SINGER

SINGER

51W59

From the library of: Superior Sewing Machine & Supply LLC

Form 1978w, Revised

•

^{( 938)}

Printed in U. S. A.

LIST

OF

PARTS

MACHINE No. 51w59

THE SINGER MANUFACTURING COMPANY

•

IND~X

Page Accessories • • • • • • • • • • • • • • • • • . • . . • • • . . • . • • • . . . • . • . . . 14 Bobbin Winder •••••.••.••••••..•...••...••••.••.••.... 14 Feed Dor;s •.•••••.•••••.•..•..••...•...••••.•••... 16 Copyrigh~, U. S. A., 1936 Foot Lifters •••.• , ••• , •.•.•••••...•••...•.••••••..• 15 by The Singer Manufaduring C".

All Rights Reserved for all C"untries Knife Hone ••••••••••••••.•••.•••.••..•.••..•••.•.•... 18

~'bchine No.51w59 .. • • • • • • • • • • . • . .. . • . • . . . . • . . • .. .. • . . . 5 Numerical List of Parts •• , .••••• , •.•.•••.•••••••••... 21 Roller Pressers •••••.•.•••••.••....•••..••••• , •••.... 17 Throat Plates •••••••.•.•••••...•.••..•.•••...•.•. 16 Wood &'lse ••••••••••••••••.••••.•..••.•.•..•..•.•.•... 19 Work Plate • , •• , ••.•••••••.•.•..•.••••••.•••...•• , . . 19

From the library of: Superior Sewing Machine & Supply LLC

INSTRUCTIONS FOR ORDERING

In orderinl': from this list, use ONLY the PART number in the FIHST column.

"!'he number stamped on a Sewing H1chine Part is the number of the Single Part only, except when the part in-

cl~des Set Screws, Clamping Screws, Studs and Rollers Spun on, Srmll Wires riveted, or Parts soldered tol';ether, etc., which 1t is necessary to furnish in combination.

Every coQbinRtion of parts sent out has its specific number \-lhich, alt!Jough not stamped on Parts (except in above case), rost be used \-lllen ordering the combination.

ERch number cclwcy:; indicates the SA}iE PART in what- ever list it appears, or for whatever ~hchine.

The letters after cJOrm of the numbers indicate tlw style of finish only, as follows:

A. Hardened, Polished, Nickel Plated and Buffed.

B. Polished, t:ickel l'lated and Buffed.

C. Hardened only.

D. Polished only.

E. Soft, not polished.

F'. Harder.ed rmd Polished.

H. Blued.

J. Nickel r·lateJ only.

R. l-'l2rlized.

X. Dlack Oxide.

XC. Hardened and Dl:~ck Oxide.

Y. Blade li1 eke l only.

These letters tnCT a: lJclF:D when they Rppear in the list and AFTEH tile number, as in the llst.

In this series

200001 to 201500 and :·>e:OOCJl to 351500 are Sere\-/ !lumbers.

201501 to 201800 and 351501 to 351800 are Nut Numbers.

201801 to 202000 gnd 351801 to 352000 are Roller Numbers.

2o;:.o01 to 350000 are llumhers of l1l.ehine Parts.

The fisures in U1e second column refer only to the plate in \-lllieh tile illustration of tl1e part is sho\-in and are t:OT TC m: mE:D in orderin[':.

Two or more munl;ercc over a cut indicate thRt the dif- ference between uuch parts is not visible in an illustra- tion.

Parts marked wi tll an asterisk ( *) are furnished only w!1en repairs are nnde e1t tlle factory.

No.

•241701

•234002 204235 200010E 202005 241566 244071 200278H 202248 203089 203090 200585H 204296

LIST OF PARTS COMPU~TE FOR

MACHINE No. 51w59

DROP FEED. ROLLER PRESSER HORIZONTAL UNDER TRIMMER

FOR LEATHER

Plate Name

Arm with 202135 Base

17624 Position Pin (2) 17624 Sere\-/ (3) 17624

..

Washer (3) 17623 Cap with two 244071

17623 011 Wick

17623 Screw

17623 Washer

17623 Spool Holder Base

17623

..

₂₀₃₀₈₉

200079H and 204296

17623 Arm cap Spool Holder Base Screw

17623 " Wire

5

with

..

⁶ PARTS FOR MAGIINE No. 51w59 Name

No. Plate 200079H 17623 241567 1762-'3

Arm Cap Spool Holder Wire Hinge Screw Arm cap and Spoo 1 Holder complete, Nos.

203090,241566 and two 200585!!

10554 17624 2000l0E 17624 202005 17624 202249 17623 240802 17623 202244 17623 200338C 1762-'3 207080 17623 200502B 17623

Arm Position Pin (2) Screw (3)

Washer (3)

234003 17624 202635 l 7624 200602E l 7624 200327C 17624 202253 17624 224392 17623 200357E 17623 244063 17623 200328C 17623 200335C 17623

•241703 202258 200570E 203470 2-'35769 203211

•202056 203212 203213 241676 234079 234065 200076D 201272C 241674 241675

17624 17624 17627 17627 17627 17627 17627 17627 17629 17629 17629 17629 17627 17627 .350405C 17627 235771 17627 200984C 17627 200594C 17627

Shaft with 200357E and 224392 Bushing (back) with 202244

Oil Packing (wick) Set Screw (2)

" (front) with 202244 Oil Packing Thumb Screw

Arm Shaft Connection Belt

Pulley with 200327C,200602E and two 202253 Arm Shaft connection Belt PUlley Posi-

tion Screw

Arm ::>llaft Connection Belt PUlley Set screw

Arm Shaft connection Belt Pulley Spring Flange

Arm Shaft Oil Packing (wick) Stop Screw

Balance 1-Jheel (disc) (belt groove 2-l/8 in.diam.) with 200328C and 200335C Balance \.Jheel Position Screw Bed

Set Screw Hinge Connection (2)

Screw (4) Bobbin

case Base with 202056,203211 to 203213 and 203216

Bobbin Case Base Latch Pin Plunger Spring

cap with 200594C,200984C, 235771,241674,241675 and two 350405C Bobbin case Lever

Driving Block Hinge Screw Oiling Felt

Screw (2)

Retainer Screw Tension Spring

" Regulating Screw

" Screw

No.

203216 241677 241732 241733 200934D 200380C 241763

25362 241734 215190 200333C 200l73D 241753 202135 200462D 234010 20064lC 20l5l8E 202276 234084 234011 200038C 200205F 201518E 212637 241502 200362C 201524E 200263D 201528D 241503 241504

221209 241706 200159F

Plate 17627 17627 17630 17630 17630 17629 17630 17630 17629 17630 17630 17630 17633 17633 17633 17625 17625 17625 17625 17625 17625 17625 17625 17625 17637 17628 17628 17628 17628 17628 17628 17628

17629 17629 17629 200583!! 17629 241522 17628 200578H 17628 200024C 17628 203637 17628 221212 17628

PARTS FOR MACI-IINE No. 51w59 7 Name

Bobbin Case Washer (cloth)

Bobbin Case comp1ete,Nos.235769 and 241676

Edge Guide Bracket

Hinge Screw

" Set Screw

" Pack- ing (brass)

Edge Guide Bracket Stop Ball

Retainer Spring

Adjust- ing Screw

Edge Guide Screw (2) Face Plate

Feed Bar

Pos1t1on Pin Thumb Screw

Hinge Screw (driving) Nut Sllde Block

Crank with 200038C 234084 with 200205F,201518E and 202276

Feed Bar Slide Block Crank Pinch Screw Hinge Screw Dog

Lever with 200098E Adjusting Screw

Nut

Check Nut Hinge Screw

Nut Post

241503 with 200265E, 201525E,203610,221212,241502,241522, four each 200054E and 200578H

Feed Dog Lever Post Cover (back) (front)

Clamp Screw

Feed Dog Lever Post Cover (back or front) Screw (6)

Feed Dog Lever Post Cover (slde) with 200362C and 201524E

Feed Dog Lever Post Cover (side) Screw

" Screw (2) Washer (2) Support

From the library of: Superior Sewing Machine & Supply LLC -

8 PARTS FOR MACHINE No. 51w59 No.

200054E 200008C 203637 203610 200265E 20l525E 200098E 234015 202298 200038C 200545C 20l5l8E 202277 200049E 202300 203098

