Stress and Deformation Analysis in Base Isolation Elements Using the Finite Element Method

This paper has successfully used the finite element method for the simulation and analysis of micro LED packaging structure heat transfer and thermal stress concentration location at

types of finite elements: a plate element for nonlinear analysis of the concrete slab; a bar element for non-linear analysis of beams with cross- section defined by a polygon; and

In this paper will be presented: the strength criterion proposed by Johansen, the elasto- plastic analysis of plates using finite element method and mathematical programming,

The finite element mesh used in the analysis is shown in Figure 23 and it is formed by 1380 8-node hexahedral finite elements for modeling the pile and cap, 15816 8-8 node

In this research, two stress-based finite element methods includ- ing the curvature-based finite element method (CFE) and the curvature-derivative-based finite element method

In order to investigate the influence of the stacking sequence on the dynamic behavior of the components, experimental and numerical analysis using the Finite Element Method have

Geometrically nonlinear static and dynamic behaviour of laminate composite shells are analyzed in this work using the Finite Element Method (FEM).. Triangular elements with

específicos, nós não tivemos, nós chegamos com embasamento nenhum”. Essa fala nos ajudou a compreender que certas visões limitadas para a heterogeneidade e especificidades