• Nenhum resultado encontrado

Design of UWB Filter with Notch Band for WLAN (5.3-5.8 GHz) Signal Interference Rejection

N/A
N/A
Protected

Academic year: 2017

Share "Design of UWB Filter with Notch Band for WLAN (5.3-5.8 GHz) Signal Interference Rejection"

Copied!
9
0
0

Texto

Loading

Imagem

Fig. 2 Etched slot structure for notch band realization Filter
TABLE III. Variation of bandwidth of notch band with slot gap S1
TABLE IV.  Variation of bandwidth of notch band with line width W2
Fig. 6 Photograph of the fabricated UWB filter with WLAN notch
+4

Referências

Documentos relacionados

Runx1 (Runt-related transcription factor 1), a transcription factor that is essential for HSC emergence during the endothelial to hematopoietic cell fate conversion, but not

Abstract — In this article, equivalent circuit modeling with study and analysis of band notch characteristics for a triple band notched UWB antenna has been discussed

Ojaroudi, “A novel design of reconfigurable slot antenna with switchable band notch and multiresonance functions for uwb applications,” IEEE Antennas and Wireless

The formulas used to calculate the RY and RYT were based on those published by Hoffman and Buhler (2002): RYa = (p) (Amix/Amon), RYb = (1 - p) (Bmix/Bmon), and RYT = RYa + RYb,

Abstract — In this paper, a novel design of a compact planar ultra wide band (UWB) monopole antenna with triple band notched characteristics has been presented..

Measured frequency response of our proposed FSS design for different angles of incidence and vertical

1) ASTM is located in the first notch 10 , which means that AST in the second notch increases that much as a result of reduction of mucous component of NV, that AST of the first

Graphic - 3 power frequency band (0.05-0.15) blue signal power frequency band, red signal using a sliding window of 30 seconds and green signal using a window of 30 seconds. Graphic