Technical Note: Feasibility of CO<sub>2</sub> profile retrieval from limb viewing solar occultation made by the ACE-FTS instrument
Texto
Imagem
Documentos relacionados
light path lengths in the respective layers are modeled with the RT model, the inversion of the targeted trace gas vertical profile from measured dSCDs is performed using
Assim como airma Neville Keynes (1891, apud Friedman, 1953), ela é responsável em lidar com “o que é”, não com “o que deve ser” e seu objetivo con- siste em gerar um sistema
Model estimated CO 2 time series at two surface stations in the southern extra-tropics, compared to CO 2 measurements taken at those stations.. The “GOSAT” line is from an
For this reason, the remaining test scenarios are used to estimate the sensitivity to aerosol, cloud micro and macro physical parameters which are not part of the state vector but
Column measurements can be used to quantify the emission flux/production rate from an area source by driving around the source or driving up- wind and downwind of that source area..
It appears from the figure that the length of previous solar cycles increases when the peak sunspot number decreases indicating a characteristic variation of solar activity with
The structure of the remelting zone of the steel C90 steel be- fore conventional tempering consitute cells, dendritic cells, sur- rounded with the cementite, inside of
We also present a relative limb correction scheme (RLC), where the limb data is “corrected” for the ref- erence sector (RS), analogue to the nadir RSM, and just the