Experimental Investigation of Heat Transfer Effectiveness on Finned-Tube Thermoacoustic Heat Exchanger

Experimental investigation of heat transfer and friction factor characteristics of circular tube fitted with full-length square jagged twisted tape inserts of

Based on the experimental study, this paper presents the effect of mass flow rate of water, and its inlet temperature for various inclination angles of heat@pipes on heat

Fig. Homogenized heat transfer coefficient for 10.. 3) For small size of the inclusions a 1 and various values of heat transfer the equivalent heat transfer parameter

Rodriguez (1998) studied the influence of particle diameter and solid particle mass flow rate on the bed-to-tube heat transfer coefficient in a shallow fluidized bed heat

Abstract - This study analyzed the influence of the following parameters: overall volumetric heat transfer coefficient, coefficient of heat loss, drying rate, specific heat of

Khan [24] studied the heat transfer characteristics and pressure drop condition for a ammonia with 30 0 chevron angle in chevron type plate heat exchanger and

The obtained model is used to perform easier simulations of the studied system and gives the temperature evolutions of the heat transfer fluid and of the metal

Whilst turbulent model was shown to predict the velocity profiles for a flow with drive ratio higher than 0.45% better, the prediction of heat transfer is still not