Enhancement of Natural Convection Heat Transfer from Perforated Fin

The utilized numerical procedure for de- termination of heat transfer processes in the TES is very sensitive to the storage material thermo-physical properties, hence the exact

Fig. Homogenized heat transfer coefficient for 10.. 3) For small size of the inclusions a 1 and various values of heat transfer the equivalent heat transfer parameter

Abstract - This study analyzed the influence of the following parameters: overall volumetric heat transfer coefficient, coefficient of heat loss, drying rate, specific heat of

Experimental and simulation results showed that the thermal performance of nanofluids is higher than that of the base fluid and the heat transfer enhancement increases with

Plain fins require a smaller flow frontal area than interrupted surfaces (i.e. offset strip fins and louvered fins) for given values of heat duty, pressure drop, and flow rate, but

This cell is more intense compared to the case of the injection mode (Fig. The corresponding isotherms are more tightened at the level of the heated vertical wall indicating a

Abstract – Surface wettability is one of the mechanisms responsible for the enhancement of pool boiling heat transfer. This work investigates the effect of

9 shows the plot of heat transfer coeicient and Reynolds number for pure water and diferent volume concentration of CuO nanoparticles in water, indicating the enhancement is