• Nenhum resultado encontrado

Influence of thermo hydrogen treatment on microstructure and mechanical properties of Ti-5Al-2.5Sn ELI alloy

N/A
N/A
Protected

Academic year: 2017

Share "Influence of thermo hydrogen treatment on microstructure and mechanical properties of Ti-5Al-2.5Sn ELI alloy"

Copied!
4
0
0

Texto

Loading

Imagem

Fig. 4: TEM images of Ti-5Al-2.5Sn ELI alloy with 0.515wt.% hydrogenThe average size is 650 μm
Fig. 6:  Impact energy of Ti-5Al-2.5Sn ELI  alloy as a function of hydrogen  concentration

Referências

Documentos relacionados

The severe plastic deformation process using HPT proved to be an effective way of refining the microstructure of Ti-6Al-7Nb alloy, enhancing mechanical properties, manifested by

The literature reported that Ti-Ni shape memory alloys can also absorb hydrogen because Ti has high affinity for hydrogen and the addition of Ni accelerates hydrogen absorption

In order to observe the efect of growth velocity and Fe content on microstructure and mechanical properties of Al–1.9Mn–xFe alloys, eutectic rod spacings, microhardness and

Basing on the results of MANOVA test it has been observed that the strongest significant effect on an increase of the tensile strength R m exerted the addition of Mg, followed by

His research interests mainly focus on TiAl alloy preparation; microstructure and mechanical properties of bulk nanostructured and ultraine grained Ti based alloys and

Mechanical behavior of the Ti-35Nb-7Zr-5Ta specimens: (a) representative tensile stress-strain curves of solution treated (ST) and cold rolled plus 20 min aged (CRA-20) specimens;

Hydrogen production by thermo catalytic decomposition of methane on Ni-based catalysts: influence of operating conditions on catalyst deactivation and carbon characteristics.

The probability of attending school four our group of interest in this region increased by 6.5 percentage points after the expansion of the Bolsa Família program in 2007 and