20l0l4C 20l525E 202301 202595 200607C 20l0l4C

Plate 17628 17628 17628 17628 17628 17628 17628 17624 17625 17625 17624 17624 17621 17624 17624 17624

17624 17624 17624 17624 17624 17624 20l525F. 17624 200429C 200383C 202303 234016 202305 200043C 234017 202307

17624 17624 17625 17625 17625 17625 17624 17623

Name

Feed Dog Lever Post Support Screw (2)

\.lasher (2)

Feed Dog Lever Slide Block

Hinge Screw

" Nut Screw

Driving Connection with 200049E and 202277

Feed Dr1vin~ Connection Crank with 200038C

Feed Driving Connection Crank Pinch Screw

Feed Driving Connection Hinge Screw

" Nut Oil Packing (wick) Pinch Screw

Eccentric Regulating Bracket 202:300 with 202635,two each 201014C and 201525E

Feed Driving Eccentric Regulating Brack- et Hinge Screw

Feed Driving Eccentric Regulating Brack- et Hinge Screw Nut

Feed Driving Eccentric Regulating Brack- et Plunger

Feed Driving Eccentric Regulating Brack- et Plunger Spring

Feed Driving Eccentric Regulating Brack- et Plunger Spring Stop Screw

Feed Driving Eccentric Regulating Brack- et Stop Screw

Feed Driving Eccentric Regulating Brack- et Stop Screw Nut

Feed Driving Eccentric Regulating ..Screw Check screw

Feed Driving Rock Shaft

202:303 with 20C64lC,201518E and 234010

Feed Driving Rock Shaft Center (2) Set Screw (2)

Feed Lifting Connection with 200C49E and 202277

Feed Lifting Connection Eccentric with 200382C and 20C437C

No.

200437C 200382C 200545C 2015l8E 202277 200049S 2:34018 202305 200043C 202310

*202311 202443 202619 203061 200262II Z333Gl 200273D 233390

*221214 241602 241679 241550 234024 200555H 241551 200378C 234026 202321 200346C 234027 200378C 234028 20l254C 202253 224392 241604 201376F 20l253F

•241735 202299

PARTS FOR MACHINE No. 51w59 ₉

Plate 17623

17624 17624 17624 17624 17625 17625 17625 1762.'3

17623 17623 17633 17623 17633 17633 17633 17627 17627 17629 17629 17629 17626 17626 17626 17626 17626 17626 17626 17626 17626 17626 1762G 17627 17627 17627 17629

Name

Feed Lifting Connection Eccentric Posi- tion Screw

Feed Lifting Connection Eccentric Set Screw

Feed Lifting Connection Hinge Screw

" Nut Oil Packing (wick) Pinch Screw Rock Shaft

Center (2)

Set Screw (2)

Regulatin~ Spindle with 202311, 202443 and 202619

Feed Regulating Spindle Head Pin

Position Pin Foot Lifter Lifting Lever

Hinge Screw Spring

" Screw Washer

!look (sewing)

221214 with 201253F, 201~-J?LiF' and 241604

Hook and Bobbin Case complete,Nos.241602 and 241677

Hook Bevel Gear Socket,l4 teeth Friction Washer Screw

Pin1on,28 teeth,with two 200378C

Hook Bevel Pinion Set Screw

" Driving Shaft

Bushing (3)

" Set Screw (3) Collar with two 200378C

" Set Screw

Connection Belt Pulley with 202253 and two 201254C

Hook Drl vlng Shaft Connection Belt Pul- ley Set Screw

Hook Driving Shaft Connection Belt Pul- ley Spring Flange

!look Driving Shaft 011 Packing (wick) (3)

Hook Gib

Post

Hinge Screw Screw

Oil Packing (wlck)

' I i I

I I

,,, I

,II

10 No.

200008C 203637 221215 221222 238508 241713 200394C 241736 241737 200158B 200048C 241738 241739 241740 241720 241721 201725D 200389C 200048C 241741 241752 24173 l04D 241751 2001l0D 241742 200168D 200169!1 241743 241744 214833 2003GOC 241745 200061C 241746 2002f),1D 241747 241669 241557 241673 350164C 202552

Plate 17629 17629 17629 17627 17630 17626 17626 17630 17629 17629 17630 17630 17630 17630 17630 17630 17630 17630 17630 17630 17630 17630 17630 17629 17629 17630 17630 17630 17630 17630 17630 17630 17630 17630 17630 17630 17630 17631 17631 17631 17631 17631

PARTS FOR MACHINE No. Slw59

Name Hook Post Screw (2)

Washer (2) Sl1de

Washer Knlfe

Driving cam with two 200394C set Screw

Lever (lower) with 200048C and 241752

Knife Driving Lever (lower)Guard

" Screw (2) Pinch Screw Shaft

KnHe Driving Lever (lower) complete,Nos.

l04D,24173 and 241736

fnlfe Driving Lever (upper) with 200048C

" Locking Plunger Spring

Knife Dr! vlng Lever (upper) Locking Plunger Spring Thwnb Nut with 200389C Knife Driving Lever (upper) Locking

Plunger Spring Thwnb nut Set Screw fnife Driving Lever (upper) Pinch Screw Knife Driving Lever (upper) complete' Nos.

201725D,241720,24172l and 241740 l\nlre Driving Lever Fork

Guard

Screw (2) Lever

Screw (2) Screw (2) Sllart

Spring

SWivel Screw

Adjusting Collar with

200~80C Set

Knife Shaft Spring Adjusting Collar Screw

Knife SWitch-in Lever with 200061C Pinch Screw :>witch-out Lever

1!1nge Screw Plunger

Needle Bar with 200141F Bushing

241557 W1 th 241669 Set Screw

connecting Link

PARTS FOR MACf.JINE No. 51w59

11 No.

264718 200161D 202333

Plate 17631 17631 17631

Name

Needle Bar Connecting Link 011 Guard

" Screw

202254 Stud With

202254 17631

Needle Bar Connecting Link Stud Oi1 Packing (wick)

200374C 17631 Needle Bar Connecting Link Stud Set Screw

200383C 17631 Needle Bar Connecting Link Stud Set Screw

•206891

202329 17631 Needle Bar Connecting Stud 202330 17631

200086C 202692

17631 17631 241540 17631 203172 17631 200428C 17631 200335C 17631 200141F 17631 241535 17634 200352C 17634 202554 17634 200653C 17634 244006 17634 200260D 17634 206608

202337 202338 20008GF 200352C 236089 202346 200492B 200475B 202355 201928

17634 17634 17634 17634 17634 17634 17634 17634 17634 17634 17636

200086C and 202330 206891 With Needle Dar Connecting Stud Oil Packing

(wick)

Needle Bar Connecting Stud Pinch Screw Crank with 200335C,200374C 200383C,2004.2GC and 202333

Needle Bar Crank 202692 with 202329, 202399,202400,202552 and 241549 Needle Bar Crank Friction Washer

Position Screw Set Screw Set Screw

Presser Bar Bushing

" Set Screw Lltter

Hinge Screw

Bracket Li ft1ng Releasing Lever Presser Bar Lifting Releasing Lever

Bracket Guide Screw

Presser ·Bar Lifting Releasing Lever Bracket Spring (spiral)

Presser Bar Position Guide

20008GF' Lever wl th

Presser Bar Position Guide Lever Pinch Screw

Presser Bar Position Guide Set Screw Spring

Stop Rod

ulating) Thumb Screw (pressure reg- Presser Bar Thtunb Screw Thumb Set Screw

Packing (brass)

Roller Presser,l-1/4 1n.diam., 3/16 ln.

race (fine) with 1528J,l766C, 50553C and twenty-four 16232

From the library of: Superior Sewing Machine & Supply LLC

i

',\

12 PARTS FOR MACHINE No. 5lw59 No.

203426 203427 233807 235088

Plate 17636 17636 17634 17634

Name Roller Presser Arm

" 203426 with 201928

• Bracket

" Position Collar

200117F 17634

with 200362C

Roller Presser Arm Bracket Position Col- 200362C 17634

lar Position Screw

Roller Presser Arm Bracket Position Col- 202558 17634

202559 17634 200141F 17634 2000960 17634

lar Set Screw

Roller Presser Arm Bracket Spring

" stop

11 screw screw

Ball,3/32 in.diameter cone

Bar

Hinge screw Nut 16232

1766C 202557

50553C 1528J 233808

17636 17636 17634 17636 17636

17634 Holler Presser and Bar complete,Nos.

200096D,200117F,202557 to 202559, 203427,233807,235088 and two 200141F 241549

202399 202277

17631 17631 17631 202400

202423 2003B3C 202401 200132E 244048 244049 202404 244061 202407 263106 200625F 200061C 204925 2015728 244062

202410 242117 200132E 202412

17631 17631 17631 17634 17634 17632 17632 17634 17632 17632 17632 17632 17632 17632 17632 17632

17632 17632 17632 17623 202413 17634 202414 17632 241544 17632

Take-up Lever

Driving Stud with 202277 Oil Packing (wick)

Take-up Lever lll nge stud with 2024:?'3

II

on

Packing (wick)

11 Set Screw Oiling Felt

Screw Tension Disc (back)

(!ront)

" Release Plunger washer Spring

11 Washer stud with 204925

Set Screw Washer

11 Thumb Nut

Tension complete,Nos.200625F,201572B, 202407,202410,244048,244049,244061 and 263106

Thread Controller Spring Stop Guide

Holler

screw

No.

