629, for >bchlne No.
114W103
Stop Cam Driving Stud,for 222628 and
222630
Stop Cam with 222629, for Machine No.
114W104
Starting Trip Lever (intermediate),for
222535
.222636 to 222638,for 222654 Nipple Carrier
" " Extension
" " Spring
Looper Operating Bell Crank Bracket coitt- plete,N08.201047C,201622C,222437, 222445,222622,222644 and two 222438 Looper Operating Collar with 350099C,for
222642
Looper Operating Gear (spiral),for 222642
" " " 222641 With 222640 and 222643
Looper Operating Gear Sprlng,for 222642
" " Shaft,for 222639 Arm Side Cover,for 222561
" Head Cover
" " with 222404,for 222654 Feed Bell Crank Hinge Stud,for 222654
" Rotating Shaft,for 222653
" " " Gear,for 222653
" " " 222651 With 203325 and 222652,for 222654
Arm Head complete,Nos.200072F,200145C,
200334C,200943F,201185D,201187F,201189C 2016210,222405,222407,222408,222417 to 222419,222422,222423,222425 to 222427, 222432,222452,222453,222467,222482, 222566,222576,222578 to 222584,222586, 222595,222598,222636,to 222638,222649, 222650,222653,231827,350078D,350088D, two each 200097C,201051D,201191F,222531
and three 2004CSC
Arm Shaft Collar with two 200382C
Stop Bracket Interlocking Rod,for 222614
Arm Position Pin
Screw Driver (7-1/4 In.long)
Presser Foot Slide Bar Spring Plunger,for
222654
Tension Disc,for 222617
Presser Foot Slide Bar Thumb Screw (pres
26 NUMERICAL LIST OF PARTS
No. Plate I ^ e
350088D 12867 Nipple Carrier Ttautfb Screw (pressure regulating),for 222654
350099C 12965 Looper Operating Collar Set Screw,for 222640
350169E 12967 Arm Head Screw (upper) (long)
350175E 12964 Stop Bracket Screw
350419H 12963 Driving Pulley Sleeve Screw
J
222607 /
222606 222655
200362c
222< 200393c
222511
222526
201032F '22U12
222565
2221+16
350U19H
201663
2221492
200110D
222614
20105';C
222|j9 201216c
222539 f.
222625
222656
il
200119F
•[ 1
^ §^2613
| / a i
r
1
222428/350175s
200076D
222538
222U26
200119F
222i49'
22249U
200119F
201049D
222404
a0105bE 22244b
222434
222642
350099c H(rrrf»
\
200099H
aOlO^bE 202004
222644
•1
201052G 222445 222624
/222596i^°°^^^^
/ / I 222447
222621
201058s
222590
201040D
201039B—
222b27
CT 20IO30S
222Uti5
\
—200261D 2022i»8
22262b
200132s
22258S
20200U
222535
222U26 222496 V0OII9F
222503
222466 201055? 222496 200084F
201054c \ o222467
22250O
200119F
222504 222400
222495
201058K
222b31 201033D
)
3501692 2221+51 200011D 550078
201185D
i1-J350088d_J
201167F222654
222582222595 201035?
200125F
i
20I19IF
222U21 2221+24
22242c/ 20058IH
222419
201051DJ^ 20IO5ID
222638 7 201621c
22256 200072?
222583
22263'7
2810520
222408
222598
222432 200334c
201864
2004030
\
•^22649.-222576) 200097c
200097c 222467
2D0UO3 222407
222404
222kQk 2226U^
2226Ua
20IOU8B 200469B
200029E
12969 - 3/4
222602 201053F
222473
222529
222i^5-l 2221+56-2
2221+57-3 2221+58-1+
2221+59-5 2221+60-6 2221+61-7 2221+62-6 2221+63-9 2221+61+-10 222528-11 2221+65-12
222U72
222U79
2 ID
222601
222522
137 X 1 6 3 ^ (1) (3) (3)
5
12970 - 3/8
11831 222517 22251'-.-
V 2251+98 • \ \
f •
120342
w
201219i:(2)
222520
222523(6)
120343
/
I203UI
222521 222529(6)
'21 \
)® fo
12361(2)
222516
222516
•41564 /
222565
222610 222526
222606 222655 22261b 200393c 350UI9H
200382c
20OO98F
SOIOMOD
201039
222612
222P
20IC58E
-200281D 2022148
222626
200132E
222U85^Jl)^
222515 222617
202U07 2013i2F
20200U
222535
2221428 .200119F
222503
222I488 201035F 2221498 20006I4F
20105Uc 2221487
2214147 200119F
—. 22250I4 -222I490
20105eE
222631 201053D
201053?
A
222U55-I 222U:)b-2 222U57-3 222'*56-'*
222U59-5 2221+60-6 222U61-7 222U62-te 222663-9 222666-10 222528-11 222U65-12
12973 - 3/4
222602
222601
222^73
2010361
222U72
222U79
:2)
222522
A
055113
137 X 1
9 10
(1) (2) 11 (21
12 (21
r
1
I**
