Design and Modelling of Fuzzy and Model Predictive Controllers for STATCOM to enhance Transient Stability of Power System
Texto
Imagem
Documentos relacionados
In the construction of this amplifier, microphone preamplifier, tone preamplifier, equalizer, line amplifier, output power amplifier and sound level indicator are
µ-based UPFC controller synthesis: The main goals of the UPFC controller design are: Power system oscillation damping, DC-voltage regulator and power flow
Results: Simulation results showed that the use of intelligent fuzzy logic and nero-fuzzy controller improved the data transmission rate and decreased long delay when compared
It was presented three ways to work with the Fuzzy controller, namely: (a) Fuzzy supervisory controller of the gain matrix of the LQR control ( G ), (b) Fuzzy controllers in an
A control architecture, consisting of a linear PID joint controller with model predictive feed-forward compensation for mobile base motions and interactive-force disturbance
The response of the PI controller plant model for a real demand curve presents a behavior within the stability criteria for this type of power plants and the mechanical power
The relative devaluation of a parliamentary background in ministerial careers is undoubted- ly related to the elevated number of technocrats and independents having little
Figure 7 illustrates the mathematical model block diagram of the system with the fuzzy controller for the PI and PD architectures by LI & GATLAND (1996), and kp