241545 2000660 200292F 200368H 241546 241755 241756 240439 241758 241759 350280F 214838 241760

223710 241727 202108 3502380 200583H 210993 223844 210957 210958 2003971!

223711

241728 202091 202092 204058 200368Jl 204059 241729 2417.30

2005870 241731

200099Jl Plate 17632 17632 17632 17632 17632 17633 17633 17633 17633 17633 17633 17633 17633

17632 17632 17632 17632 17632 17632 17632 17632 17632 17632 17632

17632 17632 17632 17632 17632 17632 17637 17637

17637 17637

17637

PARTS !=OR MACHINE No. 51w59 Name

Thread Guide Roller Bracket Screw Hinge Screw Set Screw

13

Thread Guide cornplete,Nos.200292F 241544

and 241545 '

Thread Lubricator Oil Pad (!elt) Holder Retainer Reservoir Wick Screw

Washer

Thread Lubricator complete,Nos.214838, 240439,241755,241756,241758 241759

and 350280F ' ·

Thread Hetainer (lower) with 200397Jl Bracket with 202108

11 Position Pin Screw

Sleeve Spring Stud

Screw

" Collar

" Set Screw Thread Retainer (lower) complete Nos

210957' 210958 '210993 223710, •

223844 ' and

Thread Retainer and Bracket complete Nos 223711,241727 and two 200583H ' . Thread Retainer Sleeve

Spring Stud

Set Screw

Thread Retainer complete, Nos. 202091

202092 and 204058 '

Throat Plate Body

" "Needle P1ate,56 elongated needle hole' for needle sizes 12 and 13 (minimum trimming margin.045 inch) Throat Plate Needle Plate screw

Throat Plate complete,56 elongated nee- dle hole,!or needle sizes 12 and 13 Nos. 2417Z9' :0417.30 and two 200587D ' Throat Plate screw (2 )

14

ACCESSORIES

No.

203470

•225482

•225483 225497

Plate 17627

Name Bobbin (5)

II case Screw Driver Blade Handle

17620 Bobbin case Screw Driver complete,Nos.

225482 and 225483 2-'38508

4822 128 X 4 228213 225589

17630 17635 17631 17638 17638

Knife ~crew Nut Wrench

Roller Presser Hinge o d 13 Needles,two each,slzes 11,12 an DriP Pan with rour 1 1n.w1re nails Machine Cushion (leather)

Machine Rest Pin (wood) 41400

120342 120343

•225484

•225485 225498

17620 17620 17620

Oller (copper plated) with 120343

11 Spout,3-l/2 in.long Screw Driver Blade 17620

" Handle

I

in.long), Screw Driver complete (7-1 4

Nos.225484 and 225485 225554 17620 Wrench (steel)

225453 225454 202277 225438 225455 225456 202473 200380C 225381 225444 200056E 225458 225459 225459 202478 200299H 225461 2000820 228026

2102 202407

BOBBIN WINDm

(SWINGING AUTOMATIC, RIGHT HAND)

17619 17619 17619 17619 17619 17619 17619 17619 17619 17619 1'7619 17619 17619 17619 17619 17619 17619 17619 17619 17619 17619

1t ·n "02277 and 225438 Frame w "'

lUnge Pin

011 Packing (wick) Well cap Spring

Plunger Pulley with 200380C

set screw Spindle stop Latch

Screw

11 Thumb Lever

Trip Lever

lUnge stud Joint Stud

11 Hinge Screw

Tension Bracket with 201499B

11 Screw Disc

Spring

" Washer

No.

2014998 2015728 225462

225433 225382

227952 227678 227954 202784 225016 227953 227955

Plate 17619 17619 17619

17619 17619

17620 17620 17620 17620 17620 17620 17620

ACCI:SSORII:S 15

Name Tension Stud

11 Thumb Nut

Bobbin Winder Tension Bracket complete, Nos.201572B,202407,225461 and two

·2102

Bobbin Winder and Tension Bracket Base Universal Bobbin Winder complete, Nos.

200056E,200082D,200299H,202473,202478 225381,225433,225444,225453 to 225456 225458,225462,228026 two each 225459 and wood screws 3/4 1n.,No.l2 R.H.B.

FOOT LIFTER

Foot Lifter Lever (left or right) with 227954

Foot Lifter Lever Chain, 48 ln.long with 202784

Foot Lifter Lever Chain Hook (lower) (upper)

11 Hinge Pin

Stand with two wood screws 1 ln. ,llo.l2

Foot Lifter Lever (left or right) com- plete,Nos.225016 ,227678,227952 and 227953

(Other Foot Lifter parts are listed with parts of rmchine head)

FOOT LIFT~R

Furnished in place of 227955 when so ordered 227060 17639

227102 17639 227670 17639 225592 17639 202784 17639 204128 17639 241620 17639

Foot Lifter Lever (on floor) with 225592

11 227060 with 227678 and two 204128

Foot Lifter Lever Chain,48 1n.long,w1th 202784

Foot Lifter Lever Chain Hook (lower) (upper) Stand w1 th t:wo wood screws l ln., !lo .12

Foot Lifter Spring

From the library of: Superior Sewing Machine & Supply LLC

I . : \

~

^I

I

il'i

I I I

16

No.

212637 221254

241729 241748 241730

241749

241981 Plate 17637 17637

17637 17637 17637

17637

17637

200587D 17637 241731 17637

FEED DOGS

Name

Feed Dog,for 241731 and 241750

" 241982

THROAT PLATES

Throat Plate Body

Needle Plate,56 elongated needle hole,for needle slzes 12 and 13 (minimum trimming marg1n.045 inch)

Thro~t

Plate Needle Plate,50

elo~~a:~~

needle hole,for needle sizes

Thr~~t

Plate Needle Plate (beveled) G6 elonzated needle hole,ror needle sizes l2and 13 (minimum trimming mar- gin.045 inch)

Throat Plate Needle Plate Screw

Throat Plate complete,56 elongated

~e~~­

le hole ror needle sizes 12 an , ' Nos.241~2CJ,241730 and two 200587D,!or 212637

50 longated need- 241750 17637 Throat Plate com;Jlete, e d 1'3 le hole for needle sizes 16 an c,

241982 17637

241;48 241749 and two 200587D,for Nos. •

212637

Throat Plate (beveled) complete, 56 elon~;

ated needle hole,for needle slz:stwo and 13,Nos.241729,241981 an 2005a7n,ror 221254

No.

