• Nenhum resultado encontrado

Influence of Gas Flow Rate on the Deposition Rate on Stainless Steel 202 Substrates

N/A
N/A
Protected

Academic year: 2017

Share "Influence of Gas Flow Rate on the Deposition Rate on Stainless Steel 202 Substrates "

Copied!
6
0
0

Texto

Loading

Referências

Documentos relacionados

In this work, we have deposited good quality Zn(O,OH)S thin films by the CBD method on two different substrates, and the Avrami-Erofeev equation was used to study growth rate

Taking into account the remarkable obtained results when different kinds of materials (such as stainless steel, zirconium oxide, tempered steel or tungsten carbide) have been used

Nanostructured undoped zinc oxide (ZnO) thin films were deposited using atmospheric pressure chemical vapor deposition (APCVD) on glass substrates using zinc acetate dehydrate [C 4 H

It was prepared a selective surface composed of black chromium (Cr/Cr 2 O 3 ) deposited on substrates of AISI 304 stainless steel using the technique of electrolytic deposition for

On opening up their field of research to the empiric analysis of mass communication phenomena and to a set of other areas with a focus on the contexts and means

Em seus resultados, quando comparados ao exercício de baixa intensidade com e sem restrição de fluxo sanguíneo, foi observado menores valores PAS, pressão

Influence of the grain size on deleterious phase precipitation in superduplex stainless steel UNS

Analysis of the friction surfacing process applied in a CNC machining center for deposition of austenitic stainless steel on carbon steel substrates. In: Proceedings of the