Retrieval of the thickness of undeformed sea ice from simulated C-band compact polarimetric SAR images

The mean values and uncertainties of snow depth and ice and snow densities, determined for FY ice and MY ice, were used to calculate the total error in ice thickness retrieval

The probability of attending school four our group of interest in this region increased by 6.5 percentage points after the expansion of the Bolsa Família program in 2007 and

Northern Hemisphere ice sheets simulated by the GRISLI model at 18 ka BP, prior to Heinrich event 1, in terms of ice thickness (a) , ice velocities (b) and subsurface (550–1050 m)

Because of the increas- ing the speed of the decomposition of the anhydrite, together with the growth of the temperature of casting the bronze to the plaster mould, the gases

The two points considered at the alternate sides, of the tangents through the diameter of the circle, and then the line joining these points divides the circle

Methods applicable to the retrieval of climatologically and biologically significant melt pond fraction on FY ice data using satellite C-band SAR were developed from a com- bination

At the first stage of the measurements results analysis, the gear wheel cast surface image was compared with the casting mould 3D-CAD model (fig.. Next, the measurements results

Int. A.: Ice thickness distribution – measurement and theory, in: The Geophysics of Sea Ice, NATO ASI series B: physics, edited by: Untersteiner, N., Plenum, New York, 146,.. A.,