201926

201928

201931

201933

201951

201954

201971

201963

351821

203422 203426 203423 203427 203430 203431 203432 238527 203434 237816 241904

Plate 17635

17636

17636

17636

17635

17635

17636

17636

17636

17635 17636 17635 17636 17636 17636 17635 17636 17636 17635 17636 233807 17634 235088 17634

17

ROLLER PRESSERS

Name

Roller Presser,13/l6 1n.J1am. ,5/32 ln.

race (tine) with 1528J, 201699C, 350104C and twenty-eight 206417 Roller Presser,l-1/4 1n.diam.,3/l6 ln.

face (fine) with l528J,l766C, 50553C and twenty-four 16232

Roller Presser,l-1/4 1n.d1am., 1/8 ln.

race (fine) with l528J,l76GC, 50553C and twenty-four 16232

Roller Presser,l-1/4 1n.da1m., 1/16 ln.

race (fine) with l528J,l766C, 50555C and twenty-four 16232

Roller Presser,l3/lG 1n.d1am., 3/16 ln.

race (fine) w1 th 1528J, 201699C, 350104C and twenty-eight 206417 Roller Presser,l3/16 1n.d1am., 1/8 ln.

face (fine) with 1528J, 201699C, 350104C and twenty-eight 206417 Roller Presser,l-1/4 1n.d1am.,3/32 ln.

race (fine) with l528J,l766C, 50553C and twenty-four 16232

Roller Presser,l-1/4 in.dlam., 5/32 ln.

race. (fine) with 1528J,l766C, 50553C and twenty-four 16232

Roller Presser 1-l/8 1n.diam.3/16 ln.

race (f1ne),ror use with (beveled throat plates) with 1528J, 1766C, 50553C and twenty-four 16232

Roller Presser Arm

with 200362C

• 203422 with 201926

" 203426 with 201928

11 203426 with 201931

II 203426 W1 th 201933

11 203422 with 201951

" 203426 w1 th 201971

" 203426 with 201963

11 203422 with 201954

" 203426 with 351821

" Bracket

" Position Collar 200ll7F 17634 Roller Presser Arm Bracket Position Col-

lar ?osition Screw

200362C 17634 Roller Presser Arm Bracket Position Col- lar Set Screw

•

18 No.

202558 202559 200141F'

Plate 17634 17634 17634 2000960 17634 16232 17636 206417 17635 1766C 17636 201699C 17635 202557 17634 50553C 17636 350104C 17635 1528J 17635 233808 17634

233843 17634

23 784 7 17634

259281 17640 259282 17640

259266 17640 259267 17640 259268 17640

8990 17640 1359J 17640 36006 17640 259269 17640 259284 17640 771J 17640 41544 17640 259270 17640 259271 17640 215057 17640 2004668 17640 259272 17640

ROLLER PRESSERS Name

Roller Presser Arm Bracket Spring

" Stop

" Screw Screw

Ball,3/32 in.diarneter 1/16 in.diameter

" Cone Bar

Hlnge Screw

" Nut

Roller Presser and Bar complete,Nos.

200096D,200117F,202557 to 202559, 203427,233807,235088 and two 200141F' Roller Presser and Bar complete,Nos.

200096D, 200117F, 202557 to 202559, 203432,233807,235088 and two 200141F' Roller Presser and Bar complete,Nos.

200096D,200117F,202557 to 202559, 233807,235088,237816 and two 200141F

KNIFE ~ONE

Base with 457C and two 899D

" 259281 w1 th 674D, 721D, 259274 to 259277,259309,259310,350372C and 350:373J

Knife Holder Clamp

" Base

" 259267 w1 th 771J, 1359J,36006,41544,259266,259269 and 259284

Knife Holder Cl;;J.rnP Base Locking Thwnb Screw

Knife Holder Clamp Hinge Screw

" " Washer

" Spring

" Washer Clamping Thumb Screw

" Washer Hone

" Clamp

Position Pln

" Thumb Screw Holder with two 215057

No.

259273

Plate 17640 259274 17640 259275 17640 7210 17640 259276 17640 6740 17640 259277

350372C 350373J 259310 259309 457C 8990 259283

17640 17640 17640 17640 17640 17640 17640 17640

241542 17638 200019E 17638 202622 17638 213856 17638 200189C 17638 200189C 17638 213860 17638 241543 17638

KNIFE HONE

19 Name

Knife Hone Holder 259272 with 259270,two each 2004668 and 259271

Knife Hone Holder Guide

" Collar

Screw

Set Screw Yoke

Hinge Knife Hone Holder Guide Collar Yoke Hinge

Screw Bushing

Knife Hone Holder Guide Collar Yoke Hinge Screw Bushing Set Screw

Knife Hone Holder Guide Thumb Set Screw

" Stop Pin (long)

" " (short) Set Screw Thumb Screw

Honing Device complete,Nos.259268,259273 259282, Form 2399\o/ and three wood screws 1-1/2 1n.,No.8

WORK PLATE

Work Plate

Arm Screw

" Washer Bracket

Screw Screw

Slide (back or front)

Work Plate complete,Nos.200019E,202622, 213856,213860,241542 and four 200189C

WOOD BASE

227493 17638 225589 17638 227094 17638

Bed Hinge Plate 202259 w1 th two wood screws 7/8 in.,No.l2H

Machine Cushion (leather)

Wood Base (oblique) wtth two 227493, four 225589 and ninewoodscrews 1-1/2 1n.,No.7

----·-·--- ^{.. -·-....-·}

·--·~---~---

From the library of: Superior Sewing Machine & Supply LLC

(~enuine Singer Needles should be used in Singer 1\-lachines.

These Needles and their Containers :He marked with the Company's Trade Mark "SIMANCO."

Needles in Containers marked

"For Singer Machine&"

are not Singer made needles.

No.

104D 4570

21

NUM~RICAL LIST OF PARTS

Plate 17630 1'7640

Name

Knl!e Driving Lever Fork Swivel Screw, for 241739

Honing Device Knife Stop Pin Set Screw, for 259281

G74D 17540 Honin['; Device Knife Hone·Holder Guide Collar Yoke Hinge Screw,!or 259282 721D 17640 l!onin['; Device Knite Hone Holder Guide

Collar Set Screw,for 259282

77lJ 17640 Honinrs Device Kn1fe Holder Clamping Thumb screw,for 259268

899D 17640 Honing Device Knite Holder Clamp Base Locking Thumb Screw,for 259281 899D 17640 Honing Device l\n1fe Stop Pin Thumb Screw,

for 2592131

l359J 17640 Honing Device J·;n1fe Holder Clamp lUnge Screw,for 2S9268

l528.J 17635 Roller Presser Hinge Screw Nut, !or

1766C

2102 4822 l(Jc;.'i4 l'i232

17G3G

l76l'l 17635 17624 l763G

20192G,201928,20193l,20l933,20l95l, 201954,201963,201971 and 351821 Roller Presser Ball Cone, tor 201928,

201931, 20HJ::S3, 201CJG3, 201971 and 351821

Bobbin Winder Tension Disc,for 225462 Roller Presser Hinge :Jcrew Nut Wrench Arm Posltlon Pin

Roller Presser Btll, 3/3':' ln.dlam., fer :J'E'2'?, 2Cl 'J31, ~:0193::5, ;'.019C:3, 201971 J.nd 3f-l22l

2.~173 1763(; Knife Drlvlng Lever Fork SWlvel, fr'r :C·ll?::lc'

2~362 17630 Edge Guide Bracket Stop Ball

3f.'C0G 1'1610 Hrmlng Devlce Knife Holder Clam;> Hlnge Screw washer, fer 2~9:?68

41400 17620 Mlchlne Rest Pln (wood)

41544 17640 Honing Device KnJfe t!'>lder Clamplng Thumb Screw Washer, fur 259260 f-O.~.'i3C 176:36 Roller Presser Hlnge Screw, for 201928,

201931, 201~3~. 201963, 201971 and

3~ lll? l

120342 17620 Oller (copper plated) with 120343 120343 17620 Spout,3-l/2 1n.1ong,for 120342 200008C 17628 Feed Dog Lever Post Support Screw 200008C 17629 Hook Post Screw

200010E 17624 Arm Rase c:crew 200010E 17624 Screw

200019E 17638 Work Plate Arm Screw,for 241543 200024C 17628 Feed Dog Lever Post Screw

