• Nenhum resultado encontrado

Solutions for Energy Efficient and Sustainable Heating of Ventilation Air: A Review

N/A
N/A
Protected

Academic year: 2017

Share "Solutions for Energy Efficient and Sustainable Heating of Ventilation Air: A Review"

Copied!
14
0
0

Texto

Loading

Imagem

Fig.  1.  Types  of  heat  exchangers  available  for  heat  recovery.
Fig.  2.  Test  system  for  efficiency  analysis  of  total-heat  recovery.
Fig. 4. Earth-to-air heat exchangers: (a) open-loop mode and  (b) closed-loop mode. Reproduced from [41]
Fig. 6. Configurations of a (a) ventilated double window (reproduced  from (J.S. Carlos, Heat recovery versus solar collection in a ventilated  double window, 2012)) and (b) unglazed perforated solar air pre-heater  (reproduced form (S
+5

Referências

Documentos relacionados

In this study, a numerical research of natural convection in single-sided and cross ventilation is developed using the inite volume method, taking account the internal heat

The idea was to determine the distribution of temperature, heat flux, thermal gradient, cooling curves in the cast metal, and heating or/and cooling in the molds

guidelines suggested limits of indoor pollutants, established cleaning methods for heating, ventilation and air-conditioning (HVAC) systems, indicated emission sources of pollutants,

Firewood furnace heating provide no homogeneous distribution of temperature, heat flow, pressure and heated-air speed inside the tested poultry facility.. Heat convection cells

Excessive heat flow, conditioned by emersion of low-temperature fraction within the Caucasus and before subduction front at the expense of friction heat and partial melt of rocks

Quando questionados a respeito da utilização de métodos alternativos de controle de pragas e ervas daninhas, obteve-se o percentual de 100% que afirma não

A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS). Renewable and Sustainable Energy

Therefore, after analyzing what was the best method to find a better solution in short runtime, it was used a constructive heuristic, using the shortest path, and a meta- heuristic