• Nenhum resultado encontrado

Braz. J. Chem. Eng. vol.34 número2

N/A
N/A
Protected

Academic year: 2018

Share "Braz. J. Chem. Eng. vol.34 número2"

Copied!
24
0
0

Texto

Loading

Imagem

Figure 1.  (a) Schematic representation of the physical model (b) Computational domain (c) Close up view of the grid in  the vicinity of cylinders.
Table 1. Physical properties of the luid used Re ρ (Kg/m 3 ) m (Kg/m-s) n = 0.2 n = 0.4 n = 0.6 n = 0.8 n = 1 n = 1.2 0.1 0.1 0.01584 0.02511 0.03981 0.06309 0.1 0.15848 0.2 0.2 0.01584 0.02511 0.03981 0.06309 0.1 0.15848 0.5 0.5 0.01584 0.02511 0.03981 0.
Table 4. Details of grids used for the grid independence study
Table 7. Comparison between the present and literature values for Re = 100 and 40; G = 2 and 4; n = 1 Upper Cylinder Source C D C L Re = 40, n = 1, G = 2 Present 1.7064 0.3665 Kang, 2003 1.70 0.3651 Re = 100, n = 1, G = 4 Present 1.4686
+7

Referências

Documentos relacionados

eiciency of Zymomonas mobilis CCT4494 on loofa sponge and sugarcane bagasse for ethanol and levan production, and also to evaluate the reuse of immobilized cell mass in

Lipase production was observed in assays with rice bran, wheat bran or mixtures of both, but no positive results were found when soybean meal was present in the fermentation

Temperature, Ph and Carbon Source Af ect Drastically Indole Acetic Acid Production of Plant Growth Promoting Yeasts 433..

On the other hand, the CCRD1 and CCRD2, which used low component concentrations, led to ∆pH values within the range of ±1.0 (Figures 5b and 5c) , enabling

β-galactosidase from an inexpensive source, Cicer arietinum , was exploited to immobilize it on glutaraldehyde functionalized agarose (GFA) for the hydrolysis of lactose

Once the pressure and velocities fields are obtained, the drag and lift coefficients and the Strouhal number are calculated using the Lagrangian force field,

Benchmark results for the product of the Fanning friction factor-apparent Reynolds number, velocity field and Nusselt numbers were systematically tabulated and

From the unique identifiers of workers and establishments, we construct a large longitudinal data base that allows us to include various types of fixed effects to examine