• Nenhum resultado encontrado

Hidroturbinas en Brazil.- Tiago Filho

N/A
N/A
Protected

Academic year: 2021

Share "Hidroturbinas en Brazil.- Tiago Filho"

Copied!
2
0
0

Texto

(1)

Comitê Editorial - editorial commite

Presidente - President

Geraldo Lúcio Tiago Filho - CERPCH UNIFEI

Editores Associados - associated publishers

Ângelo Rezek - IEE UNIFEI

Augusto Nelson Carvalho Viana - IRN UNIFEI

Célio Bermann - IEE USP

José Carlos César Amorim - IME

Marcos Aurélio V. De Freitas - COPPE UFRJ

Zulcy de Souza LHPCH UNIFEI

Apresentação de Artigos

Os interessados em enviar artigos a serem publicados nesta revista devem encaminhá-los através do e-mail:

pchnoticias@unifei.edu.br

O material deverá ser aprovado pelo Comitê Editorial e estar dentro das seguintes normas de publicação:

»os artigos deverão possuir no máximo seis páginas (incluindo tabelas e figuras) em Word; em letra Times New Roman; corpo 11; espaçamento simples; margens inferior 2,5 cm, superior 2,5 cm, esquerda 3 cm e direita 3 cm e tamanho do papel A4 (210X297 mm). »A presença de figuras e tabelas. No entanto, é indispensável que o artigo contenha as refe-rências bibliográficas. O material deve ser enviado na língua original.

If you are interested in having your article published by this magazine, you must sent it to pchnoticias@unifei.edu.br. The article must be approved by the editorial committee and must fulfill the norms of the magazine: the article must not surpass six pages; front: times new roman 12; margin inferior 2,5 cm, superior 2,5 cm, left 3 cm and right 3 cm; paper size A4 (210X297 cm) and simple space. Tables and figures are optional. The article must have bibliography and must be sent in the author's native language.

Abstract

This paper presents the state of the art of free-flow hydropower turbine, also known as a hydrokinetic turbine in Brazil. This kind of turbine is designed to generate electricity using only the kinetic energy of water flow in rivers and is used to generate electricity in isolated communities in the inland of Brazil. Moreover it is relevant to say that the develo-ped technology has proved is necessary to be robust and suitable for the extremely severe conditions of the remote and isolated villages, since it is has been functioning uninterrup-tedly from several years with a minimum maintenance. This type of small hydrokinetic turbine typically can provide up to 2 kW of electric power, being a reliable alternative for the electrification of remote and isolated households, communities or social end-users.

1.Introduction

Brazil, due to its huge watersheds network, presents a great hydropower potential evaluated in 260 GW. From this situation only 66 GW, 77 % of the Brazilian electric matrix is designated to electric energy generation. The major part of this potential is located the Amazon Region. Which rivers are torrential, run in plains what complicates its use for generation purposes.

For the reason that there are vast distances between the communities, and due to the fact that the region is inhospitable and the com-munities are located in the margin of the rivers.. It is relevant to highlight the impor-tance of equipment development adequate to very low head and the use of hydrokinetic turbines.

The use of hydro kinetic energy

The use of kinetic energy on the rivers can be considered one of the first forms that men invented to transform natural energy, not only in navigation but also in the activation of water rod. Nowadays it is still common to find water pumps driven with the use of water rods located on the rivers.

The use of kinetic energy is considered to be an alternative or non-conventional form to generate electricity and has at its source a renewable energy supply. This technology is an advance in relation to environmental impacts, for it is not necessary to store potential energy in artificial lakes with the use of water dam, and so it consequently doesn't need to interfere with the natural course of rivers.

Even though it is recognized the importance of this kind of hydro power utilization were usually this kind of turbine are derived from wind turbines, even if its operation is similar.

2.The Brazilian experience on kinetic turbine

There are few references in Brazilian literature about the use of kinetic turbine to generate electricity and the knowledge in this field of application is equally poor.

One of the first papers is a report of a proto-type of a horizontal axis proto-type turbine develo-ped by Harwood- (1985) of the National Institute of Amazon Research (INPA). He utili-zed 4-meter diameter multi blade propeller wind of the type mills, which is anchored into the river to generate electricity. This equip-ment was experiequip-mented in rivers in the Amazon region with water velocities of 0,7 up

to 1,5 m/s and proved to be functional. However this equipment did not show being

robust enough to support an intense working regime and it did not have any protection against fluctuating debris and the mechanical transmission devices used in this system was made with chains and introduced significant losses and other operating problems.

