Development of High Strength Concrete Using Ferrochrome Slag Aggregate As Replacement to Coarse Aggregate

All percentage replacement of fine aggregate by copper slag the split tensile and flexural strength of concrete was more than normal mix. Compressive strength and

It is important to know the properties of cement, aggregate, and water, as they impart strength and durability to concrete of all the materials that influence

For a detailed analysis on Op.. concrete and abstract. While the former is concerned with, so to speak, conventional development, that is, based on transformation of real

n In [5], the inluence of coarse aggregate type on concrete prop- erties was studied, showing a relationship between concrete properties such as compressive strength, elastic

Based on the results obtained by the present work, it is possible to conclude that to obtain iron-carbon nuggets separated form the slag through carbothermic reduction of iron ores

It can be concluded that, due to the suitable strength and mechanical properties of the waste steel wire reinforced lightweight concrete compared to the plain lightweight

The E value of concrete also depends on the stiffness of coarse aggregate, interfacial zone between the aggregates and paste and the elastic properties of constituent

We considered all observational studies which asses- sed the frequency of these novel autoantibodies in JIIMs namely the anti-p155/140, anti-p140, anti-SAE, anti-CADM-140