---·--- . ^., •. ^{, ...}

From the library of: Superior Sewing Machine & Supply LLC

•

₂₂ NUMERICAL LIST OF PARTS

Plate Name

No. Slide Block Crank Pinch Screw,

200038C 17625 Feed Bar

for 234084 Pinch

2000-.'38C 17625 Feed Driving connection Crank scre'.l,for 202298

17625 Feed Driving Rock Shaft Center Set Sere\./

200043C Lifting Rock Shaft center set Screw 200043C 1177662350 Knife Driving Lever (lo\.ler) Pinch Screw, 200048C

for 241736

(upper) Pinch Sere\./, 200048C 17630 Knife Driving Lever

for 241740

17624 Feed Driving connection Pinch Scre'.l,for 200049E

~'34015

17624 Feed Lifting Connection Pinch Scre'.l,for 200049E

2:34017

17628 Feed Dog Lever Post Support Scre'.l,for 200054E

24~~ o f

Bobbin Winder Stop Latch ocrew, or 200056E 17619

225382

1 Lever Pinch Scre'.l,for 200061C 17630 Ynlfe S\.litch- n

241745

17632 Tension Stud Set sere\./

200061C 17632 Thread Guide Roller Bracket Sere\./

2000660 17629 Bobbin case Lever Driving Block Sere\./

2000760 17623 Arm cap Spool Holder Wire Hinge sere\./, 200079H

ror 203090

17619 Bobbin Winder Tension Bracket Sere\./, for 200082D

225382

17631 Needle Bar Connecting Stud Pinch Sere\./, 200086C

for 202329 h

Bar Position Guide Lever Pine 200086F 17634 Presser

screw,for 202:338

17634 Roller Presser Arm Screw, for 233808, 200096D 2:33843 and 237847

200098E 200099H 2001100 200117F

200132E 200132E 200141F 200141F 200158B 200159F

17628 17637 17629 17634

Feed Dog Screw,ror 241502 Throat Plate Sere\./

Knife Guard Sere\./

Roller Presser Arm Bracket Position Col- lar Position Scre\.l,for 233808,2:33843 and 237847

17634 Take-up Lever Oiling Felt Sere\./

17632 Thread Controller Spring Stop Sere\./

Needle Set Scre'.l,for 241669 17631

17634 17629 17629

Roller Presser Arm Bracket Spring Stop f 2:33808 233843 and 237847 sere\./, or ' ) d sere\./

Knife Driving Lever (lower Guar

Feed Dog Lever Post Cover (front) ClamP

Sere\./ Link Oil Guard

200161D 17631 Needle Dar Connecting sere\./

200168D 17630 Knlfe Lever Sere\./

No.

200169H 200173D 200189C 200189C

Plate 17630 17630 17638 17638 200205F 17625 200260D 17634 200262H 17633 200263D 17628 200265E 17628 200273D 17633 200278H 17623 200284D 17630 200292F 17632 200299H 200327C 200328C 200333C 200335C 200335C 200338C 200346C 200352C 200352C 200357E 200362C 200362C

17619 17624 17623 17630 17623 17631 17623 17626 17634 17634 17623 17628 17634 200368H 17632 200368H 17632 200374C 17631 200378C 17626 200:378C 17626 20038CX:: 17619 200380C 17629 200380C 17630

NUMERICAL LIST OF PARTS Naroo Knife Sere\./

Edge Guide Sere\./ , •

Work Plate Bracket Screw,ror 241543 Scre\.l,!or 241543 .. ,,~·-

Feed Bar Slide Block Hinge Screw, tor·

234011

Presser Bar Llftlng Releasing Lever Bracket Guide Screw

Foot Lifter Lifting Lever Hinge Screw Feed Dog Lever Hinge Screw

" Slide Block Hinge screw, tor

241504 ,,

Foot Lifter Lifting Lever Spring Screw Arm Cap Sere\./

Knife SWitch-out Lever Hinge Screw Thread Guide Roller Hinge Screw, tor

241546

Bobbin Winder Stop Latch Trip Lever Hinge Scre\.l,for 225382

Arm Shaft Connection Belt Pulley Set Scre\.l,for 202635

Balance Wheel Position Screw,for 244063 Edge Guide Bracket Stop Ball Spring Ad-

justing Sere\./

Balance Wheel Set Scre'.l,for 244063 Needle Bar crank Set Screw,for 202692 Arm Shaft Bushing Set Screw

Hook Driving Shaft Bushing Set Screw Presser Bar Bushing Set Screw

Position Guide Set Screw Arm Shaft 011 Packing Stop Screw,tor

202249

Feed Dog Lever Adjusting Screw, tor 241522

Roller Presser Arm Bracket Position Col- lar Set Scre'.l,for 2:35088

Thread Guide Set Screw Retainer Stud Set Screw

Needle Bar Connecting Link Stud Set Scre\.l,for 202692

Hook Bevel Pinion Set Screw,ror 241551 Dr! ving Shaft Collar Set Sere\./, tor 234027

Bobbin Winder Pulley Set Screw, tor 202473

Edge Guide Bracket Hinge Screw Set Screw Knife Shaft Spring Adjusting Collar Set

Scre'.l,for 214833

200082C 17623 Feed Lifting Connection Eccentric Set Screw, for 202307

24 NUMERICAL LIST OF PARTS No.

200383C 2oo:383C 200383C 200389C

Plate 17624 17631 17631 17630

200394C 17626 200397H 17632 200428C 17631 200429C 17624 200437C 1762..3 200462B 17633 200466B 17640 200475B 17634 200492B 17634 200502B 17623 200545C 17624 200545C 17624 200555H 17629 200570E 17624 200578H 17628 200583]{ 17629 200583H 17632 200585H 17623 2005870 17637

Name

Feed Dr1v1ng Eccentric Regulating Screw Check Screw

Needle Bar connecting Link Stud Set Screw,!or 202692

Take-up Lever Hinge Stud Set Screw Knife Driving Lever (upper) Locking

Plunger Spring Thumb Nut Set Screw,

!or 201725D

Knife Driving Cam Set Screw, for 241713 Thread Retainer (lower) Stud Set Screw,

for 22.'3710

Needle Bar cranlc Position screw, !or 202692

Feed Driving Eccentric Regulating Screw Lifting connection Eccentric Posi- tion Screw,!or 202307

Face Plate Thumb Screw

Honing Device Knife Hone ClamP Thumb Screw,ror 259273

Presser Bar Thumb Screw Thumb Set Screw

" (pressure regula- ting)

Arm Shaft BUshl ng (front) Oil Packing Thumb Screw

Feed Driving connection Hinge Screw Lifting Connection Hinge Screw Hook Bevel Gear Socket Screw Bed Hinge connection Screw

Feed Dog Lever Post cover (side) Screw, for 241504

Feed Dog Lever Post Cover (back or !ront) screw

Thread Retainer (lower) Screw,ror 241728 Arm Cap Spool Holder Base Screw, for

241567

Throat Plate Needle Plate screw, ror 241701,241750 and 241982

200594C 17627 Bobbin case Tension Spring screw, for 241676

200602E 17624 200607C 17624 200625F 17632 200641C 17625 200653C 17634 200934D 17630 200984C 17627

Arm Shaft Connection Belt Pulley Posi- tion Screw,!or 202635

Feed Dr1v1ng Eccentric Regulating Brack- et Plunger Spring Stop Screw

Tension Stud with 204925,!or 244062 reed Bar Hinge Screw (driving), ror

234016 .

Presser Bar Lifter Hinge Screw Edge Guide Bracket Hinge Screw

Bobbin Case Tension Spring Regulating screw,ror 241676

No.

201014C 201014C 201253F 201254C 201272C 201376F 201499B 201518E 201518E 201518E 201518E 201524E 201525E 201520E 201525E

Plate 17624 17624 17627 17626 17629 17627 17619 17625 17625 17624 17624 17628 17628 17624 17624 201528D 17628 201572B 17619 201572B 17632 201699C 17635 201725D 17630

201926 17635

201928 17636

201931 17636

201933 17636

201951 17635

NUMERICAL LIST OF PARTS 25

Name

Feed Driving Eccentric Regulating Brack- et Hinge Screw,!or 203098

Feed Driving Eccentric Regulating Brack- et Stop Screw

Hoole Glb Screw,!or 241602

" Driving Shaft Connection Belt Pulley Set Screw,ror 234028

Bobbin Case Lever Jl1nge Screw Hook Gib Hinge Screw,tor 241602 Bobbin Winder Tension Stud,for 225461 Feed Bar Hinge Screw Nut,!or 234016

" " Slide Block Hinge t>crew Nut,for 234011

Feed Driving Connection Hinge Screw Nut

" Ll!ting Connection 1!1nge Screw Nut Dog Lever Adjusting Screw Check Nut, tor 241522

Feed Dog Lever Slide Block Hinge Screw Nut,for 241504

Feed Driving Eccentric Regulating Brack- et Hinge Screw Nut, tor 203098 Feed Dr1v1ng Eccentric Regulating Brack-

et Stop Screw Nut

Feed Dog Lever Hinge Screw Nut

Bobbin Winder Tension Stud Thumb Nut,tor 225462

Tension Thumb Nut,!or 244062

Roller Presser Ball Cone, tor 201926, 201951 and 201954

Knife Drl vlng Lever (upper) Locking Plunger Spring Thumb Nut,wlth 2~389C

tor 241741

Roller Presser,l3/l6 1n.d1am., 5/32 ln.

race (fine) with 152BJ,201699C, 350104C and twenty-eight 206417,!or 203423

Roller Presser,l-1/4 1n.diam.,3/l6 ln.

race (f1ne),w1th l528J ,l766C,50553C and twenty-four l6232,tor 203427 Roller Presser,l-l/4 ln.diam., l/8 ln.

face (fine) with l528J, l766C, 50553C and twenty-four l6232,!or 20l,~o0

Roller Presser,l-1/4 in.dlam.,l/16 ln.

