Wind speed dependent size-resolved parameterization for the organic mass fraction of sea spray aerosol
Texto
Documentos relacionados
Table 4 shows a comparison of wind direction and horizontal and vertical wind speed from the AIMMS and the wind profiler, with the errors reflecting the spread of 1-min averaged
Then the recoverable power is proportional to the wind speed, but it is highly dependent to the dimensional characteristics of the wind turbine, including the
Melt No.. It allowed for the assessment of the influence of aluminium added in the quantity falling into the concerned range on both the graphitization of cast iron
At the first stage of the measurements results analysis, the gear wheel cast surface image was compared with the casting mould 3D-CAD model (fig.. Next, the measurements results
Annual mean emissions (2006–2010) of (a) sea salt aerosol and (b) primary marine organic matter (PMOM) in sea spray aerosol, (c) the mass fraction (in the dry diameter range of
The structure of the remelting zone of the steel C90 steel be- fore conventional tempering consitute cells, dendritic cells, sur- rounded with the cementite, inside of
The probability of attending school four our group of interest in this region increased by 6.5 percentage points after the expansion of the Bolsa Família program in 2007 and
Summing up, SAM program holds includes input parameters as sound speed profile, depth of the sea, locations of the source and destination, average wind speed, sea floor