• Nenhum resultado encontrado

Low Loss Photonic Switch Based Routing (PSBR) Design for Photonic Topology

N/A
N/A
Protected

Academic year: 2017

Share " Low Loss Photonic Switch Based Routing (PSBR) Design for Photonic Topology"

Copied!
13
0
0

Texto

Loading

Referências

Documentos relacionados

As seções “Artigo 1: Compact optical switch based on 2D photonic crystal and magneto-optical cavity” a “Artigo 6: Multifunctional two-dimensional photonic crystal optical

The effect of nano geometry of the photonic crystal in tungsten on the selectivity of the absorber was investigated first, including period (L), aperture (A) and depth (d).. A

Index Terms — Dispersion Compensation, Photonic Crystal Fiber, Refractive Index, Confinement

protective mechanisms to shield photobionts from excessive levels of illumination. The highest mountain, Pico Ruivo, rcaches 1860 m, significantly lower than Pico but

Based on these lineage trees, we can assess the clonal connection among differentiated cells, measure the cell cycle length, evaluate the mode of cell division based on

In this routing protocol, each mesh router rapidly finds out multiple paths based upon hop count metric to the Internet gateways by routing protocol designing.. Each mesh

Topology Based routing approach has Route instability, this is because an established route consists of a set of nodes between the source and the destination that are affected

Routing is the critical issue in the MANET and focus based on routing protocols such as Ad hoc On-demand Distance Routing Protocol (AODV), Dynamic Source Routing (DSR),