Comparison Contour Extraction Based on Layered Structure and Fourier Descriptor on Image Retrieval
Texto
Documentos relacionados
Feature extraction is done in the following way; For approach1, image for which the feature vector is to be calculated is splited into R, G and B color components and for each
The method is based on layered structure representation that be obtained from measurement distance and angle of numerical data to the centroid data and based
We have maintained the separate feature vector database for each type of feature vector based on the type of moment calculated for three color intensities and we have obtained
The structure of the remelting zone of the steel C90 steel be- fore conventional tempering consitute cells, dendritic cells, sur- rounded with the cementite, inside of
Remelted zone of the probes after treatment with current intensity of arc plasma – 100 A, lower bainite, retained austenite and secondary cementite.. Because the secondary
The purpose of this Paper is to describe our research on improvement of feature extraction and matching technique for more precise and accurate Content Based
It has a center object marked in red with another 29 objects, the spiral web is built with 50 rings and 16 zones based on the diameter of center object that is the reference
The perispore is three-layered in section: the inner layer is adhered to the exospore, the middle layer is formed of a three-dimensional network of threads and the outer layer is