Effect of T6 heat treatment on Microstructure and Mechanical properties of A356.2 alloy reinforced with RHA composites

Bakar revealed about the effect of a post-weld heat treatment (PWHT) on the mechanical and microstructure properties of an AA6061 sample welded using the gas metal

Analysis of the chemical composition, hardness and wear tests showed that the effect of bead overlapping on coating features is most pronounced in the first and second beads.

This article examines the effect of prolonged time of holding at the temperature of 620 0 C on the processes of secondary phase precipitation and mechanical properties of

Performed tests have shown that application of phosphorus in form of CuP10 and AlSr10 master alloy as an inoculant gives positive results in form of refinement of primary crystals

Water glass modification with the colloidal solution of ZnO nanoparticles in propanol confirmed the effect of modifier on the water glass wettability of sand

Making analysis of an impact of individual variables change on growth of the mechanical properties it should be noticed, that they impact in diverse way and with various „force” on

The inoculation of yttrium was found to enhance the grain refinement effect of Al-5Ti-1B grain refiner and improve the mechanical properties.. The optimal weight percentage

In this article dynamic mechanical properties of hemp fiber reinforced cellulose filled epoxy hybrid composites are described.. The effect of hybridization on the dynamic