Finite time exergoeconomic performance optimization of a thermoacoustic heat engine

Fig. Homogenized heat transfer coefficient for 10.. 3) For small size of the inclusions a 1 and various values of heat transfer the equivalent heat transfer parameter

Abstract - This study analyzed the influence of the following parameters: overall volumetric heat transfer coefficient, coefficient of heat loss, drying rate, specific heat of

Whilst turbulent model was shown to predict the velocity profiles for a flow with drive ratio higher than 0.45% better, the prediction of heat transfer is still not

They are reckoned by calculation of data concerning the production of heat in administrative area of Belgrade per inhabitant, then (according to the number of inhabitants) the value

The ATND method enables registration of solidification and crystallization curves of investigated alloy, and on base of it selection of heat treatment temperatures for

By considering losses of heat resistance, internal friction and bypass heat leakage, Liu et al [36, 37] established models of general irreversible quantum Carnot heat engines

[27], the absorbing heat flux and releasing heat flux of the fifth endoreversible Carnot heat engine can be obtained by using the heat transfer between the working fluid and

[39, 41], and the obtained results can be further applied to the investigations of optimal configurations for maximizing power output, investigations of optimal configurations