!ace (rlne) with l528J,l766C',50553C and twenty-!o~r 1G~32,!or 203431 Roller Presser,l3/l6 1n.d1am.,3/l6 ln.

race (fine) with 1528J ,201699C ,' 350104C and twenty-eiv~t 206417,!or 2034'32

From the library of: Superior Sewing Machine & Supply LLC

26 NUMERICAL LIST OF PARTS Na!OO No.

201954

Plate

17635 Roller Presser,l3/16 in.diam., 1/8 in.

race (tine) with 1528J, 20l699C, 350104C and twenty-eight 206417,!or 237816

201963 17636 Roller Presser, 1-1/4 in. <Ham· • race (tine) with 1528J, l766C, 50553C and twenty-tour l6232,!or

201971 17636

203434

Roller Presser,l-1/4 in.diam.,3/32 in.

race (tine) with 1528J ,1766C,50553C and twenty-tour 16232,!or 238527 202005

202005

17624 17624

Arm Base Screw wa~her

•202056 202091 202092 202108

screw Washer

Bobbin case Base Latch Pin,ror 235769 Thread Retainer Sleeve,ror 204059

spring,ror 204059 17632

17632

17632 (lower) Bracket Position

202135 202244

17633 17623

Pin,!or 241727

Face Plate Position Pin,ror 241701 Arm Sha!t BUshing Oil Packing (wick),ror

202248 202249 202253 202253 202254 202258 202276 202277 202277 202277 202277 202298 202299 202300 202301 202303 202305 202305 202307

17623 17623 17624 17626 17631 17624 17625 17619 17624 17624 17631 17625 17629 17624 17624 17625 17625 17625 17623

207080 and 240802 Arm Cap Screw \olasher

Shaft with 200357E and 224392 connection Belt Pulley Spring Flange,ror 202635

Hook Driving Shaft Connection Belt Pul- leY Spring Flange,ror 234028

Needle Bar connecting Link stud Gil Packing (wick),for 202333

Bed Hinge Connection

Feed Bar Slide Block,!or 234011

Bobbin Winder Frame Oil Packing (wick), for .225453

Feed Driving connection Oil Packing (wick),ror 234015

Feed Lifting connection Oil Packing (wick),ror 234017

Take-up Lever Driving Stud Oil Packing (wick),ror 202399

Feed Driving connection crank with 200038C

Hook Post Oil Packing (wick)

Feed Driving Eccentric Regulating Brack- et,ror 203098

Feed Driving Eccentric Regulating Brack- et Plunger

Feed Driving Rock Sha!t,ror 234016

• center Lifting Rock Shaft center

connection Eccentric with 200382C and 200437C

No.

202310

•202311 202321 202329 202330 202333 202337 202338 202346 202355 202399 202400 202401 202404 202407 202407 202410 202412 202413

Plate 17623

17626 17631 17631 17631 17634 17634 17634 17634 17631 17631 17634 17634 17619 17632 17632 17623 17634 202414 17632 202423 17631 202443 17623

NUMERICAL LIST OF PARTS 27.

Name

Feed Regulating Spindle w1 th 202311, 202443 and 202619

Feed Regulating Spindle Head,!or 202310 Hook Driving Shaft Bushing

Needle Bar Connecting Stud 206891 with 200086C and 202330,!or 241540

Needle Bar Connecting Stud 011 Packing (wick),ror 202329

Needle Bar Connecting Llnk Stud with 202254,!or 202692

Presser Bar Position Guide

II II Lever with

200086F

Presser Bar Spring Stop Rod

" 11

Thumb Screw Thumb Set Screw Packing (brass)

Take-up Lever Driving Stud with 202277, tor 241540

Take-up Lever Hinge Stud with 202423,tor 241540

Take-up Lever Oiling Felt Tension Release Plunger

Bobbin Winder Tension Spring,!or 225462 Tension Spring,!or 244062

Thread Controller Spring,tor 244062

" Guide

Take-up Lever 1!1nge Stud 011 Packing (wick),!or 202400

Feed Regulating Spindle Head Pin, tor 202310

202473 17619 Bobbin Winder Pulley with 200380C, tor 225382

202478 17619 Bobbin Winder Stop Latch Trip Lever, tor 225382

202552 17631 Needle Bar Connecting Link,!or 241540 202554 17634 Presser Bar Lifter

Nos.202557 to 202559,!or 233808,233843 and 237847 202557 17634 Roller Presser Bar

202558 17634 " Arm Bracket Spring 202559 17634 " " • Stop 202595 17624 Feed Driving Eccentric Regulating Brack~

et Plunger Spring

202619 17623 Feed Regulating Spindle Head Position Pin,for 202310

202622 17638 Work Plate Arm Screw Washer, tor 241543 202635 17624 Arm Shaft Connection Belt Pulley with

200327C,200602E and two 202253,tor 203098

28 NUMERICAL LIST OF PARTS

Plate Name 00374C

No.

202692 17631 Crank with 200335C,2 '

Needle Bar <l 202333 ror 241540 200383C,200428C an H k (upper),ror Foot Lifter Lever Chain oo

227678 202784 17639

203061 17633 ^~'oot Lifter LUting Lever "03090 Arm Cap Spool Holder Base, for~ , ith 203089 17623 " " " 203089 w 203090 17623

''00079H and 204296. ror 241567 k

~ , i Regulating Brae -

Feed Driving Eccentr c h

et 20&~00 with 202635,two eac 203098 17624

ZOlOl4C and 201525E

N edle Bar crank Friction Washer

e 3 r 235769

203172 17631

Nos.2032ll to 20321 ' or Bobbin Case Base Latch

2032ll 17627 , Plunger

S>Jring 203212 17627

203213 17627 203216 17627 203422 17635

Washer (cloth), ror 235.769 r 203423,203432 and Roller Presser Arm, or

203423 203426

237816 03422 with 201926 17635 Roller Presser Arm 2 427 2034:.~0'

" " tor 203 • 17636 ,, , 434 238527 and 241904

~03431,

²⁰³

~rm

203426 with 201928' 17636 Roller Presser

203427 203430 203431 203432 203434 203470 203610 203637 203637 203637 204058 204059 204128 204235 204296 204925 206417 206600

