• Nenhum resultado encontrado

Adhesion at asphalt-aggregate interface through surface energy

N/A
N/A
Protected

Academic year: 2020

Share "Adhesion at asphalt-aggregate interface through surface energy"

Copied!
9
0
0

Texto

Loading

Imagem

Figure 1. Distresses on Flexible pavements from Bogotá D.C., Colombia, adapted data from Unidad de Mantenimiento  Vial (UMV)
Figure 4. Typical fingerprints after BBS test, (a) Cohesive Failure, (b) Adhesive Failure
Table 1 – Type of failure for each type of aggregate in dry and wet condition
Table 3 – Summary of Total Free Surface Energy(TFSE) and its Components
+2

Referências

Documentos relacionados

Além disso, conforme demonstrado por Cruz, Barreto, Falcão e Amaral (2017) o processo de internacionalização proposto pelo Modelo de Uppsala também não explica a criação de

The probability of attending school four our group of interest in this region increased by 6.5 percentage points after the expansion of the Bolsa Família program in 2007 and

Assim, foi feita a análise dos documentos que registram os atendimentos extraclasse – Atas do Atendimento Extraclasse (AE). Nas 450 atas analisadas, durante o período de fevereiro a

Synergistic Effect of 4A Zeolite from Rice Husk Ash without Aging Time and Silane on the Adhesion Properties of a Warm Mix Asphalt..

roughness, surface free energy, antimicrobial activity, bacterial adhesion and biocompatibility of DLC coating on titanium surfaces were also investigated and the results

Figure 3.24 – Schematic representation of adhesion samples, measures performed on the surface hardness test (left) and from surface cohesion test (right) on earth mortar

Figure 3.24 – Schematic representation of adhesion samples, measures performed on the surface hardness test (left) and from surface cohesion test (right) on earth mortar

In this work, numerical analysis provides information about three parameters used in pavement design: (i) displacement on the top of the asphalt surface layer; (ii) tensile stress