Implementation of Line Stability Index for Contingency Analysis and Screening in Power Systems
Texto
Documentos relacionados
It has been observed that, aside of the power flow control characteristic and line voltage support, the series connected VSC-based devices considered (SSSC and UPFC) could be
The response of the PI controller plant model for a real demand curve presents a behavior within the stability criteria for this type of power plants and the mechanical power
In order to develop a method for the analysis of coconut water, plasma power and nebulization flow rate were optimized.. Using 1.3 kW of plasma power
Although the efficiency of the local search method can be improved by using a set in which the variables representing the installation descision are fixed, the calculation time
The use of running test protocol to evaluate anaerobic power performance in Wingate test in the current study did not determine peak power, mean power and fatigue index for RAST
µ-based UPFC controller synthesis: The main goals of the UPFC controller design are: Power system oscillation damping, DC-voltage regulator and power flow
At the first stage of the measurements results analysis, the gear wheel cast surface image was compared with the casting mould 3D-CAD model (fig.. Next, the measurements results
To address this problem, in this research an optimization approach, based on the Genetic Algorithms (GA) method is proposed for the design of UPFC controllers (power-flow