• Nenhum resultado encontrado

Stepped impedance microstrip low-pass filter implementation for s-band application

N/A
N/A
Protected

Academic year: 2016

Share "Stepped impedance microstrip low-pass filter implementation for s-band application"

Copied!
8
0
0

Texto

Loading

Referências

Documentos relacionados

Optimal Design of Double Folded Stub Microstrip Filter by Neural Network Modelling and Particle..

A novel 3 rd order WLAN U-band pass filter with two transmission zeros for sharp transition band using DGS, coupling matrix and multilayer technique has been

that realizes the impedance matching between the impedance of the feeding line built in microstrip line technology and the impedance of the component built in Substrate

‘‘Novel compact elliptic -function narrow-band band pass filters using microstrip open- loop resonators wit h coupled and crossing lines,’’ IEEE Transactions on

It is made of stepped impedance lines and a composite right/left handed- transmission line (CRLH-TL) constructed with capacitive gap in conductor strip and a

The determination of the band-pass filter - which involves the selection of signals from a band of frequencies, thereby blocking signals from frequencies above and below the limits

Microstrip Hybrid Coupler with a Wide Stop- Band Using Symmetric Structure for

The filter system for fluorescence evaluation included a band pass filter (420-490 nm) and an emission filter with cut off at 515 nm. The excitation light passed through the