Particle backscatter and relative humidity measured across cirrus clouds and comparison with state-of-the-art cirrus modelling

Consistency of transport between the trajectory-box model CAABA/MJT and the 3-D EMAC model is achieved via calculation of trajectories based on 3-D wind fields from EMAC.. The

The structure of the remelting zone of the steel C90 steel be- fore conventional tempering consitute cells, dendritic cells, sur- rounded with the cementite, inside of

Fractures were made in all samples. Figure 1 shows fractures of test bars cast from the examined high-aluminium iron in base condition and with the addition of vanadium

The probability of attending school four our group of interest in this region increased by 6.5 percentage points after the expansion of the Bolsa Família program in 2007 and

The three dimensional model used finite solid elements, with eight nodes and three degrees of freedom in each node (translations). The dimension of the mesh was defined based

atrium with cirrus everted ( C ) and the transversal striations and ridges of the tegument ( arrows ). e) SEM showing the cirrus pectinate spines ( S ) in detail and pointed spines

Abstract A fuzzy linguistic model based on the Mamdani method with input variables, particu- late matter, sulfur dioxide, temperature and wind obtained from CETESB with

According to this test, with the time and the test temperatures for a slag with pre-established particle size and humidity, a model can be obtained to estimate its maximum