Evaluation of the Community Multiscale Air Quality (CMAQ) model v5.0 against size-resolved measurements of inorganic particle composition across sites in North America
Texto
Imagem
Documentos relacionados
In most air quality modeling applications with CMAQ, the SMOKE model is used to transform an emission inventory, such as the NEI, from a textual list of sources and their
A comparison of surface energy balance fluxes in an urban area indicated the UCM re- produces a realistic partitioning of sensible heat and latent heat fluxes, consequently
The sub-grid spatial variability of the annual mean NO 2 and NH 3 concentrations predicted by an atmospheric chemistry and transport model can be estimated by combining the
At the first stage of the measurements results analysis, the gear wheel cast surface image was compared with the casting mould 3D-CAD model (fig.. Next, the measurements results
Basing on the results of MANOVA test it has been observed that the strongest significant effect on an increase of the tensile strength R m exerted the addition of Mg, followed by
Subbotko, Methods of distribution of tool at units based on TM software of Guhring, Production Engineering Wroc ł aw University of Technology,(2006) 273- 280 (in Polish)..
In any urban community, irrespective of size and structure, the quality of housing, considered in terms of the degree of wear of residential areas components, is strongly influenced
agricultural fertilizer application in China, using an agricul- tural fertilizer modeling system which couples a regional air quality model (the Community Multi-scale Air Quality