Effect of the addition of soy lecithin and Yucca schidigera extract on the properties of gelatin and glycerol based biodegradable films
Texto
Documentos relacionados
Fractures were made in all samples. Figure 1 shows fractures of test bars cast from the examined high-aluminium iron in base condition and with the addition of vanadium
The use of glycerol as plasticizer produced films with maximum of 52.3% and 41.2% of elongation, when associated with yucca extract and lecithin, respectively (Table 1), being
The mechanical properties of the films produced with cassava starch, PBAT and the different types of glycerol are presented in Table 2.. The tensile strength of the films ranged
Electrodeposition of Gold Films from a Glycerol Solution on Carbon Paste Electrode and the Effect of Chemical and Electrochemical Parameters of Electrodeposition on the
The structure of the remelting zone of the steel C90 steel be- fore conventional tempering consitute cells, dendritic cells, sur- rounded with the cementite, inside of
social assistance. The protection of jobs within some enterprises, cooperatives, forms of economical associations, constitute an efficient social policy, totally different from
The probability of attending school four our group of interest in this region increased by 6.5 percentage points after the expansion of the Bolsa Família program in 2007 and
Zein oleic acid films added with 1, 2 and 3% (w/w) of nanocarbonate and 30% glycerol as plasticizer, were produced and evaluated according to their structure and