• Nenhum resultado encontrado

A Microstripe Slotted Patch Antenna Using Amc

N/A
N/A
Protected

Academic year: 2016

Share "A Microstripe Slotted Patch Antenna Using Amc "

Copied!
5
0
0

Texto

Loading

Referências

Documentos relacionados

4 shows the comparative results for return loss as a function of resonance frequency of FR-4 substrates, using superconductor for two and three elements of the antenna array, at

A simple configuration of the rectangular microstrip antenna allows operating a system of satellite communication in two bands.. The configuration consists of a

The computer simulation results show that the antenna can realize wide band characters with each band having good impedance bandwidth (VSWR ≤ 2) for all the three

A dielectric analysis with proposed antenna shows that increase of stub length for fixed width improves the bandwidth by about 3 to 4% and return loss of second resonance

The three proposed antennas are simulated using Sonnet software, under the same conditions and results compared with the conventional rectangular patch antenna, and the shape with

the paper is organized as follows: Section II explains the design procedure of an aperture coupled microstrip patch antenna (ACMPA) covered by EBG structure and section III

In this paper,study and survey of microstrip antenna elements is presented, with emphasis on theoretical and practical design techniques and material used, as

In this paper, an attempt has been made to reduce the size of microstrip antenna, with improved bandwidth, gain without any complexity in design by using inverted patch