• Nenhum resultado encontrado

Hardware implementation of smart antenna systems

N/A
N/A
Protected

Academic year: 2017

Share "Hardware implementation of smart antenna systems"

Copied!
4
0
0

Texto

Loading

Imagem

Fig. 1. Functional block diagram of a Smart Antenna System (Ja- (Ja-cob, 2003).
Fig. 2. Normalized spectra of MUSIC (solid), Capon (dashed), and beamforming (dash-dotted) methods
Fig. 3. Structure of the Receiver.

Referências

Documentos relacionados

In this paper, we present the physical layer secrecy performance analysis of single- input single-output (SISO) systems consisting of single antenna devices, in the presence of a

In this paper, we have proposed a unified PARAFAC-based modeling approach for the received signal of three multiuser wireless communication systems em- ploying an antenna array

Abstract —This paper discusses the design of multiple- input–multiple-output (MIMO) antenna systems and proposes a genetic algorithm to obtain the position and orientation of each

“ Cyber-physical systems (CPS) are smart systems that have cyber technologies, both hardware and software, deeply embedded in and interacting with physical

Index Terms — backfire antenna, end-fire antenna, long backfire antenna, surface wave, surface-wave antenna, surface-wave structure.. Ehrenspeck and his associates at the

Here, the width of the ground plane of proposed tree–type fractal antenna has been optimized and its effect on the antenna bandwidth has been observed.. The proposed antenna has

Here, the width of the ground plane of the proposed fractal monopole antenna is varied and its effect.. on the antenna bandwidth

The characteristics of the antenna sys- tem design with respect to the antenna-plasma coupling and plasma wave excitation for different phasing of the feeding currents