• Nenhum resultado encontrado

Effects of weathering on mechanical and morphological properties cork filled green polyethylene eco-composites

N/A
N/A
Protected

Academic year: 2021

Share "Effects of weathering on mechanical and morphological properties cork filled green polyethylene eco-composites"

Copied!
11
0
0

Texto

Loading

Imagem

Table 3. Summary of climatic conditions during the abiotic degradation test in the city of Teresina-PI.
Figure 1. Test samples of the matrix and eco-composites before (0 days) and after natural aging (45 and 90 days).
Figure 3. Images by OM on the surface of the GPE sample and its eco-composites before (0 days) and after the end of exposure to  abiotic degradation (90 days), with 40X magnifications: (a) GPE; (b) GPE/5PC; (c) GPE/10PC; (d) GPE/15PC; (e) GPE/5PC/5PEgMA;
Figure 4. SEM micrographs of the GPE and their eco-composites on the fracture surface before (0 days) and after exposure to abiotic  degradation (45 days and 90 days), with 300X magnifications: (a) GPE; (b) GPE/5PC; (c) GPE/10PC; (d) GPE/15PC; (e) GPE/5PC/
+3

Referências

Documentos relacionados

The study [4] on tensile properties of treated and untreated groundnut shell filled natural rubber composites reported that the tensile strength of the composite decreases

Moreover the analysis of the tensile mechanical properties, yield stress and elastic modulus, can be related to nanoparticle dispersion, and the analyzes of

According to the results observed in the graphs of elastic modulus and tensile strength (Figures 4 and 5, respectively), the change of properties caused by the nanoillers had the

The banana and carbon ibers reinforced hybrid composites were fabricated by hand lay-up process and the mechanical properties such as tensile strength, lexural strength, impact

The mechanical properties evaluations of the reinforced concrete with vegetable ibers were obtained through the compressive strength test; Tensile strength in lexion; Tensile

The probability of attending school four our group of interest in this region increased by 6.5 percentage points after the expansion of the Bolsa Família program in 2007 and

The mechanical properties evaluations of the reinforced concrete with vegetable fibers were obtained through the compressive strength test; Tensile strength in flexion; Tensile

To investigate mechanical properties, consistency of the elements produced by FDM additive manufacturing technology, mechanical tensile and compression tests were conducted on