• Nenhum resultado encontrado

J. Aerosp. Technol. Manag. vol.3 número3

N/A
N/A
Protected

Academic year: 2018

Share "J. Aerosp. Technol. Manag. vol.3 número3"

Copied!
2
0
0

Texto

Loading

Referências

Documentos relacionados

The object of study on the micromechanical analysis is the representative volume element (RVE), or unit cell, which is the smallest cell capable of representing

In this paper, the type of resonance considered is the commensurability between the frequencies of the satellite mean orbital motion and the Earth rotational one. Such case

Figure 7 shows a state space with the payload trajectory toward the state space origin, where: black solid line represents the payload state vector trajectory; red dashed

The MIR spectrum of the resulting sample is more similar to ammonium nitrate (Fig. 2B), indicating that, according to this route, this product is basically

The missile material is considered as being made out of a perfect electric conductor (without losses). The boundary conditions are set to open space. Figure 4 depicts

The technique serves to support the selection of alternatives to better control aircraft noise, since it helps identify which areas of the noise curves experienced greater

shows the complete model of Sonda III in scale 1:20 installed in the test section of TTP, with one end of the internal balance connected to the model and the other one

The VSB-30 vehicle is a two-stage, unguided, rail launched sounding rocket, consisting of a solid propellant S31 rocket booster, a boost adapter, the second stage S30,