A Practical Method of BLDCM Based on High-precision Estimation of the Rotor Position
Texto
Imagem
Documentos relacionados
After determining the first critical rotor speed, the operating parameters such as rotor speed, dispersed phase and continuous phase flow rate varied to investigate the effect of
The efficacy of 28 individual or blended disinfectants against avian Salmonella enterica serovar Enteritidis and Escherichia coli strains was determined.. An in vitro test
The probability of attending school four our group of interest in this region increased by 6.5 percentage points after the expansion of the Bolsa Família program in 2007 and
The method used nowadays is based on the colorimetric determination of the complex formed between Fe(lll) and thiocyanate after extraction to organic phase 2.. This method can also
Fractures were made in all samples. Figure 1 shows fractures of test bars cast from the examined high-aluminium iron in base condition and with the addition of vanadium
social assistance. The protection of jobs within some enterprises, cooperatives, forms of economical associations, constitute an efficient social policy, totally different from
Therefore, based on the direction control signal and frequency-altering step pulses signal, the output position of linear actuator is controlled to track the position of the
There are two different techniques employed in thoracentesis with the use of ultrasound: the landmark-based method, in which ultrasound is used in order to identify the best site