• Nenhum resultado encontrado

Structure of X5CrNi18-10 and S355NL Steels after Remelting with the Electric Arc

N/A
N/A
Protected

Academic year: 2017

Share "Structure of X5CrNi18-10 and S355NL Steels after Remelting with the Electric Arc"

Copied!
4
0
0

Texto

Loading

Imagem

Fig. 1. Steel after remelting with different the current   of the electric arc a) X5CrNi18-10, b) S355NL
Fig. 4. The microstructure of X5CrNi18-10 steel after remelting with the electric arc: a) heat influence zones on the material,  b, c,) remelted zone, d) heat influence zone, e) substrate material - structure: austenite
Fig. 6. The average microhardness of the heat influenced zone   of the tested steels in the function of the current of the electric arc

Referências

Documentos relacionados

i) A condutividade da matriz vítrea diminui com o aumento do tempo de tratamento térmico (Fig.. 241 pequena quantidade de cristais existentes na amostra já provoca um efeito

não existe emissão esp Dntânea. De acordo com essa teoria, átomos excita- dos no vácuo não irradiam. Isso nos leva à idéia de que emissão espontânea está ligada à

Ousasse apontar algumas hipóteses para a solução desse problema público a partir do exposto dos autores usados como base para fundamentação teórica, da análise dos dados

Despercebido: não visto, não notado, não observado, ignorado.. Não me passou despercebido

The probability of attending school four our group of interest in this region increased by 6.5 percentage points after the expansion of the Bolsa Família program in 2007 and

Os resultados sugerem ainda que o flow tem um efeito significativo no bem-estar, isto é, indivíduos que relatam níveis de flow mais elevados na utilização de redes sociais

didático e resolva as ​listas de exercícios (disponíveis no ​Classroom​) referentes às obras de Carlos Drummond de Andrade, João Guimarães Rosa, Machado de Assis,