In 1999 the Hydro-mechanic Laboratory of Federal University of Itajubá, LHPCH, makes a reference to a low head hydraulic central with a hydrokinetic turbine. In this paper Zulcy (1999) analyses the characteristics of vertical axis and axial turbines, of Cruz (1995) and shows that the power per unit is typically up to 2 kW for water velocities of 0,6 to 1,5 m/s. Another proposal of axial turbine was done by Alencar (2001) in LHPCH however due to lack of finan-cial resources the equipment was not built. Actually the project is passing through a re-study process and is waiting for financial sup-port liberation from fomentation

The of free-flow hydro turbines in Brazil

Geraldo Lúcio Tiago Filho, PhD.

UNIFEI / CERPCH

Figure 1- The kinetic energy used to drive

pumps, by water rods. Figure 2 Hydrokinetic turbine by Harwood (1985)

Figure 4. Hydrokitnetic Turbine by Alencar (2001)

(2)

The generator is out of the river, putted in the extreme point of a lever which pivot is fixed in one of the river margins. The runner of the turbine is inserted in water flow bringing down the lever. See figure 8.

Two models of turbines where tested and installed. Various blades compose the runner or propeller. Experiments where made, manu-facturing the blades with metallic strips and also with metallic structure involved with fiberglass. According to Els (2003) the num-ber of blades, the transversal area and its coe-fficient of solidity depend on the river flow. The best results for this turbine were obtained in river with a 2 m/s speed and a six blade, eighty centimeter, diameter propeller with a solidity coefficient of 30%.

To control the voltage generated by the turbine, which in this case tends to vary with the water velocity and the load coupled on its grid, an electronic control system was desig-ned. It maintains the electrical load on the grid constant in order to stabilize the grids voltage.

3.Conclusion

The hydrokinetic generation groups are ade-quate to decentralized generation. Once they are indicated to the assistance of small isola-ted riverside communities and might present robust conception and ease installation and maintenance. The limitation of this kind of equipment have been being viable to low potential, and hardly will surpass 10 kW. However, its use presents vantages regarding the environment once it does not demands water storage or water stream deviation work

Bibliography

ALENCAR, H. Water Current Turbine, in PCH Noticias & SHP News, year 3, number 11, ago/set/ou 2001. ELS, Rudi Henri van, CAMPOS, C., BALDUÍNO L, Henriques A M. Hydrokinetic Turbine for Isolated Villages, in X Encontro Latino Americano e do Caribe em Pequenos Aproveitamentos Hidroenergéticos, Poços de Cldas, Minas Gerais, Brasil, 4 a 8 maio 2003, p- 298-272.

NASCIMENTO, Marcos V. G. e outros. Opções à geração diesel elétrica para sistemas isolados na

região norte: eólica, hidrocinética e biomassa. IV Seminário Nacional de Produção e Transmissão de Energia Elétrica SNPTEE, Foz de Iguaçu, Paraná, 1999.

SOUZA, Zulcy de. PCH de baixa queda, Grupo de Trabajo sobre hidromecanica. 5a. reunión, IMFIA. Montevideo, Uruguay, 1999.

institutions.

The Center of Research in Electrical Energy CEPEL, (Nascimento- 1999) also did some mentions abaut a water rod adapted to gene-rate electrical energy and a axial type turbine. This first equipment, constructed in asso-ciation with a national manufacturer of water rods and the Federal University of Rio de Janeiro COPPE, has rods with width of 3 meters e diameter of 2 meters. It was moun-ted on floaters and had to generate 3,5 kW with water velocity of 1,5 m/s. The equip-ment, when in a functioning process with the placing of load, showed an accentuated reducing in the rods rotation, blocking its functioning.

Figure 5. Turbine CEPEL by water rods (Nascimento 1999)

According Els (2003), CEPEL made second experience with a prototype of a axial turbine in reduced scale (5/1) with a two bladed propeller. With this prototype measures where made to evaluate the influence of a converge mouthpiece at the entrance of the propeller. Nevertheless, the use of this device did not bring great increase in velocity.

According to ELS (2003), in Brazil, the most successful experience in the use of electric energy happened in the Department of Mechanical Engineering from the University of Brasilia UNB, which researching group has been studying and developing experiences with diverse prototypes of vertical and axial turbines, as shown in figures 6.

Figure 6 Prototypes made by UNB ELS (2003)

This project presents some innovations such as a bar in the turbine entrance and a stator at the entrance of the runner, which directs the water flow in the turbine. And that way to increase the attack angle of the blades of the propeller, optimizing the transformation of hydraulic energy. In addition to this, a suction tube is used at the outlet of the turbine and the use of cones in the center of the turbine to minimize the generating of turbulence in the water stream. This is shown in the figure 7.

