• Nenhum resultado encontrado

Finite Element Analysis based Optimization of Magnetic Adhesion Module for Concrete Wall Climbing Robot

N/A
N/A
Protected

Academic year: 2017

Share "Finite Element Analysis based Optimization of Magnetic Adhesion Module for Concrete Wall Climbing Robot"

Copied!
11
0
0

Texto

Loading

Referências

Documentos relacionados

The purpose of this work is to present a three-dimensional beam element for the structural and thermal analysis of reinforced concrete, steel and composite steel and

Based on validation of the linear and non-linear finite element code for the reinforced concrete beam and the finite element interface developed code, the application of the

It must be underlined that in the air gap of the IPA there are the effects of two sources of magnetic flux: the first one is a result of the travelling magnetic field produced by

(a) Shape of the magnetic flux distribution produced by the Halbach array in the linear motor obtained by numerical analysis; (b) and (c) graphs of the y -component of magnetic

The adhesion force between the particles of the powdery inorganic materials used in these experiments and the surface of the stainless steel disc increased with increasing

Abstract. The intensive investigation of structural behavior of cylindrical concrete shell is carried out by using finite element method of analysis. The linear elastic analysis

Finite element analysis was con- ducted on the steel tray platform, and kinematic analysis was performed on the end of novel arm-type single stereo parking lot.. As a result,

OBJECTIVE: This study provides an experimental and finite element analysis of knee-joint structure during extended-knee landing based on the extracted impact force, and it