Design and Development of Broadband Inverted E-shaped Patch Microstrip Array Antenna For 3G Wireless Network

Lacava: “ Design of Arrays of Linearly Polarized Patch Antennas on an FR4 Substrate: Design of a probe-fed electrically equivalent microstrip radiator” , IEEE Antennas

The three proposed antennas are simulated using Sonnet software, under the same conditions and results compared with the conventional rectangular patch antenna, and the shape with

For a cavity-backed antenna element and for a semi-finite array of 4 cavity-backed antenna elements in the finite direction, the dependence of the input impedances on the unit

De- sign of smart antenna systems combines the technologies of antenna design, signal processing, and hardware implemen- tation.. In this paper, a propose of smart antenna structure,

the paper is organized as follows: Section II explains the design procedure of an aperture coupled microstrip patch antenna (ACMPA) covered by EBG structure and section III

In this paper,study and survey of microstrip antenna elements is presented, with emphasis on theoretical and practical design techniques and material used, as

In this paper, an attempt has been made to reduce the size of microstrip antenna, with improved bandwidth, gain without any complexity in design by using inverted patch

Figure 7 shows return loss for proposed antenna and 3-D radiation pattern of hybrid coupled microstrip rectangular patch antenna is shown in Fig.. 8 and it is