*206891 207080 210957

17636 17636 17635 17636 17627 17628 17628 17628 17629 17632 17632 17639 17624 17623 17632 17635 17CZ>4

17623 17632 210958 17632

ror 233808 Arm 203426 with 201931

R ller Presser ₀ 33

" 203426 with 2019

• 203422 with 201951,

ror 2338~) ln63

Arm 2o3426 with 20 ^J Roller Presser

~~~~i~og

Lever Slide.Block,for 241504 , Post screw Washer

, n Support screw Washer Hook Post screw Washer

stud ror 204059

Thread Retainer ' _ Nos 202091, Thread Retainer complete ' .

202092 and 2°4058 wood

t Lifter Lever Stand with two Foo screws 1 in. 'No. 12 ror 227102 '

Arm Base Position Pin , 90

• Cap Spool Holder Wire,ror 2030

·d " h r ror 200625F

Tension Stu ,as e ' ror

11 1/16 in. diam., Roller Pre3ser Ba ,

201926,201951 and 201954 ver B Lifting Releasing ]_,e

Presser ar J

Bracket ::>pring (spiral) 202329 cting stud,for - Needle Bar Conne ( t) ~ith 202244

c rt Bushing rron

Arm .oha wer) stud' ror 2237ll Thread Ret~1ner (lo, Collar, foJ

No.

210993 212637 213856 213860 214833 214838 215057 215190 22120'-l 221212

*221214 221215 221222 221254 223710 22'3711

223844 224"3:12 224:392 225016 225:"581 225382

225433 225438 225444 22545.) 225454 225455 225456 225458 225459

Plate 17632 17637 17638 17638

NUMERICAL LIST OF PARTS 29

Name

Thread Retainer (lower) Sleeve, tor 223711

Feed Dog,for 241731 and 241750 Work Plate Bracket,ror 241543

Slide (back or !ront), for 241543

17630 Knife Shaft Spring Adjusting Collar with 200380C

17633 Thread Lubricator Screw "Washer, for 241760

17640 Honing Device Knife Hone Cl~ Position Pin,for 259272

17630 Edge Guide Bracket Stop Ball Spring 17629 Feed Dog Lever Post Cover (back) 17628 " support,ror 241504 17629

17627 17637 17632 17632

17632 17623 17626 17620 17619 17619

17619 17619

Hook (sewing),for 241602 Post 811de

Washer

Feed Dos,for 241982

Thread Retainer (lower) w1 th 200397H, for 225711

Thread Retainer (lower) COJ11Plete, Nos.

210'157, 210958,210993,223710 and 223844,for 241728

Thread Retainer (lower) Spring, !or 223711

Arm Shaft Oil Packlng (wlck),for 202249 Hook Driving Shaft Oil Packing (wick) -Foot L1 fter l.ever l!1nge Ptn, for 227955 Dobbin Winder C)p1ndle, for 225382

Universal Bobbin Winder COI119lete, Nos.

200056E,200082D,200299H,202473,202478 225381, 225433, 225444, 225453 to 225456 225458,225462,228026 two each 225459 and wood screws 3/4 in.,No.l2,R.H.B.

Bobbin Winder and Tension Bracket Base, for 22.5:582

Bobbin Winder Frame 011 Well Cap, tor 22545.'3

17619 Bobbin Winder Stop Latch,for 225382 Nos.2254:53 to 225456,for 225382

17619 Bobbin Winder Frame with 202277 and 2254:38

17619 Bobbin Winder Frame Hinge Pin

17619 Spring

17619 " Plunger

17619 Stop Latch Thumb Lever,ror 22.5:582

17619 Bobbin Winder Stop Latch Thumb Lever Hinge Stud,for 225382

From the library of: Superior Sewing Machine & Supply LLC

30 NUMERICAL LIST OF PARTS No.

225459

Plate Name

l. 7619 Bobbin Winder Stop Latch Thumb Lever Joint Stud,tor 225382

17619 Bobbin Winder Tension Bracket with 225461

225462

201499B,tor 225462

17619 Bobbin Winder Tension Bracket complete, Nos.20l572B,202407,225461 and two 2102,tor 225382

Bobbin Case Screw Driver Blade, tor 225497

Bobbin Case screw Driver Handle, tor 225497

•225484

•225485 225497

Screw Driver Blade,tor 225498 Handle,tor 225498

17620 Bobbin case Screw Driver complete,Noa.

225482 and 225483

17620 Screw Driver complete (7-1/4 in.long), 225498

225554 225589 225592 227060 227094

227102 227493 227678 227952 227953 227954 227955

228026

NOS. 225484 and 225485 17620 Wrench (steel)

17638 Machine cushion (leather),tor 227094 17639 Foot Litter Lever Chain Hook (lower),tor

227060

17639 Foot Litter Lever (on !loor) with 225592, tor 227102

17638 wood ease (oblique) with two 227493,tour '225589 and nine wood screws 1-1/2 in., No.7

17639 Foot Litter Lever 227060 with 227678 and two 204128

17638 Bed Hinge Plate 202259 with two wood screws 7/8 in.,No.l2,tor 227094 17639 Foot Litter Lever Chain,48 in.long,with

202784,tor 227102 and 227955

17620 Foot Litter Lever (lett or right) with 227954, tor 227955

17620 Foot LUter Lever Stand with two wood screws 1 in.,No.l2,tor 227955

17620 Foot Litter Lever Chain Hook (lower),tor 227952

17620 Foot Litter Lever (lett or right)

co~

plete,Nos.225016,227678,227952 and 227953

17619 Dobbin Winder Tension Bracket Screw Washer,tor 225382

228213 2,33361

17638 DriP Pan with tour l_in.wire nails 17633 Foot Litter Lifting Lever Spring

17633 • washer

233390 233807 233808

17634 Roller Presser Arm Bracket,tor 233808, 2.'33843 and 23784 7

17634 Roller Presser and Bar complete,Nos.

200096D,200117F,202557 to 202559, 203427,233807,235088 and two 200141F

No.

233843

•234002 234003 234010 234011 234015 234016 234017 234018 234024 2.'34026 234027 234028 234065 234079 234084 235088

235769 235771 236089 237816 2.)784 7

238508 238527 2404.)9 240802 241502 241503 241504

241522 241535

Plate 17634

17624 17625 17625 17624 17625 17624 17625 17629 17626 17626 17626 17629 17629 17625 17634

17627 17627 17634 17635 17634

17630 17636 17633 17623 17628 17628 17628

17628 17634

NUMERICAL LIST OF PARTS 31 Naroo

Roller Presser and Bar complete Nos 200096D,200117F,202557 to

2oZss9.

203432,233807,235088 and two 200141F, Arm Base

" Shaft Connection Belt Feed Bar,tor 234016

II II Slide Block Crank Z34084 w1 th 200205F,201518E and 202276

Feed Driving Connection with 200049

202277 · F. and

Feed Drl ving Rock Shaft 202.303 wl th 200641C,201518E and 234010

Feed Lifting Connection with 200049E

202277 and

Feed Litting Rock Shaft

H~ok Bevel Gear Socket Friction ^\las

Driving Shaft her

"

11

:: Collar with two 20<X378C Connection Belt Pulley with 202253 and two 20l254C

Bobbin Case Lever Driving Block

u n n

Feed Bar Slide Block Crank with 20<XX38C

tor 234011 '

Roller Presser Arm Bracket Position Col- lar with 200362C,tor 233809 ~

and 23784'7 '

Bobbin Case Base with 202056,200211 to 203213 and 203216,tor 241697

Bobbin Case Tension Spr1ng,ror 241676 Presser Bar Spring . Roller Presser Arm 203422 with 2019

for 237847 54,

Roller Presser and Bar complete Nos 200096D,200117E,202557 to

zo2ss9'

233807' 235088' 237816 and two 200141F, Kntre

Roller Presser Arm 203426 with 201971 Thread Lubricator 011 Pad Retal t

241760 ner, or

Arln Shatt Bushing (back) with 202244 Feed D?,g Le~er with 200098E, tor 241604

Post,for 241504

II II n 241503 V/i th 200265E 201525E,203610,221212,241502,241522, tour each 200054E and 200S7SH ' Feed Dog Lever Post Cover (side) w1 th

200362C and 201524E,tor 241504·

Presser Bar Bushing

32 No.

241540 241542 241543 241544 241545 241546 241549 241550 241551 241557 241566 241567 241502 241604 241620 241669

<>241670 241673 241674 241675 241676 241677 24167c:l

•241701

*241703 241706 241713 241720 241721 241727 241720 241729 241760

Plate 17631 17638 17638 17632 17632 17632 17631 17629 17626 17631 17623 17623 l7G27 17627 17639 17631 17631 17627 17627 17627 17627 17627

17629 17626 17630 17630 17632 17632 17637 17637

NUMI:':RICAL LIST OF PARTS Name

