• Nenhum resultado encontrado

Electrochemical behavior of H3PW12O40/ acid-activated bentonite powders

N/A
N/A
Protected

Academic year: 2017

Share "Electrochemical behavior of H3PW12O40/ acid-activated bentonite powders"

Copied!
10
0
0

Texto

Loading

Imagem

Table 1. Main crystallographic parameters measured on the (001)  basal reflection of XRD patterns for acid activated bentonite and  samples modified with various loading of HPW
Table 2. Pore structure parameters for acid activated bentonite  and samples modified with various loading of HPW
Table 3. Fractal dimensions (D), RMS surface roughness, Rq,  and average surface roughness, Ra, for acid activated bentonite  and samples modified with various loading of HPW
Figure 4c) with the mean peak potential,  E 1/2 , at 0.04,  -0.21 and –0.33 V, respectively
+4

Referências

Documentos relacionados

The probability of attending school four our group of interest in this region increased by 6.5 percentage points after the expansion of the Bolsa Família program in 2007 and

TABLE 1 - Analysis of variance comparing stem diameter (SD), plant height (PH), longest root length (LRL), shoot dry mass (SDM), root dry mass (RDM) and RDM:SDM ratio in tamarind

The Increase of Surface Area of a Brazilian Palygorskite Clay Activated with Sulfuric Acid Solutions Using a Factorial Designc.

the activated samples paralleled the severity of the acid treatment, and the dehydroxylation temperature decreased with an increase in the acid/clay ratio (Figure 3b-f); this

Figure 2 presents results on the comparison of the electrochemical behavior of PB modified electrodes prepared in the absence (PB) and presence (PB-CTAB) of CTAB in

Both the natural and activated clays promoted the esterification of phenylacetic acid with methanol more efficiently than those of other carboxylic acids. This result may

We created a novel electrochemical sensor for sildenafil citrate and acetaminophen detection using a modified glassy carbon electrode with a film of RuQT compound. The film on