Influence of radiative heat and mass transfer mechanism in system “water droplet-high-temperature gases” on integral characteristics of liquid evaporation

Rodriguez (1998) studied the influence of particle diameter and solid particle mass flow rate on the bed-to-tube heat transfer coefficient in a shallow fluidized bed heat

Abstract - In this work, the effects of electrical double layer (EDL) near the solid/ liquid interface, on three dimensional heat transfer characteristic and pressure drop of

The aim of this research was to determine variations in temperature and moisture content in leaves and twigs in yerba maté at the heat treatment step, using heat and mass

In the present work the inverse problem of simultaneous heat and mass transfer modeled by Luikov equations is studied using a hybrid combination of the

Based on the experimental study, this paper presents the effect of mass flow rate of water, and its inlet temperature for various inclination angles of heat@pipes on heat

One of the main objectives of this study was to associate the influence of run-off and leaching as pathways of pesticide contamination into surrounding water bodies on

Motivation of investigating the influence of the number of finite elements on the results of sensitivity analysis was finding out whether the selected method depends of the

Mathematical modeling of processes heat and mass transfer inoculator in melts allows you to identify peculiarities of the technological process, and establish influence inoculator