Finite Element Analysis of Wheel Rim Using Abaqus Software
Texto
Documentos relacionados
The results of quantitative phase XRD analysis of the Nd-rich Nd14Fe79B7 alloy in the optimized magnetic state (Fig. 2.a, Table 1) suggest that the alloy has almost
A numerical model using the Finite Element Method (FEM) for the nonlinear static and dynamic analysis of reinforced concrete (RC) beams, plates and shells is presented in this
In this work, samples of AA7050 aluminium alloy with and without titanium addition that were produced by mechanical alloy- ing and hot extrusion were submitted to solution
This paper presents results on the tensile testing of AZ31B-H24 magnesium alloy and 6111-T4 aluminium alloy at different strain rates. These materials are strong candidates for use
Figure 3. Phase-Field calculation of the effect of boron addition on dilute Fe-C alloy: a) FeC alloy; b) FeCB1 alloy; and c) FeCB2 alloy... The effect of boron addition on
Keywords: AZ31 magnesium alloy, finite element modeling, grain refinement, dynamic recrystallization, extrusion load, effective stress, temperature
The objective of this work is to provide a reliable numerical model using the finite element method (FEM) for the static and dynamic analysis of reinforced concrete (RC)
The purpose of this work is to present a three-dimensional beam element for the structural and thermal analysis of reinforced concrete, steel and composite steel and