The analysis of solidification process of ferritic-austenitic cast steel
Texto
Imagem
Documentos relacionados
The efect of ferrite phase on the precipitation of σ phase in a Z3CN20.09M cast austenitic stainless steel (CASS) used for primary coolant pipes of pressurized water reactor
For the Al-Si5Cu3 alloy the results obtained in this work confirm that cooling rates influence the nucleation and growth of α c -Al 15 (Fe,Mn) 3 Si 2 and β- Al 5 FeSi phases.
Abstract: As in ancient architecture of Greece and Rome there was an interconnection between picturesque and monumental forms of arts, in antique period in the architecture
Modeling of hypoeutectic alloys solidification is a complex problem, because increase of solid phase fraction is triggered by constitution of two structures: In
The iterative methods: Jacobi, Gauss-Seidel and SOR methods were incorporated into the acceleration scheme (Chebyshev extrapolation, Residual smoothing, Accelerated
Ao Dr Oliver Duenisch pelos contatos feitos e orientação de língua estrangeira Ao Dr Agenor Maccari pela ajuda na viabilização da área do experimento de campo Ao Dr Rudi Arno
Conceptual tools of the discipline were used to analyze four theoretical contributions: the proposal of Colette Soler of considering the appearance of object a in some dreams as
Analysis of the friction surfacing process applied in a CNC machining center for deposition of austenitic stainless steel on carbon steel substrates. In: Proceedings of the