• Nenhum resultado encontrado

Effect of Overageing Conditions on Microstructure and Mechanical Properties in Al–Si–Mg Alloy

N/A
N/A
Protected

Academic year: 2016

Share "Effect of Overageing Conditions on Microstructure and Mechanical Properties in Al–Si–Mg Alloy"

Copied!
5
0
0

Texto

Loading

Referências

Documentos relacionados

The purpose of the present work is to improve the mechanical properties (elongation % and strength) of the hypereutectic Al-Si alloy using rapid solidiication, addition

Effect of the temperature gradient, growth rate, and the interflake spacing on the microhardness in the directionally solidified Al-Si eutectic alloy.. Journal of

The efects of heat-treatment on the microstructure and phase transformations of Cu-25%Zn-4%Al and Cu-30%Zn- 4%Al alloys were investigated in this work. The alloys were prepared

In order to observe the efect of growth velocity and Fe content on microstructure and mechanical properties of Al–1.9Mn–xFe alloys, eutectic rod spacings, microhardness and

In the present work, we report on the effect of different calcination conditions of a hydrotalcite sample on the basic properties of the Mg,Al-mixed oxides so obtained and on

The effect of solidification processing parameters ( Sp and Ṫ ) and Si content on the secondary dendritic arm spacing (λ 2 ) and resulting hardness in hypoeutectic Al-Si alloys

The experimental results include solidification thermal parameters such as tip growth rate and cooling rate, optical microscopy, volume fraction of the eutectic mixture,

Spectra with the selected regions used in optimization for determination of Al, B, Ca, Cu, Fe, Mg, Mn, P, Si and Zn in plant materials: (a) obtained with the conditions optimized by