The turbine is composed of a protecting grid (1), a stator with directing blades (2), propeller (3), suction tube (4), cone for the incoming and outgoing flows (5), transmission box (6)

Figure 7 Turbine axial parts made by UNB source Els (2003)

According to ELS (2003), the influence of the suction tube on the performance of the turbine was tested empirically in the field, and it was noted that there was a significant incre-ment in the overall performance of the turbine with the suction tube.

The mechanical transmission system is imple-mented with a set of gears submersed in oil and a stage of transmission belts. The turbine drive a 2 kVA, 220 volts AC electrical genera-tor in 1800 rpm, generating 1 kW of electricity.

técnicos

Figure 8 Photos of the turbines made by UNB. Source Els(2003)

Resumo

Este artigo propõe uma concepção de sistema, em certo sentido híbrido, consistindo de grupos-geradores hidrocinéticos, conhe-cidos na região como “cata-águas”, consorcia-dos com um pequeno gerador dieselétrico existente, que pode ser instalado em comuni-dades rurais típicas das margens dos rios da região amazônica. Além do benefício do fornecimento de energia elétrica, em geral quase inexistente, as próprias comunidades podem construir seu sistema. Dessa forma, são elencadas razões sócio-econômicas e parâmetros técnicos para esse fim.

Abstract

This paper proposes a system, in a certain way a hybrid system, that can supply electric energy to small communities among those typically established along Amazonian river margins, which consists of parallel hydro-kinetics turbine power sets, usually known in Amazon as 'cata-água' (in Portuguese), and set on parallel to an existing Diesel power set. Besides the poor benefit of surplus of electric energy most of the time, the hybrid systems can be built by the communities itself. The work elects social, economic and technical parameters for this purpose.

Introdução

A carência de eletricidade é fato antigo no interior amazônico. Numa região de dimen-sões continentais e população rarefeita, ainda persiste o cenário de carência de energia elétrica nas pequenas comunidades isoladas, obrigando os ribeirinhos à velha iluminação a lamparina.

A colonização da Amazônia concentrou os povoados nas margens dos rios mais próxi-mos da calha da bacia amazônica, região de planície alagada e onde há poucas chances para a construção de usinas que exijam repre-samento. No Estado do Amazonas, o maior da região e cujo interior é dos menos povoados, atualmente, 85% da população está na calha oriental do Rio Amazonas (IBGE, 1992) e é razoavelmente atendida pela concessionária local, a CEAM, no que pese seus eternos pro-blemas de caixa, falta de peças de reposição e o caro transporte de combustível. Os 15% restantes estão nas regiões mais elevadas, inacessíveis e distantes, o que contribui para sua carência de eletricidade. Em geral, a demanda per capita média no interior amazo-nense é da ordem de 0,04 kWe (Cruz, 1995). Em decorrência do grande vazio ocupacional da região, surgem comunidades dentro da área distrital dos municípios, geralmente em volta de um pequeno pólo econômico de exploração de produtos naturais (pau-rosa, andiroba, sorva, etc.), com população rara-mente excedendo 200 pessoas (IBGE, 1992). Algumas dessas comunidades chegam a distar 500 km da sede do município, sendo comum disporem de um pequeno grupo dieselétrico na faixa de 5 kVA que só funciona nos dias de festa.

Concepção do Sistema Híbrido

No contexto deste trabalho, idealizou-se um

sistema que opere 24 horas por dia, produ-zindo uma potência firme dimensionada assu-mindo como representativa para as comuni-dades isoladas da região uma população de 200 habitantes e a demanda per capita média de 0,04 kWe. Do total, foi tomado arbitraria-mente apenas metade, como forma de relevar o menor tamanho sócio-econômico dessas comunidades isoladas. A capacidade de um sistema para uma comunidade tipo assim é:

É esperado que a disponibilização de energia elétrica permita que as comunidades isoladas possam implementar algumas atividades econômicas e de subsistência, e. g. a produ-ção de farinha de mandioca (SUFRAMA,1999). O sistema concebido só deverá operar hibrida-mente quando o grupo dieselétrico tiver que ser acionado para atendimento de pontas, como à noite, durante festas comunitárias, porque é a inconstância de acesso ao óleo die-sel e o seu custo que não permitem operação econômica do eventual grupo existente, como se demonstra na próxima seção.