Needle Bar Crank 202692 with 202329, 202399,202400,202552 and 241549 Work Plate,for 241543

Work Plate,complete,Nos.200019E,202622, 213856,213860,241542 and four 200189C Thread Guide Roller; for 241546

Bracket,for 241546 Thread Guide complete,Nos.200292F,241544

and 241545

Take-up Lever,for 241540 Hook Bevel Gear Socket,H teeth

Hook Bevel Pinion,2fl teeth,with two 200370C

Needle Bar Bushing, for 2416'76 Arm Cap with two 24407l,for 241567 Arm Cap and Spool Holder complete,Nos.

20:30>?0,241566 and two 200585H

Hook 221214 with 201253F,201376F and 241604,for 241679

Hook Gib,for 241602 Foot Lifter 3pring

Needle Bar with 200141F,for 241572', Hook(sewing),for 241671

Needle Bar Bushing 241557 with 241669 Bobbin Case Oiling Felt,for 241676

Retainer, for 211676

Bobbin Case Cap with 200594C,200984C, 235771,241674,241675 and two 350405C Bobbin Case complete,Nos.2'35769 and

24167G,for 241679

Hook and Bobbin Case complete,Nos.241602 Gnd 2<11677

Arm with 202135 Bed

Feed Dog Lever Post Cover (front)

Y~ife Driving

cam

with two 200394C Lever (upper) Locking Plung- er,for 241741

YJ1ife Drivin;~ Lever (upper) Locking Plunger Spring,for 241741

Thread Retainer (lower) Bracket with 202lOB,for 241728

Thread Retainer and Bracket complete,

Nos.2?~7ll,241727 and two 200583H Throat Plate Body,for 241731 and 241982

Needle Plate,56 elongated needle hole,for needle sizes 12 and 13, (minimum trimning margin.045 inch) for 241731

No.

241731

241732 241733 241 '734

•241735 241736 241737 241738 241739 241740 241741 241742 241743 241744 241745 241746 241747 241748 241749

241750

241751 241752 241753 241755

NUMERICAL LIST OF PARTS Plate

17637

N8.!M

Throat Plate comp1ete,56 elongated need- le hole, for needle sizes 12 and 13 Nos.241729,241730 and two 2005870 fo;

17630 17630 17629 17630 17629 17630 17630 17630 17630 17630 17630 17630 17630 17630 17630 17637 17637

17637

17629 17630 17633 17633

212637 •

Edge Guide

.

" Bracket

Hook Post " Stop Ball Retainer Knife Driving Lever (lower) with 200048C

and 241752,for 241739

Knife Driving Lever (lower) Guard

" " " " Shaft

Knife Driving Lever (lower) complete, Nos.l04D,24173 and 241736

Knife Driving Lever (upper) with 200048C for 241741

Knife Driving Lever (upper) complete Nos.20l725D,241?20,241?21 and 241740 Knlte Lever

• Shaft

" Spring

Switch-in Lever with 200061C

" Bwi tch-out Lever

" Plunger

Throat Plate Body,for 241750

" Needle Plate, 50 elongated needle hole,for needle sizes 16 and 18,for 241750

Throat Plate comp1ete,50 elongated need- le hole,for needle sizes 16 and 18, Nos.241748,241749,and two 200587D,for 212637

Knife Guard

Driving Lever Fork,for 241736 Face Plate

Thread Lubricator 011 Pad (felt), for 241760

241756 17633

Thread Lubricator 011 Pad Holder, for 241760

241758 241759 241760

17633 17633 17633

Thread Lubricator Oi1 Reservoir, for 241760

Thread Lubricator Oil Wick,for 241760 Thread Lubricator complete,Nos.214838,

240439,241755,241756,241758, 241759 and 350280F

241763 17630 Edge Guide Bracket Hinge Screw Set Screw Packing (brass)

241904 17636

Roller Presser Arm 203426 with 351821

·---

From the library of: Superior Sewing Machine & Supply LLC

·i I . i

34 No.

241981

241982

242117 244006 244048 244049 244061 244062

244063 244071 259266 259267 259268

259269 Plate 17637

17637

17632 17634 17632 17632 17632 17632

17623 17623 17640 17640 17640

17640

NUMI:RICAL LIST OF PARTS Name

Throat Plate Needle Plate (beveled) 56 elongated needle hole,ror needle sizes 12 and 13, (m1n1nnun trimming margin .045 inch),!or 241982

Throat Plate (beveled) complete,S6 elongated needle hole,ror needle sizes 12 and 13,Nos.241729, 241981 and two 200587D,!or 221254

Thread Controller Spring Stop

Presser Bar Lifting Releasing Lever Bracket

Tension Disc (back),ror 244062 (!ront),!or 244062 Release Washer,ror 244C62

Tension complete,Nos.200625F,201572B, 202407,202410,244048,244049,244061 and 263106

Balance Wheel (disc) (belt groove 2-1/8 in.diam.) with 200328C and 200335C Arm Cap Oil Wick,!or 241566

Honing Device Kni!e Holder Clamp, tor 259268

Honing Device Kni!e Holder Clamp Base,

!or 259268

Honing Device Kni!e Holder Clamp Base 259267 with 771J,l359J,36006,41544, 259266,259269 and 259284,!or 259283 Honing Device Kni!e Holder Clamp Spring,

ror 259268

Nos.259270 to 259272,!or 259273 259270 17640 Honing Device Kn1!e Hone

259271 17640 " . Clamp

259272 17640 Holder with two

215057

259273 17640 Honing Device Knl!e Hone Holder 259272 with 259270,two each 200466B and 25927l,!or 259283

Nos.259274 to 259277,!or 259282

259274 17640 Honing Device Kni!e Hone Holder Guide

259275 17640 " Col-

lar

259276 17640 Honing Device Kni!e Hone Holder Guide Collar Yoke

259277 17640 Honing De~ice Kni!e Hone Holder Guide Collar Yoke Hinge Screw Bushing 259281 17640 Hon1 ng Device Base with 457C and two

899D,!or 259282

259282 17640 Honing Device Base 259281 with 674D,721D 259274 to 259277,259309,259310, 350372C and 350373J,!or 259283

No.

259283

259284 259309 259310

Plate 17640

17640 17640 17640 263106 17632 264718 17631 350104C 17635 350164C 17631 350238D 17632 350280F 17633 350372C 17640

350373J 17640 350405C 17627 351821 17636

NUMI:RICAL LIST OF PARTS 35 Name

Honing Device comp1ete,Nos.259268,249273 259282,Form 2399W and three wood screws 1-1/2 in.,No.8 !or Horizontal Trirrrner Knives

Honing Device Kni!e Holder Clamp Washer,

!or 259268

Honing Device Kni!e Stop Pin (short),!or 259282

Honing Device Kni!e Stop Pin (long),!or 259282

Tension Spring Washer,!or 244062 Needle Bar Connecting Link Oil Guard Roller Presser Hinge Screw,ror 201926,

201951 and 201954

Needle Bar Bushing Set Screw

Thread Retainer (lower) Bracket Screw

" Lubricator Screw,!or 241760 Honing Device Kni!e Hone Holder Guide

Collar Yoke Hinge Screw Bushing Set Screw,ror 259282

Honing Device Knl!e Hone Holder Guide Thumb Set Screw,!or 259282

Bobbin Case Oiling Felt Retainer Screw,

!or 241676

Roller Presser,l-1/8 in.diam.,3/16 in.

race (!1ne),(!or use with beveled throat plates) with 1528J,l766C, 50553C and twenty-tour l6232,!or 241904

·--- -

From the library of: Superior Sewing Machine & Supply LLC

Genuine Singer Needles should be used in Singer Machines.

These Needles and their Containers are m .. rked with the Company's Trade Mark "SIMANCO."

Needles in Containers marked

"For Singer Machines"

are not Singer made needles. 2

From the library of: Superior Sewing Machine & Supply LLC

20157fB 202407

'(. ~

202473

17619- YJ

225382 225462

22546!

2102

~

"20149~

228026-0 2ooo8211--A

?.003tlOC

17620- V 3

227955

202784

414oO 225554

225498

I ₂₂₅₄₉₇

120342

I

~~L~~

..:::t

I ;,;

I /

N -~

i'- ,,

r".J 0 0

t () ~ \

( ) ( ) ( )

:\J (\J (\j

'--v---"

0 0' 0

.) . ) 1(\

..

t

!\)

17623- y ₃

0 l('\

~

"'

⁰ (_) (\J

I

/0

(") I

0 N

. -/r

1\J d _,

(\J -

_,-,

---<11:":7

===-

N

' tr:

" ' ' ~t <l) t-

(\j {\)

{\) 0

0 0

{\)

""

"

⁰

( )

Fl..

"'

"

C\J lJ

g"'

(\J . .

0 t) 0 t-

(\J o

,,J

I

~

^--

-- - - '

From the library of: Superior Sewing Machine & Supply LLC