Mat. Res. vol.18 número5

The association of these good conditions with a tough boride interlayer enabled the deposition of good quality and adherent diamond ilms on WC-Co substrates, as shown by

morphologies of as- synthesized In 2 O 3 nanoparticles were highly affected by γ-irradiation of indium acetyl acetonate precursor and by addition of sodium dodecyl sulphate

Based on these results, a possible mechanism is proposed to explain that the enhanced photocatalytic activity and stability of the Ag 3 PO 4 /Ag plasmonic photocatalyst is due to

For fcc L1 2 order, the easy axis of magnetization is (111) which is present in the ilms deposited on MgO substrate. The higher value Figure 2. X-Ray diffraction patterns of

Despite of SnSb 2 Te 4 phase can be synthesized with 2 h of milling, a careful analysis of the diffractograms of Figure 1 indicates displacement of the peaks as a function of

According to the obtained results, the wettability of SiC surface depends strongly on the temperature, as the resultant contact angle of the molten AlN/Re 2 O 3 compositions

EDS analysis of the surfaces showed titanium and oxygen to be the only elements in all groups, and all test group samples showed the presence of titanium hydride on the surface,

present work, we used the inite element method to calculate the stress concentration factor at the edge of a notch in a homogeneous ceramic plate and TiB FGM plate for different