• Nenhum resultado encontrado

Hardware Implementation of a Phase-Locked Loop for Communication Systems

N/A
N/A
Protected

Academic year: 2016

Share "Hardware Implementation of a Phase-Locked Loop for Communication Systems"

Copied!
4
0
0

Texto

Loading

Referências

Documentos relacionados

A sensibilidade para o diagnóstico de lesões em alça de balde no menisco medial diminuem para 45% a sensibilidade diagnóstica e, no menisco lateral a diminuição chega em cerca de

Reconhecidas as oportunidades de investigação associadas ao PLE, definiram-se os seguintes objetivos de investigação: (i) definir PLE, (ii) distinguir o conceito PLE de LMS

O objetivo deste artigo foi refletir sobre gênero e sexualidade a partir da leitura do corpo, tendo como foco a teoria do novo habitus. Inicialmente, fez-se uma

The input of the phase detector includes the input signal of the PLL and the output signal of the VCO, as shown in the Figure 3.2. Once the phase detector of the LPLL is a

Figure 5.6 – Inverter circuit for one phase. In each phase, the high/low outputs from the Arduino board are connect- ed to the device O1/O2 which is an optocoupler. It is composed

Phase difference between differential output signals, “Type II” excitation..

The application of a chemical-theory-based Gibbs energy equation in the modeling of phase equilibrium data of aqueous two-phase systems is presented.. The model is based on

The net result is the transport of silver ions from the aqueous donor phase to the aqueous acceptor phase across the bulk of the organic phase (the membrane). It should be noted