• Nenhum resultado encontrado

OPTIMIZATION OF OPERATING PARAMETERS FOR EDM PROCESS BASED ON THE TAGUCHI METHOD AND ARTIFICIAL NEURAL NETWORK

N/A
N/A
Protected

Academic year: 2017

Share "OPTIMIZATION OF OPERATING PARAMETERS FOR EDM PROCESS BASED ON THE TAGUCHI METHOD AND ARTIFICIAL NEURAL NETWORK"

Copied!
9
0
0

Texto

Loading

Imagem

Table 1 Process parameters and their levels
Table 2  Parameters and their levels for Taguchi method
Table 3 L 9  Orthogonal array
Table 4 Data set given for training
+3

Referências

Documentos relacionados

This paper reports the experimental investigation carried out on EDM to study the effects of machining parameters such as pulsed current on material removal rate, depth of cut,

In this paper, two intelligent methods for detecting cardiac arrhythmias based-on combination structure of artificial neural networks and the Optimization

This paper involves the multi(objective optimization of process parameters of AlSi10Mg/9 wt% alumina/3 wt% graphite in Electrical Discharge Machining for obtaining minimum

In the present paper an attempt has been made to study the effect of input parameters such as cutting speed, feed rate and depth of cut on Surface roughness, Tool wear,

In this paper, a scooter fault diagnosis system based on continuous wavelet transform technique and faults classification using artificial neural network for the purpose of the

The die casting process involves the use of a furnace, metal, die casting machine, and die. The metal, typically a non-ferrous alloy such as aluminum or zinc, is melted in the

A mathematical model functionally relating process parameters and operating parameters of a wire cut electric discharge machine (WEDM) is developed incorporating Artificial

Abstract: This research intends to develop a method based on the Artificial Neural Network (ANN) to predict permanent earthquake-induced deformation of the earth dams and