Computational Simulation of Fuel Nozzle Multi Holes Geometries Effect on Direct Injection Diesel Engine Performance Using GT-POWER
Texto
Documentos relacionados
The results indicate that the increase of biodiesel in mineral diesel reduces torque and power, increases the specific fuel consumption and practically does not change the
Due to the need to know the actual situation of engines performance in the new agricultural tractors, the following research aimed to compare the torque and maximum engine
Table 1 - Engine performance parameters (torque, power, specific fuel consumption and thermal efficiency) in different speeds for the four evaluated configurations.. One can
Using Taguchi method and ANOVA the percentage contributions of the effect of parameters-speed, load, injection timing plunger diameter, nozzle valve opening
Performed tests have shown that application of phosphorus in form of CuP10 and AlSr10 master alloy as an inoculant gives positive results in form of refinement of primary crystals
for all pollutants except sulfur dioxide in the low engine power engineering vessel were significantly higher than that of the previous studies, while for the two higher engine
The same mesh was later used to perform a simulation with a defined needle lift curve (and hereby the mesh movement) and inlet and outlet pressure1. In next few steps we
Assim, segundo o resultado dos pesos canónicos, de modo a obter-se uma redução dos Custos Recolha Vidro (variável mais explicada), em situações em que o crescimento