GEOMETRY AND HEAD LOSS IN VENTURI INJECTORS THROUGH COMPUTATIONAL FLUID DYNAMICS

In the opening, it mentions the 86 thousand new titles that will be available at the festival and, throughout the text, describes the event - the fourth organized by the newspaper

O experimento foi realizado com uma amostra de 43 alunos dos cursos de licenciatura em Engenharia Informática da Universidade Fernando Pessoa, como já referido,

Semi-logarithmic plots of pooled normalized electro-olfactogram (EOG) amplitudes recorded from male tilapia (N=6) in response to pooled urine (A), faeces (B), plasma (C) and bile

decrease as compared to Ti, reaching an ~80% reduction when a longer spacer was used (Ch_AHA_Nt-Dhvar5 and Ch_GG_Nt- Dhvar5) (p < 0.05). These two Dhvar-bearing surfaces did

The total length, head length and body height variables in relation to the standard length; head height in relation to body height and eye diameter and head height

Variables studied were: physical properties of the solution, solution velocity through different diameters of jet nozzle, distance between the jet outlet nozzle and the copper

Figure 1 shows the main geometric characteristics of a conical nozzle: radius of the nozzle inlet (R 1 ); radius of curvature between the combustion chamber and the convergent

The dairy production potential for grazing livestock was estimated with basis on the NLE data of the bromatological analysis of grasses, which was based on the RGB image