As duas geometrias hidrocinéticas potencial-mente aplicáveis, porque já foram investiga-das em Manaus, são descritas a seguir. - Cata-água do INPA: faz parte da família de rotores tipo hélice. Foi adaptado de um rotor de cata-vento multi-pá americano, com flutu-adores feitos com tambores de 200 litros (Harwood, 1980). O número de pás do protó-tipo (Fig. 1) foi reduzido para 8. A eficiência resultou baixa, mas estima-se que pode aumentar com desenvolvimento técnico. É uma alternativa de fácil execução com materi-ais locmateri-ais, que não exige mão-de-obra para funcionar. Nos EUA e Escócia já foram testa-dos rotores de hélice com duas a três pás, de alta eficiência.

Figura 1. Ilustração artística do cata-água do INPA.

- Darrieus tripá: este rotor deriva do rotor eólico de mesmo nome. A configuração

hidro-cinética de três pás retas com a forma de perfis aerodinâmicos biconvexos (Fig. 2) demonstrou possuir melhor eficiência que o cata-água, tanto experimental, como relatado pelo Instituto Canadense de Hidráulica (apud Cruz, 1995) onde os testes incorporaram várias idéias simples para implementação da eficiência; como teórica (Cruz, 1995).

Também pode ser construído com materiais locais e usar a idéia dos flutuadores com tam-bores do cata-água.

Figura 2. Ilustração artística do Darrieus-tripá.

As velocidades encontradas nas áreas mais altas dos rios amazônicos, em geral em altitu-des acima de 100 m, têm potencial para apro-veitamentos hidrocinéticos. Dados levantados por Harwood (apud Cruz, 1995) permitem adotar uma velocidade média de 1,5 m/s nes-sas regiões, no período das cheias.

Devido uma turbina hidrocinética só usar a energia cinética do curso d'água, suas dimen-sões são muito maiores dos que as turbinas hidráulicas convencionais, para uma mesma potência. Por isso, só é possível construir máquinas para potências muito baixas. A potência útil em [kWe] que um grupo-gerador hidrocinético pode extrair da correnteza é dada por (Cruz, 1995):

Onde Nhc é o rendimento total do grupo (0,7 a 0,85), Cp é o coeficiente de potência (máximo teórico de 0,593, o chamado limite de Betz), A [m2] é a área frontal do rotor e V [m/s] é a velocidade média do curso d'água defronte do rotor. Quanto mais rudimentar a confecção da máquina, menor o produto . No Canadá,

Micro-Geração de Eletricidade em Pequenas Comunidades Isoladas da

Amazônia com Grupos-Geradores Hidrocinéticos e Grupo Dieselétrico

Ricardo Wilson Aguiar da Cruz

Q =½?200hab.?0,04kWe/hab. = 4,0 kWe

3 p hc

u

½

η

C

g

A

V

P

=

Dado

Cata-Água

Darrieus

Potência elétrica

1 kW

1,5 kW

Diâmetro do rotor

4,0 m

1,2 m (4,0 m de altura)

Altura total do conjunto

5,5 m

5,3 m

Flutuadores

6 tb/200 l

6 tb/200 l

Rotação nominal

70 rpm

70 rpm

Velocidade da água

1,5 m/s

1,5 m/s

Densidade de potência frontal obtida

0,08

kWe/m

2

0,313

kWe/m

2

Fontes: Harwood (1980) e Cruz (1995).

1. Dados técnicos dos rotores hidrocinéticos

Referências

Documentos relacionados

O Plano Municipal de Arborização deverá prever: (a) medidas para evitar o plantio e ou promover a substituição de plantas que se aproximem da fiação elétrica e ou telefônica;

como os shopping centers, que passaram a ser lugares de recreação de uma parcela da população de maior poder aquisitivo; em segundo lugar, as novas formas de

mães e bebés que tem lugar no que ele chama ((trocas rituais ou de rotina)).. facto, o que ele tem investigado são as tro- cas lúdicas que se dão na altura de

6.4.1 Criança não utiliza comunicação escrita ou gestual 6.4.2. Criança [faz / aponta para / refere-se a] um registo escrito. Criança utiliza/aponta para um objeto/pessoa. Criança

I .D, (Grupo de Estudos de História da Viticultura Duriense e do Vinho do Porto), a funcionar na Faculdade de Letras da Universidade do Porto. Contam com a colaboração de

Para tanto foi realizada uma pesquisa descritiva, utilizando-se da pesquisa documental, na Secretaria Nacional de Esporte de Alto Rendimento do Ministério do Esporte

1 um militar do Exército responde de forma desrespeitosa ao seu superior hierárquico, sendo desencadeado um procedimento ou processo apuratório que, no seu curso ou ao final,

Ousasse apontar algumas hipóteses para a solução desse problema público a partir do exposto dos autores usados como base para fundamentação teórica, da análise dos dados